Date: Sat, 31 Jul 2004 14:21:04 -0700 From: Gary Kline <kline@tao.thought.org> To: Scott Mitchell <scott+freebsd@fishballoon.org> Cc: FreeBSD Mobile Mailing List <freebsd-mobile@freebsd.org> Subject: Re: Thinkpad 600E and 5.2 Message-ID: <20040731212104.GB70627@tao.thought.org> In-Reply-To: <20040731163921.GB466@tuatara.fishballoon.org> References: <IOEHIPOKAPPDDMNJNKKGMEOJCFAA.peter@sandilands.vu> <20040729002424.061055D08@ptavv.es.net> <20040729170844.GA187@tao.thought.org> <20040731163921.GB466@tuatara.fishballoon.org>
next in thread | previous in thread | raw e-mail | index | archive | help
On Sat, Jul 31, 2004 at 05:39:21PM +0100, Scott Mitchell wrote: > On Thu, Jul 29, 2004 at 10:08:44AM -0700, Gary Kline wrote: > > Closer. After I rebuild the kernel with target OLDCARD, and > > rebooted (withh Xircom Ethernet II 10/100 inserted, no more > > kernel traps. > > > > I added > > > > pccard_ether xe0 start link0 > > > > to rc.conf and rebooted. Zero. The cabling is solid. > > The defaultrouter="10.0.0.1" entry doesn't seem to > > have any effect. I set get the "Setup PC-CARD" message > > when coming up. How do I get into this setup? Am I > > missing some sysctl cmd? Anything else? > > > > gary > > Hi Gary, > > Could you post your full /etc/rc.conf and /var/run/dmesg.boot? The > hardware you've got there should work, so I'm guessing this is just a > configuration issue. > > For reference, the only stuff I have in my rc.conf to enable xe0 on my > TP380D is: > ifconfig_xe0="DHCP" > pccard_enable="YES" > > If you're not using DHCP, obviously put something else in the ifconfig_xe0 > line. Using pccard_enable is important - you're running an OLDCARD kernel > so you need to make sure that pccardd is started to attach the card. > Hm. I'm running GENERIC again, after running with the OLDCARD configuration failed. The system does recognize my Xircom, but as "dc0" But when I boot with ifconfig_dc0="DHCP" I run into 'watchdog timeout' errs (prob'ly from dhclient). My card is a Xircom Ethernet II 10/100 CBE2-100. If your card is identical, I'll go back to the OLDCARD conf and try again. thanks much, gary -- Gary Kline kline@thought.org www.thought.org Public service Unix
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20040731212104.GB70627>