Date: Sun, 24 Jan 2021 14:03:37 GMT From: Gordon Bergling <gbe@FreeBSD.org> To: src-committers@FreeBSD.org, dev-commits-src-all@FreeBSD.org, dev-commits-src-main@FreeBSD.org Subject: git: 1f73236b0302 - main - Add a manual page for axp(4) / AMD 10G Ethernet driver Message-ID: <202101241403.10OE3bOD074105@gitrepo.freebsd.org>
next in thread | raw e-mail | index | archive | help
The branch main has been updated by gbe (doc committer): URL: https://cgit.FreeBSD.org/src/commit/?id=1f73236b0302cdf47630c99687c2dfd4e514ab54 commit 1f73236b0302cdf47630c99687c2dfd4e514ab54 Author: Gordon Bergling <gbe@FreeBSD.org> AuthorDate: 2021-01-24 13:57:16 +0000 Commit: Gordon Bergling <gbe@FreeBSD.org> CommitDate: 2021-01-24 13:57:16 +0000 Add a manual page for axp(4) / AMD 10G Ethernet driver Submitted by: Rajesh Kumar <rajesh1 dot kumar at amd dot com> Reviewed by: bcr, brueffer, rpokala MFC after: 2 weeks Differential Revision: https://reviews.freebsd.org/D27800 --- share/man/man4/Makefile | 1 + share/man/man4/axp.4 | 225 ++++++++++++++++++++++++++++++++++++++++++++++++ 2 files changed, 226 insertions(+) diff --git a/share/man/man4/Makefile b/share/man/man4/Makefile index ffc7a08292e9..10034a72d608 100644 --- a/share/man/man4/Makefile +++ b/share/man/man4/Makefile @@ -69,6 +69,7 @@ MAN= aac.4 \ aue.4 \ axe.4 \ axge.4 \ + axp.4 \ bce.4 \ bcma.4 \ bfe.4 \ diff --git a/share/man/man4/axp.4 b/share/man/man4/axp.4 new file mode 100644 index 000000000000..598e6a968e7a --- /dev/null +++ b/share/man/man4/axp.4 @@ -0,0 +1,225 @@ +.\" Copyright (c) 2020, Advanced Micro Devices Inc. +.\" All rights reserved. +.\" +.\" Redistribution and use in source and binary forms, with or without +.\" modification, are permitted provided that the following conditions are met: +.\" +.\" 1. Redistributions of source code must retain the above copyright notice, +.\" this list of conditions and the following disclaimer. +.\" +.\" 2. Redistributions in binary form must reproduce the above copyright +.\" notice, this list of conditions and the following disclaimer in the +.\" documentation and/or other materials provided with the distribution. +.\" +.\" 3. Neither the name of Advanced Micro Devices Inc., nor the names of its +.\" contributors may be used to endorse or promote products derived from +.\" this software without specific prior written permission. +.\" +.\" THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" +.\" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE +.\" IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE +.\" ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE +.\" LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR +.\" CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF +.\" SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS +.\" INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN +.\" CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) +.\" ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE +.\" POSSIBILITY OF SUCH DAMAGE. +.\" +.\" * Other names and brands may be claimed as the property of others. +.\" +.Dd January 24, 2021 +.Dt AXP 4 +.Os +.Sh NAME +.Nm axp +.Nd "Advanced Micro Devices 10G Ethernet driver" +.Sh SYNOPSIS +To compile this driver into the kernel, +place the following lines in your +kernel configuration file: +.Bd -ragged -offset indent +.Cd "device iflib" +.Cd "device axp" +.Ed +.Pp +Alternatively, to load the driver as a +module at boot time, place the following line in +.Xr loader.conf 5 : +.Bd -literal -offset indent +if_axp_load="YES" +.Ed +.Sh DESCRIPTION +The +.Nm +driver enables PCI-E based 10G Ethernet controller inbuilt in the +AMD EPYC processors. +.Pp +The following features are supported. +.Pp +.Bl -bullet -compact +.It +1G/10G SFP+ Link +.It +Jumbo frames (9000 Bytes) +.It +Transmit and Receive checksum offload +.It +TCP segmentation offload (TSO) +.It +VLAN tag insertion/extraction +.It +VLAN checksum offload +.It +VLAN TSO +.It +Receive side steering (RSS) +.It +IPV4 and IPV6 capable +.It +MSI-X interrupts +.It +Split header +.El +.Pp +All the above mentioned features are enabled by default. +.Pp +For hardware related questions, please refer the documentation supplied +along with AMD EPYC