Date: Wed, 26 Feb 2014 23:16:21 +0400 From: Sergey Matveychuk <sem@FreeBSD.org> To: John Baldwin <jhb@freebsd.org>, freebsd-stable@freebsd.org Subject: Re: Fwd: panic after upgrade to 10 Message-ID: <530E3D85.8060906@FreeBSD.org> In-Reply-To: <201402261124.01275.jhb@freebsd.org> References: <5308B98C.6070807@semmy.ru> <5308BD0A.2050506@FreeBSD.org> <201402261124.01275.jhb@freebsd.org>
next in thread | previous in thread | raw e-mail | index | archive | help
[-- Attachment #1 --] Yes, no panic now. For some reason agp0 is Intel 82855GM host to AGP bridge and agp1 is VGA controller itself. I've attached dmesg and pciconf output. Please, note, i've filled kern/187015 for this problem. 26.02.2014 20:24, John Baldwin пишет: > On Saturday, February 22, 2014 10:06:50 am Sergey Matveychuk wrote: >> Hi. >> >> I've tried to upgrade my home router to FreeBSD 10-STABLE from 8.x. And >> got this panic: https://www.dropbox.com/s/fxsily501x50vtw/A8eRRRJKbYM.jpg >> >> panic: make_dev_credv: bad si_name (error=17, si_name=agpgart) >> >> How it could be fixed or how work around to boot? > > I think the problem is there can only be one /dev/agpgart and this tried to > create two. Odd that you would have two agp devices though. > > Try this patch which should fix the panic, but then capture a dmesg and > 'pciconf -lcb' output. > > Index: sys/dev/agp.c > =================================================================== > --- agp.c (revision 262488) > +++ agp.c (working copy) > @@ -212,6 +212,7 @@ int > agp_generic_attach(device_t dev) > { > struct agp_softc *sc = device_get_softc(dev); > + struct cdev *cdev; > int i; > u_int memsize; > > @@ -256,10 +257,11 @@ agp_generic_attach(device_t dev) > TAILQ_INIT(&sc->as_memory); > sc->as_nextid = 1; > > - sc->as_devnode = make_dev(&agp_cdevsw, > - 0, UID_ROOT, GID_WHEEL, 0600, "agpgart"); > - sc->as_devnode->si_drv1 = dev; > - > + if (make_dev_p(MAKEDEV_CHECKNAME, &cdev, &agp_cdevsw, NULL, UID_ROOT, > + GID_WHEEL, 0600, "agpgart") == 0) { > + cdev->si_drv1 = dev; > + sc->as_devnode = cdev; > + } > return 0; > } > > @@ -268,7 +270,8 @@ agp_free_cdev(device_t dev) > { > struct agp_softc *sc = device_get_softc(dev); > > - destroy_dev(sc->as_devnode); > + if (sc->as_devnode != NULL) > + destroy_dev(sc->as_devnode); > } > > void > > [-- Attachment #2 --] ACPI BIOS Error (bug): A valid RSDP was not found (20130823/tbxfroot-223) Copyright (c) 1992-2014 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD is a registered trademark of The FreeBSD Foundation. FreeBSD 10.0-STABLE #1 r262330M: Wed Feb 26 23:05:09 MSK 2014 root@router.home.semmy.ru:/usr/obj/usr/src/sys/GENERIC i386 FreeBSD clang version 3.3 (tags/RELEASE_33/final 183502) 20130610 CPU: Intel(R) Celeron(R) M processor 1.50GHz (1499.86-MHz 686-class CPU) Origin = "GenuineIntel" Id = 0x6d8 Family = 0x6 Model = 0xd Stepping = 8 Features=0xafe9fbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,TM,PBE> real memory = 1039073280 (990 MB) avail memory = 995766272 (949 MB) MPTable: <OEM00000 PROD00000000> Event timer "LAPIC" quality 400 ioapic0: Assuming intbase of 0 ioapic0 <Version 2.0> irqs 0-23 on motherboard kbd1 at kbdmux0 random: <Software, Yarrow> initialized ACPI BIOS Error (bug): A valid RSDP was not found (20130823/tbxfroot-223) ACPI: Table initialisation failed: AE_NOT_FOUND ACPI: Try disabling either ACPI or apic support. pcib0: <MPTable Host-PCI bridge> pcibus 0 on motherboard pci0: <PCI bus> on pcib0 agp0: <Intel 82855GM host to AGP bridge> on hostb0 pci0: <base peripheral> at device 0.1 (no driver attached) pci0: <base peripheral> at device 0.3 (no driver attached) pcib1: <PCI-PCI bridge> at device 1.0 on pci0 pci1: <PCI bus> on pcib1 vgapci0: <VGA-compatible display> port 0xe900-0xe907 mem 0xe0000000-0xe7ffffff,0xec200000-0xec27ffff irq 16 at device 