Date: Sat, 06 Oct 2012 16:42:33 -0700 From: Jin Guojun <jguojun@sbcglobal.net> To: bugs@FreeBSD.org, current@freebsd.org, usb@freebsd.org Cc: hackers@freebsd.org Subject: 9.1-RCs issues Message-ID: <5070C1E9.5000405@sbcglobal.net>
next in thread | raw e-mail | index | archive | help
1) moused stops functioning on 9.1-RC2. Neither PS2 nor USB mouse can work.
9.1-RC1 has no such problem.
2) All i386 / amd64 of 9.1-RC1/RC2 have USB read failure -- see dmesg
output at end of this email.
ada0 is internal SATA drive for system disk -- s# partitions: /, /tmp,
/var, /usr
s1 -- 6.4-Release
s2 -- 8.3-Release
s3 -- 9.1-RC2 amd64
s4 -- 9.1-RC2 i386 -- This slice also contains /home
da0 is external USB2 drive (300GB) plugged in USB2 port -- mounted on /mnt
operations failed by 9.1-RCs -- test directory has 2GB content
(failure is not related to data size;
a 4.7GB dir at the begining of the USB dirve can be copied
forth/back from SATA without problems).
cp -pr /mnt/test/* /home
cd /mnt; tar -cf - test | (cd /home; tar -xf -)
FreeBSD 6.4-R and 8.3-R have no problem at all on any direction of
disk I/O.
9.1-RC# read from SATA and write to USB seems OK -- may need a
bigger SATA drive to do more intensive check.
All 9.1-RC* completely failed for operating "cp -pr" from USB to
SATA -- see dmesg output below.
tarring the same test directory from USB to SATA will succeed with
many da0:umass-sim0 errors,
but have much less errors than "cp -pr". Have not checked the
content being copied.
-Jin
Copyright (c) 1992-2012 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 9.1-RC2 #0 r241133: Tue Oct 2 17:11:45 UTC 2012
root@obrian.cse.buffalo.edu:/usr/obj/usr/src/sys/GENERIC i386
CPU: AMD A4-3400 APU with Radeon(tm) HD Graphics (2699.94-MHz 686-class CPU)
Origin = "AuthenticAMD" Id = 0x300f10 Family = 12 Model = 1
Stepping = 0
Features=0x178bfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,MMX,FXSR,SSE,SSE2,HTT>
Features2=0x802009<SSE3,MON,CX16,POPCNT>
AMD
Features=0xee500800<SYSCALL,NX,MMX+,FFXSR,Page1GB,RDTSCP,LM,3DNow!+,3DNow!>
AMD
Features2=0x37ff<LAHF,CMP,SVM,ExtAPIC,CR8,ABM,SSE4A,MAS,Prefetch,OSVW,IBS,SKINIT,WDT>
TSC: P-state invariant, performance statistics
real memory = 8589934592 (8192 MB)
avail memory = 3398332416 (3240 MB)
Event timer "LAPIC" quality 400
ACPI APIC Table: <ALASKA A M I>
FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs
FreeBSD/SMP: 1 package(s) x 2 core(s)
cpu0 (BSP): APIC ID: 0
cpu1 (AP): APIC ID: 1
ACPI Warning: Optional field Pm2ControlBlock has zero address or length:
0x0000000000000000/0x1 (20110527/tbfadt-586)
ioapic0 <Version 2.1> irqs 0-23 on motherboard
kbd1 at kbdmux0
ctl: CAM Target Layer loaded
acpi0: <ALASKA A M I> on motherboard
ACPI Error: [RAMB] Namespace lookup failure, AE_NOT_FOUND
(20110527/psargs-392)
ACPI Exception: AE_NOT_FOUND, Could not execute arguments for [RAMW]
(Region) (20110527/nsinit-380)
acpi0: Power Button (fixed)
