Date: Sun, 10 Dec 2000 02:42:32 +0100 (CET) From: jfait <jfait@voodoo.synux.de> To: questions@freebsd.org Subject: lpt0/ppbus0 Message-ID: <Pine.BSF.3.96.1001210023328.2721A-100000@voodoo.synux.de>
next in thread | raw e-mail | index | archive | help
Help!
My printer does not work with FreeBSd, although it works fine with linux-
the hardware is all the same so I guess its my fault...your help is highly
welcome, please reply to jgfa@gmx.de
___________________________________________
FreeBSD 3.4-RELEASE #0: Mon Dec 20 06:54:39 GMT 1999
jkh@time.cdrom.com:/usr/src/sys/compile/GENERIC
Timecounter "i8254" frequency 1193182 Hz
CPU: AMD-K6(tm) 3D processor (451.03-MHz 586-class CPU)
Origin = "AuthenticAMD" Id = 0x58c Stepping = 12
Features=0x8021bf<FPU,VME,DE,PSE,TSC,MSR,MCE,CX8,PGE,MMX>
AMD Features=0x80000800<SYSCALL,3DNow!>
real memory = 67108864 (65536K bytes)
avail memory = 61747200 (60300K bytes)
Preloaded elf kernel "kernel" at 0xc035c000.
Probing for devices on PCI bus 0:
chip0: <VIA 82C598MVP (Apollo MVP3) host bridge> rev 0x04 on pci0.0.0
chip1: <VIA 82C598MVP (Apollo MVP3) PCI-PCI bridge> rev 0x00 on pci0.1.0
chip2: <VIA 82C586 PCI-ISA bridge> rev 0x47 on pci0.7.0
ide_pci0: <VIA 82C586x (Apollo) Bus-master IDE controller> rev 0x06 on
pci0.7.1
chip3: <VIA 82C586B ACPI interface> rev 0x10 on pci0.7.3
vga0: <S3 Trio graphics accelerator> rev 0x54 int a irq 10 on pci0.8.0
Probing for devices on PCI bus 1:
Probing for PnP devices:
Probing for devices on the ISA bus:
Probing for PnP devices on ppbus0:
ppbus0: <Canon BJC-2000/1.01> PRINTER BJL,BJRaster,BSCC,TXT01
lpt0: <generic printer> on ppbus 0
lpt0: Interrupt-driven port
ppi0: <generic parallel i/o> on ppbus 0
plip0: <PLIP network interface> on ppbus 0
voodoo# lpc status all
lp:
queuing is enabled
printing is enabled
1 entry in spool area
printer idle
raw:
queuing is enabled
printing is enabled
no entries in spool area
printer idle
______________________________
ok, the printer did not print anything...
so I try again:
lptest 20 5 |lpr
voodoo# lpc status all
lp:
queuing is enabled
printing is enabled
2 entries in spool area
lp is ready and printing
raw:
queuing is enabled
printing is enabled
no entries in spool area
printer idle
______________________any idea ?
note : I am pretty familiar with AIX, HP-UX, SINIX and linux- Im outwitted
by now..TNX for being helpful, judith
To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-questions" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?Pine.BSF.3.96.1001210023328.2721A-100000>