2.0 on pci0 agp1: <Intel 8285xM (85xGM GMCH) SVGA controller> on vgapci0 agp1: aperture size is 128M, detected 32636k stolen memory vgapci0: Boot video device vgapci1: <VGA-compatible display> at device 2.1 on pci0 uhci0: <Intel 82801DB (ICH4) USB controller USB-A> port 0xeb00-0xeb1f irq 16 at device 29.0 on pci0 usbus0 on uhci0 uhci1: <Intel 82801DB (ICH4) USB controller USB-B> port 0xed00-0xed1f irq 19 at device 29.1 on pci0 usbus1 on uhci1 uhci2: <Intel 82801DB (ICH4) USB controller USB-C> port 0xe800-0xe81f irq 18 at device 29.2 on pci0 usbus2 on uhci2 ehci0: <Intel 82801DB/L/M (ICH4) USB 2.0 controller> mem 0xec280000-0xec2803ff irq 23 at device 29.7 on pci0 usbus3: EHCI version 1.0 usbus3 on ehci0 pcib2: <MPTable PCI-PCI bridge> at device 30.0 on pci0 pci2: <PCI bus> on pcib2 em0: <Intel(R) PRO/1000 Legacy Network Connection 1.0.6> port 0xd000-0xd03f mem 0xec000000-0xec01ffff,0xec020000-0xec03ffff irq 16 at device 0.0 on pci2 em0: Ethernet address: 00:30:18:4a:4d:f0 em1: <Intel(R) PRO/1000 Legacy Network Connection 1.0.6> port 0xd100-0xd13f mem 0xec040000-0xec05ffff,0xec060000-0xec07ffff irq 17 at device 1.0 on pci2 em1: Ethernet address: 00:30:18:4a:4d:f1 em2: <Intel(R) PRO/1000 Legacy Network Connection 1.0.6> port 0xd200-0xd23f mem 0xec080000-0xec09ffff,0xec0a0000-0xec0bffff irq 18 at device 2.0 on pci2 em2: Ethernet address: 00:30:18:4a:4d:f2 em3: <Intel(R) PRO/1000 Legacy Network Connection 1.0.6> port 0xd300-0xd33f mem 0xec0c0000-0xec0dffff,0xec0e0000-0xec0fffff irq 19 at device 3.0 on pci2 em3: Ethernet address: 00:30:18:4a:4d:f3 isab0: <PCI-ISA bridge> at device 31.0 on pci0 isa0: <ISA bus> on isab0 atapci0: <Intel ICH4 UDMA100 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xf000-0xf00f at device 31.1 on pci0 ata0: <ATA channel> at channel 0 on atapci0 ata1: <ATA channel> at channel 1 on atapci0 pci0: <serial bus, SMBus> at device 31.3 (no driver attached) pcm0: <Intel ICH4 (82801DB)> port 0xe000-0xe0ff,0xec00-0xec3f mem 0xec281000-0xec2811ff,0xec282000-0xec2820ff irq 17 at device 31.5 on pci0 pcm0: primary codec not ready! pcm0: <VIA Technologies VIA1612A AC97 Codec> cpu0 on motherboard p4tcc0: <CPU Frequency Thermal Control> on cpu0 pmtimer0 on isa0 attimer0: <AT timer> at port 0x40-0x43 irq 0 pnpid PNP0100 on isa0 Timecounter "i8254" frequency 1193182 Hz quality 0 Event timer "i8254" frequency 1193182 Hz quality 100 atrtc0: <AT realtime clock> at port 0x70-0x71 irq 8 pnpid PNP0b00 on isa0 Event timer "RTC" frequency 32768 Hz quality 0 atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 irq 1 pnpid PNP0303 on isa0 atkbd0: <AT Keyboard> irq 1 on atkbdc0 kbd0 at atkbd0 atkbd0: [GIANT-LOCKED] unknown: <PNP0c01> can't assign resources (memory) uart0: <16550 or compatible> at port 0x3f8-0x3ff irq 4 flags 0x10 pnpid PNP0501 on isa0 sc0: <System console> at flags 0x100 on isa0 sc0: VGA <16 virtual consoles, flags=0x300> vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 ppc0: parallel port not found. unknown: <PNP0c01> can't assign resources (memory) (null) can't assign resources (port) Timecounters tick every 1.000 msec random: unblocking device. usbus0: 12Mbps Full Speed USB v1.0 usbus1: 12Mbps Full Speed USB v1.0 usbus2: 12Mbps Full Speed USB v1.0 usbus3: 480Mbps High Speed USB v2.0 ugen1.1: <Intel> at usbus1 uhub0: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus1 ugen0.1: <Intel> at usbus0 uhub1: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus0 ugen3.1: <Intel> at usbus3 uhub2: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus3 ugen2.1: <Intel> at usbus2 uhub3: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus2 ada0 at ata1 bus 0 scbus1 target 0 lun 0 ada0: <SSDSA2SH032G1GN INTEL 045C8621> ATA-7 SATA 2.x device ada0: Serial Number CVEM840200YV032HGN ada0: 100.000MB/s transfers (UDMA5, PIO 