Skip site navigation (1)Skip section navigation (2)
Date:      Sat, 14 Sep 2002 20:35:20 +0200
From:      "Bartosz" <brehtacz@interia.pl>
To:        <questions@FreeBSD.org>
Subject:   4.7-Prerelase and agp problems
Message-ID:  <000701c25c1d$7b67c380$0201a8c0@bezet.pl>

next in thread | raw e-mail | index | archive | help
Hello

I have working FreeBSD 4.6.2 and graphic card on motherbord (I810), done by
instructions in handbook (section 5.4.3.1) and all is ok. I have updated
system to FreeBSD 4.7-PRERELASE and XFree86 don't work.What is a problem?

I've recompiled kernel with:

device agp

dmesg -a

Copyright (c) 1992-2002 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
        The Regents of the University of California. All rights reserved.
FreeBSD 4.7-PRERELEASE #0: Sat Sep 14 18:50:47 CEST 2002
    root@kropka.bezet.pl:/usr/src/sys/compile/KROPKA
Timecounter "i8254"  frequency 1193182 Hz
CPU: Pentium III/Pentium III Xeon/Celeron (601.17-MHz 686-class CPU)
  Origin = "GenuineIntel"  Id = 0x683  Stepping = 3

Features=0x383f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,
PAT,PSE36,MMX,FXSR,SSE>
real memory  = 133103616 (129984K bytes)
avail memory = 126451712 (123488K bytes)
Preloaded elf kernel "kernel" at 0xc030d000.
Pentium Pro MTRR support enabled
md0: Malloc disk
Using $PIR table, 7 entries at 0xc00fdf00
npx0: <math processor> on motherboard
npx0: INT 16 interface
pcib0: <Intel 82810 (i810 GMCH) Host To Hub bridge> on motherboard
pci0: <PCI bus> on pcib0
agp0: <Intel 82810 (i810 GMCH) SVGA controller> mem
0xd4100000-0xd417ffff,0xd0000000-0xd3ffffff irq 11 at device 1.0 on pci0
agp0: unknown memory configuration, disabling
device_probe_and_attach: agp0 attach returned 22

[cut]

Where i can configure memory for agp card? Where i can read about it?

Second problem:

This mothermoard have bulid in sound card ac97. How to configure it or where
i can read about it.

I've done:

Kernel:

device pcm
options PNPBIOS

dmesg -a returns problems:

unknown: <PNP0000> can't assign resources
unknown: <PNP0303> can't assign resources
unknown: <PNP0f13> can't assign resources
unknown: <PNP0c02> can't assign resources
unknown: <PNP0501> can't assign resources
unknown: <PNP0700> can't assign resources

Sound is on console, KDE cant dind device.

thanx 4 answers

brehtacz


----------------------------------------------------------------------
Odwiedzaj mnie codziennie! >>> http://link.interia.pl/f164f 



To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-questions" in the body of the message




Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?000701c25c1d$7b67c380$0201a8c0>