cpu0: <ACPI CPU> on acpi0
cpu1: <ACPI CPU> on acpi0
attimer0: <AT timer> port 0x40-0x43 irq 0 on acpi0
Timecounter "i8254" frequency 1193182 Hz quality 0
Event timer "i8254" frequency 1193182 Hz quality 100
atrtc0: <AT realtime clock> port 0x70-0x71 irq 8 on acpi0
Event timer "RTC" frequency 32768 Hz quality 0
hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0
Timecounter "HPET" frequency 14318180 Hz quality 950
Event timer "HPET" frequency 14318180 Hz quality 550
Event timer "HPET1" frequency 14318180 Hz quality 450
Timecounter "ACPI-fast" frequency 3579545 Hz quality 900
acpi_timer0: <32-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
vgapci0: <VGA-compatible display> port 0xf000-0xf0ff mem
0xd0000000-0xdfffffff,0xfeb00000-0xfeb3ffff irq 18 at device 1.0 on pci0
hdac0: <ATI (0x1714) HDA Controller> mem 0xfeb44000-0xfeb47fff irq 19 at
device 1.1 on pci0
xhci0: <XHCI (generic) USB 3.0 controller> mem 0xfeb4a000-0xfeb4bfff irq
18 at device 16.0 on pci0
xhci0: 32 byte context size.
usbus0 on xhci0
xhci1: <XHCI (generic) USB 3.0 controller> mem 0xfeb48000-0xfeb49fff irq
17 at device 16.1 on pci0
xhci1: 32 byte context size.
usbus1 on xhci1
atapci0: <AMD ATA controller> port
0xf190-0xf197,0xf180-0xf183,0xf170-0xf177,0xf160-0xf163,0xf150-0xf15f
mem 0xfeb51000-0xfeb517ff irq 19 at device 17.0 on pci0
ata2: <ATA channel> at channel 0 on atapci0
ata3: <ATA channel> at channel 1 on atapci0
ohci0: <OHCI (generic) USB controller> mem 0xfeb50000-0xfeb50fff irq 18
at device 18.0 on pci0
usbus2 on ohci0
ehci0: <EHCI (generic) USB 2.0 controller> mem 0xfeb4f000-0xfeb4f0ff irq
17 at device 18.2 on pci0
usbus3: EHCI version 1.0
usbus3 on ehci0
ohci1: <OHCI (generic) USB controller> mem 0xfeb4e000-0xfeb4efff irq 18
at device 19.0 on pci0
usbus4 on ohci1
ehci1: <EHCI (generic) USB 2.0 controller> mem 0xfeb4d000-0xfeb4d0ff irq
17 at device 19.2 on pci0
usbus5: EHCI version 1.0
usbus5 on ehci1
pci0: <serial bus, SMBus> at device 20.0 (no driver attached)
atapci1: <AMD ATA controller> port
0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xf100-0xf10f at device 20.1 on pci0
ata0: <ATA channel> at channel 0 on atapci1
ata1: <ATA channel> at channel 1 on atapci1
hdac1: <Generic (0x780d1022) HDA Controller> mem 0xfeb40000-0xfeb43fff
irq 16 at device 20.2 on pci0
isab0: <PCI-ISA bridge> at device 20.3 on pci0
isa0: <ISA bus> on isab0
pcib1: <ACPI PCI-PCI bridge> at device 20.4 on pci0
pci1: <ACPI PCI bus> on pcib1
ohci2: <OHCI (generic) USB controller> mem 0xfeb4c000-0xfeb4cfff irq 18
at device 20.5 on pci0
usbus6 on ohci2
pcib2: <ACPI PCI-PCI bridge> at device 21.0 on pci0
pci2: <ACPI PCI bus> on pcib2
pcib3: <ACPI PCI-PCI bridge> at device 21.1 on pci0
pci3: <ACPI PCI bus> on pcib3
alc0: <Atheros AR8151 v2.0 PCIe Gigabit Ethernet> port 0xe000-0xe07f mem
0xfea00000-0xfea3ffff irq 17 at device 0.0 on pci3
alc0: 11776 Tx FIFO, 12032 Rx FIFO
alc0: Using 1 MSI message(s).