processors. +.Sh SYSCTL VARIABLES +The following variables are available as +.Xr sysctl 8 +variables: +.Bl -tag -width indent +.It Va dev.ax.X.mac_stats +Dumps the transmit and receive statistics counter values for the controller. +This includes statistics specific to each transmit and receive queue. +.It Va dev.ax.X.channels_info +Dumps the permissible and default configured transmit and receive channel +information. +.It Va dev.ax.X.ringparam_info +Dumps the permissible and default configured descriptor information for the +transmit and receive queue. +.It Va dev.ax.X.link_ksettings_info +Dumps the current link setting like link mode, speed, duplex settings. +.It Va dev.ax.X.pauseparam_info +Dumps the current flow-control settings. +.It Va dev.ax.X.coalesce_info +Dumps the current interrupt coalescing settings. +.It Va dev.ax.X.link_info +Dumps the current state of the Link. +.It Va dev.ax.X.drv_info +Dumps the driver and controller firmware version information. +.It Va dev.ax.X.YYYY_register +.It Va dev.ax.X.YYYY_register_values +Sysctl to dump a specific register from a specific block of the controller. +YYYY specifies the block. +The following blocks are supported. +.Bl -bullet -compact +.It +xpcs +.It +xgmac +.It +xprop +.It +xi2c +.El +.Pp +Set the offset of the register to the first variable, and then read the value +of the register by reading the second variable. +.It Va dev.ax.X.axgbe_debug_level +Configure the log-level for the driver. +Default is 0. +Supports 0-3. +.It Va dev.ax.X.single_fl +This variable must be set before loading the driver, either via +.Xr loader.conf 5 +or through the use of +.Xr kenv 1 . +This cannot be modified when driver is loaded. +.Pp +Setting this variable in +.Xr loader.conf 5 +needs the system to be restarted to take effect. +When using +.Xr kenv 1 , +use the wrapper variable +.Va dev.ax.single_fl\&, +which will configure all AMD interfaces with single freelist per receive queue. +Default is 2 freelist per receive queue. +.Pp +This variable is to configure the interface when single freelist is needed. +(For Eg. netmap). +Basically, this will control the software behavior of how the receive +descriptors are used. +.Pp +Setting this variable to 1, will use 1 Freelist per receive queue. +.Pp +Setting this variable to 0, will use 2 Freelist per receive queue. +.Pp +Based on the setting, the receive buffers are programmed accordingly on the +received descriptors. +.Pp +By default, this variable will be set to 0, meaning the interfaces will be +configured for regular data traffic (not netmap traffic). +.It Va dev.ax.X.sph_enabled +This variable must be set before loading the driver, either via +.Xr loader.conf 5 +or through the use of +.Xr kenv 1 . +This cannot be modified when driver is loaded. +.Pp +Setting this variable in +.Xr loader.conf 5 +needs the system to be restarted to take effect. +When using +.Xr kenv 1 , +use the wrapper variable +.Va dev.ax.sph_enable\&, +which will configure(enable/disable) split header support in all +AMD interfaces. +.Pp +This variable is to control enable/disable of the split header feature in +the interface. +.Pp +Setting this variable to 1, will enable split header feature. +.Pp +Setting this variable to 0, will disable split header feature. +.Pp +By default, this variable will be set to 1, meaning the Split header support be +enabled. +.Pp +NOTE: It is recommended to use this variable only when +.Va single_fl\& +is configured. +Otherwise let it be default value. +.El +.Sh SEE ALSO +.Xr arp 4 , +.Xr iflib 4 , +.Xr netmap 4 , +.Xr vlan 4 , +.Xr ifconfig 8 +.Sh HISTORY +The +.Nm +device driver first appeared in +.Fx 13.0 . +.Pp +Another version of the driver is already present in +.Fx . +This driver was named as "axgbe" earlier, which is renamed as "axa" now. +This driver is for the ACPI based Ethernet controllers in the previous/older +version of the hardware. +This driver is authored by +.Aq Mt andrew@FreeBSD.org . +.Sh AUTHORS +The +.Nm +device driver was written by +.An Advanced Micro Devices Inc . +.Pp +For any issues and support requirements, email the details to +.Aq Mt rajesh1.kumar@amd.com .
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?202101241403.10OE3bOD074105>