Date: Wed, 6 Feb 2002 22:52:18 +0100 From: Hendrik Scholz <hscholz@raisdorf.net> To: freebsd-current@freebsd.org Subject: ACPI error "Method execution failed, AE_AML_REGION_LIMIT" Message-ID: <20020212021154.769AD9F2A1@okeeffe.bestweb.net>
next in thread | raw e-mail | index | archive | help
Hi!
I updated my notebook from -stable to -current some days ago and get this
message ~ every second:
ACPI-0294: *** Error: Method execution failed, AE_AML_REGION_LIMIT
Copyright (c) 1992-2002 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD 5.0-CURRENT #1: Wed Feb 6 23:42:40 CET 2002
hscholz@deimos.raisdorf.net:/usr/src/sys/i386/compile/DEIMOS5
Preloaded elf kernel "/boot/kernel/kernel" at 0xc0442000.
Preloaded userconfig_script "/boot/kernel.conf" at 0xc04420a8.
Preloaded elf module "/boot/kernel/acpi.ko" at 0xc04420f8.
Timecounter "i8254" frequency 1193182 Hz
Timecounter "TSC" frequency 847427426 Hz
CPU: Pentium III/Pentium III Xeon/Celeron (847.43-MHz 686-class CPU)
Origin = "GenuineIntel" Id = 0x686 Stepping = 6
Features=0x387f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CM
OV,PAT,PSE36,PN,MMX,FXSR,SSE> real memory = 129957888 (126912K bytes)
avail memory = 122019840 (119160K bytes)
Pentium Pro MTRR support enabled
Using $PIR table, 3 entries at 0xc00f76b0
npx0: <math processor> on motherboard
npx0: INT 16 interface
acpi0: <AMIINT AMIINT10> on motherboard
ACPI-0294: *** Error: Method execution failed, AE_AML_REGION_LIMIT
Timecounter "ACPI" frequency 3579545 Hz
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x5008-0x500b on acpi0
acpi_cpu0: <CPU> on acpi0
acpi_tz0: <thermal zone> on acpi0
acpi_pcib0: <Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <PCI bus> on acpi_pcib0
atapci0: <SiS 5591 ATA66 controller> port
0xffa0-0xffaf,0x374-0x377,0x170-0x177,0x3f4-0x3f7,0x1f0-0x1f7 irq 0 at
device 0.1 on pci0 ata0: at 0x1f0 irq 14 on atapci0
ata1: at 0x170 irq 15 on atapci0
isab0: <PCI-ISA bridge> at device 1.0 on pci0
isa0: <ISA bus> on isab0
sis0: <SiS 900 10/100BaseTX> port 0xd000-0xd0ff mem 0xffdc0000-0xffdc0fff
irq 11 at device 1.1 on pci0 sis0: Ethernet address: 00:a0:cc:c5:62:c5
miibus0: <MII bus> on sis0
ukphy0: <Generic IEEE 802.3u media interface> on miibus0
ukphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
ohci0: <SiS 5571 USB controller> mem 0xffdd0000-0xffdd0fff irq 9 at device
1.2 on pci0 usb0: OHCI version 1.0, legacy support
usb0: <SiS 5571 USB controller> on ohci0
usb0: USB revision 1.0
uhub0: SiS OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 3 ports with 3 removable, self powered
ohci1: <SiS 5571 USB controller> mem 0xffde0000-0xffde0fff irq 9 at device
1.3 on pci0 usb1: OHCI version 1.0, legacy support
usb1: <SiS 5571 USB controller> on ohci1
usb1: USB revision 1.0
uhub1: SiS OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
pcm0: <SiS 7018> port 0xd400-0xd4ff mem 0xffdf0000-0xffdf0fff irq 10 at
device 1.4 on pci0 pci0: <simple comms> at device 1.6 (no driver attached)
pcib1: <PCI-PCI bridge> at device 2.0 on pci0
pci1: <PCI bus> on pcib1
pci1: <display, VGA> at device 0.0 (no driver attached)
pcic0: <O2micro 6812/6872 PCI-Cardbus Bridge> at device 3.0 on pci0
pcic0: PCI Memory allocated: 0x44000000
pcic0: Polling mode
pcic0: Warning: O2micro OZ68xx chips may not work
pccard0: <PC Card bus (classic)> on pcic0
acpi_cmbat0: <Control method Battery> on acpi0
acpi_acad0: <AC adapter> on acpi0
acpi_lid0: <Control Method Lid Switch> on acpi0
acpi_button0: <Sleep Button> on acpi0
acpi_button1: <Power Button> on acpi0
atkbdc0: <Keyboard controller (i8042)> port 0x64,0x60 irq 1 on acpi0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
kbd0 at atkbd0
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: model IntelliMouse, device ID 3
acpi_ec0: <embedded controller> port 0x66,0x62 on acpi0
fdc0: direction bit not set
fdc0: cmd 3 failed at out byte 1 of 3
sio0 port 0x3f8-0x3ff irq 4 on acpi0
sio0: type 16550A
fdc0: direction bit not set
fdc0: cmd 3 failed at out byte 1 of 3
ata: ata0 already exists; skipping it
ata: ata1 already exists; skipping it
atkbdc: atkbdc0 already exists; skipping it
pcic: pcic0 already exists; skipping it
sio: sio0 already exists; skipping it
sc: sc0 already exists; skipping it
vga: vga0 already exists; skipping it
orm0: <Option ROM> at iomem 0xc0000-0xcbfff on isa0
fdc0: cannot reserve I/O port range (6 ports)
pmtimer0 on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sio1 at port 0x2f8-0x2ff irq 3 on isa0
sio1: type 16550A
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
IP Filter: v3.4.20 initialized. Default = pass all, Logging = enabled
acpi_cpu: CPU throttling enabled, 8 steps from 100% to 12.5%
ACPI-0294: *** Error: Method execution failed, AE_AML_REGION_LIMIT
ACPI-0294: *** Error: Method execution failed, AE_AML_REGION_LIMIT
ad0: 14403MB <FUJITSU MHM2150AT> [29264/16/63] at ata0-master UDMA66
acd0: DVD-ROM <TOSHIBA DVD-ROM SD-C2502> at ata1-master PIO4
Mounting root from ufs:/dev/ad0s2a
ACPI-0294: *** Error: Method execution failed, AE_AML_REGION_LIMIT
...
The system is a Gericom Webboy notebook with a SiS630 chipset.
Playing around with the BIOS parameters seems not to help.
What could I do to get at least rid of the messages ?
Hendrik
--
Hendrik Scholz - <hscholz@raisdorf.net> - http://raisdorf.net/
Microsoft: where do you want to go today?
Linux: where do you want to go tomorrow?
*BSD: are you guys coming, or what?
To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-current" in the body of the message
To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-current" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20020212021154.769AD9F2A1>