miibus0: <MII bus> on alc0
atphy0: <Atheros F1 10/100/1000 PHY> PHY 0 on miibus0
atphy0: none, 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX,
1000baseT-FDX, 1000baseT-FDX-master, auto, auto-flow
alc0: Ethernet address: f4:6d:04:78:53:d2
acpi_button0: <Power Button> on acpi0
uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
pmtimer0 on isa0
orm0: <ISA Option ROM> at iomem 0xc0000-0xcefff pnpid ORM0000 on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
ppc0: parallel port not found.
acpi_throttle0: <ACPI CPU Throttling> on cpu0
hwpstate0: <Cool`n'Quiet 2.0> on cpu0
acpi_throttle1: <ACPI CPU Throttling> on cpu1
acpi_throttle1: failed to attach P_CNT
device_attach: acpi_throttle1 attach returned 6
Timecounters tick every 1.000 msec
hdacc0: <ATI R6xx HDA CODEC> at cad 0 on hdac0
hdaa0: <ATI R6xx Audio Function Group> at nid 1 on hdacc0
pcm0: <ATI R6xx (HDMI)> at nid 3 on hdaa0
hdacc1: <VIA VT1708S_0 HDA CODEC> at cad 0 on hdac1
hdaa1: <VIA VT1708S_0 Audio Function Group> at nid 1 on hdacc1
pcm1: <VIA VT1708S_0 (Analog 7.1+HP/2.0)> at nid 28,34,25,35,29 and
26,30,27 on hdaa1
pcm2: <VIA VT1708S_0 (Digital)> at nid 32 on hdaa1
pcm3: <VIA VT1708S_0 (Rear-panel Digital)> at nid 33 on hdaa1
usbus0: 5.0Gbps Super Speed USB v3.0
usbus1: 5.0Gbps Super Speed USB v3.0
usbus2: 12Mbps Full Speed USB v1.0
usbus3: 480Mbps High Speed USB v2.0
usbus4: 12Mbps Full Speed USB v1.0
usbus5: 480Mbps High Speed USB v2.0
usbus6: 12Mbps Full Speed USB v1.0
ugen0.1: <0x1022> at usbus0
uhub0: <0x1022 XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0
ugen1.1: <0x1022> at usbus1
uhub1: <0x1022 XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus1
ugen2.1: <AMD> at usbus2
uhub2: <AMD OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus2
ugen3.1: <AMD> at usbus3
uhub3: <AMD EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus3
ugen4.1: <AMD> at usbus4
uhub4: <AMD OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus4
ugen5.1: <AMD> at usbus5
uhub5: <AMD EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus5
ugen6.1: <AMD> at usbus6
uhub6: <AMD OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus6
uhub6: 2 ports with 2 removable, self powered
uhub2: 5 ports with 5 removable, self powered
uhub4: 5 ports with 5 removable, self powered
uhub0: 4 ports with 4 removable, self powered
uhub1: 4 ports with 4 removable, self powered
uhub3: 5 ports with 5 removable, self powered
uhub5: 5 ports with 5 removable, self powered
ugen3.2: <vendor 0x05e3> at usbus3
umass0: <vendor 0x05e3 USB TO IDE, class 0/0, rev 2.00/0.33, addr 2> on
usbus3
umass0: SCSI over Bulk-Only; quirks = 0x408c
umass0:5:0:-1: Attached to scbus5
ugen2.2: <SIGMACH1P> at usbus2
ukbd0: <SIGMACH1P USB Keyboard, class 0/0, rev 1.10/1.10, addr 2> on usbus2
kbd2 at ukbd0
uhid0: <SIGMACH1P USB Keyboard, class 0/0, rev 1.10/1.10, addr 2> on usbus2
ada0 at ata3 bus 0 scbus1 target 0 lun 0
ada0: <ST3250310AS 4.AAA> ATA-7 SATA 2.x device
ada0: 33.300MB/s transfers (UDMA2, PIO 8192bytes)
ada0: 238475MB (488397168 512 byte sectors: 16H 63S/T 16383C)
ada0: Previously was known as ad6
da0 at umass-sim0 bus 0 scbus5 target 0 lun 0
da0: <MAXTOR S TM3320620A 0811> Fixed Direct Access SCSI-0 device
da0: 40.000MB/s transfers
da0: 305245MB (625142448 512 byte sectors: 255H 63S/T 38913C)
cd0 at ata3 bus 0 scbus1 target 1 lun 0
SMP: AP CPU #1 Launched!
cd0: <TSSTcorp DVD-ROM TS-H353B D200> Removable CD-ROM SCSI-0 device
cd0: 33.300MB/s transfers (UDMA2, ATAPI 12bytes, PIO 8192bytes)
cd0: Attempt to query device size failed: NOT READY, Medium not present
- tray closed
Timecounter "TSC-low" frequency 10546628 Hz quality 800
Trying to mount root from ufs:/dev/ada0s4a [rw]...
(da0:umass-sim0:0:0:0): READ(10). CDB: 28 0 1f 98 90 cf 0 0 1 0
(da0:umass-sim0:0:0:0): CAM status: CCB request completed with an error
(da0:umass-sim0:0:0:0): Retrying command
(da0:umass-sim0:0:0:0): READ(10). CDB: 28 0 1f 98 90 cf 0 0 1 0
(da0:umass-sim0:0:0:0): CAM status: CCB request completed with an error
(da0:umass-sim0:0:0:0): Retrying command
(da0:umass-sim0:0:0:0): READ(10). CDB: 28 0 1f 98 90 cf 0 0 1 0
(da0:umass-sim0:0:0:0): CAM status: CCB request completed with an error
(da0:umass-sim0:0:0:0): Retrying command
(da0:umass-sim0:0:0:0): READ(10). CDB: 28 0 1f 98 90 cf 0 0 1 0
(da0:umass-sim0:0:0:0): CAM status: CCB request completed with an error
(da0:umass-sim0:0:0:0): Retrying command
(da0:umass-sim0:0:0:0): READ(10). CDB: 28 0 1f 98 90 cf 0 0 1 0
(da0:umass-sim0:0:0:0): CAM status: CCB request completed with an error
(da0:umass-sim0:0:0:0): Error 5, Retries exhausted
g_vfs_done():da0s1[WRITE(offset=271310766080, length=16384)]error = 5
g_vfs_done():da0s1[WRITE(offset=271310815232, length=16384)]error = 5
g_vfs_done():da0s1[WRITE(offset=271310831616, length=16384)]error = 5
g_vfs_done():da0s1[WRITE(offset=271310848000, length=16384)]error = 5
g_vfs_done():da0s1[WRITE(offset=271310864384, length=16384)]error = 5
g_vfs_done():da0s1[WRITE(offset=271310880768, length=16384)]error = 5
g_vfs_done():da0s1[READ(offset=271407194112, length=512)]error = 5
vnode_pager_getpages: I/O read error
vm_fault: pager read error, pid 1305 (cp)
(da0:umass-sim0:0:0:0): READ(10). CDB: 28 0 1f 95 b0 63 0 0 4 0
(da0:umass-sim0:0:0:0): CAM status: CCB request completed with an error
(da0:umass-sim0:0:0:0): Retrying command
ugen2.3: <Logitech> at usbus2
ukbd1: <Logitech USB Receiver, class 0/0, rev 2.00/12.01, addr 3> on usbus2
kbd3 at ukbd1
ums0: <Logitech USB Receiver, class 0/0, rev 2.00/12.01, addr 3> on usbus2
ums0: 16 buttons and [XYZT] coordinates ID=2
uhid1: <Logitech USB Receiver, class 0/0, rev 2.00/12.01, addr 3> on usbus2
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?5070C1E9.5000405>