8192bytes) ada0: 30517MB (62500000 512 byte sectors: 16H 63S/T 16383C) ada0: Previously was known as ad2 Netvsc initializing... Timecounter "TSC" frequency 1499861315 Hz quality 800 Root mount waiting for: usbus3 usbus2 usbus1 usbus0 uhub0: 2 ports with 2 removable, self powered uhub1: 2 ports with 2 removable, self powered uhub3: 2 ports with 2 removable, self powered Root mount waiting for: usbus3 Root mount waiting for: usbus3 uhub2: 6 ports with 6 removable, self powered Trying to mount root from ufs:/dev/ada0p2 [rw,noatime]... ugen0.2: <American Power Conversion> at usbus0 [-- Attachment #3 --] hostb0@pci0:0:0:0: class=0x060000 card=0x35808086 chip=0x35808086 rev=0x02 hdr=0x00 bar [10] = type Prefetchable Memory, range 32, base 0xe8000000, size 67108864, enabled cap 09[40] = vendor (length 5) Intel cap 0 version 1 cap 02[a0] = AGP 4x 2x 1x SBA disabled none0@pci0:0:0:1: class=0x088000 card=0x35848086 chip=0x35848086 rev=0x02 hdr=0x00 none1@pci0:0:0:3: class=0x088000 card=0x35858086 chip=0x35858086 rev=0x02 hdr=0x00 pcib1@pci0:0:1:0: class=0x060400 card=0x00000000 chip=0x35818086 rev=0x02 hdr=0x01 vgapci0@pci0:0:2:0: class=0x030000 card=0x35828086 chip=0x35828086 rev=0x02 hdr=0x00 bar [10] = type Prefetchable Memory, range 32, base 0xe0000000, size 134217728, enabled bar [14] = type Memory, range 32, base 0xec200000, size 524288, enabled bar [18] = type I/O Port, range 32, base 0xe900, size 8, enabled cap 01[d0] = powerspec 1 supports D0 D1 D3 current D0 vgapci1@pci0:0:2:1: class=0x038000 card=0x35828086 chip=0x35828086 rev=0x02 hdr=0x00 bar [10] = type Prefetchable Memory, range 32, base 0, size 134217728, disabled bar [14] = type Memory, range 32, base 0, size 524288, disabled cap 01[d0] = powerspec 1 supports D0 D1 D3 current D0 uhci0@pci0:0:29:0: class=0x0c0300 card=0x24c28086 chip=0x24c28086 rev=0x02 hdr=0x00 bar [20] = type I/O Port, range 32, base 0xeb00, size 32, enabled uhci1@pci0:0:29:1: class=0x0c0300 card=0x24c28086 chip=0x24c48086 rev=0x02 hdr=0x00 bar [20] = type I/O Port, range 32, base 0xed00, size 32, enabled uhci2@pci0:0:29:2: class=0x0c0300 card=0x24c28086 chip=0x24c78086 rev=0x02 hdr=0x00 bar [20] = type I/O Port, range 32, base 0xe800, size 32, enabled ehci0@pci0:0:29:7: class=0x0c0320 card=0x24cd8086 chip=0x24cd8086 rev=0x02 hdr=0x00 bar [10] = type Memory, range 32, base 0xec280000, size 1024, enabled cap 01[50] = powerspec 2 supports D0 D3 current D0 pcib2@pci0:0:30:0: class=0x060400 card=0x00000000 chip=0x244e8086 rev=0x82 hdr=0x01 isab0@pci0:0:31:0: class=0x060100 card=0x00000000 chip=0x24c08086 rev=0x02 hdr=0x00 atapci0@pci0:0:31:1: class=0x01018a card=0x24c28086 chip=0x24cb8086 rev=0x02 hdr=0x00 bar [20] = type I/O Port, range 32, base 0xf000, size 16, enabled bar [24] = type Memory, range 32, base 0, size 1024, enabled none2@pci0:0:31:3: class=0x0c0500 card=0x24c28086 chip=0x24c38086 rev=0x02 hdr=0x00 bar [20] = type I/O Port, range 32, base 0x500, size 32, enabled pcm0@pci0:0:31:5: class=0x040100 card=0x41615649 chip=0x24c58086 rev=0x02 hdr=0x00 bar [10] = type I/O Port, range 32, base 0xe000, size 256, enabled bar [14] = type I/O Port, range 32, base 0xec00, size 64, enabled bar [18] = type Memory, range 32, base 0xec281000, size 512, enabled bar [1c] = type Memory, range 32, base 0xec282000, size 256, enabled cap 01[50] = powerspec 2 supports D0 D3 current D0 em0@pci0:2:0:0: class=0x020000 card=0x10768086 chip=0x10768086 rev=0x05 hdr=0x00 bar [10] = type Memory, range 32, base 0xec000000, size 131072, enabled bar [14] = type Memory, range 32, base 0xec020000, size 131072, enabled bar [18] = type I/O Port, range 32, base 0xd000, size 64, enabled cap 01[dc] = powerspec 2 supports D0 D3 current D0 cap 07[e4] = PCI-X supports 2048 burst read, 1 split transaction em1@pci0:2:1:0: class=0x020000 card=0x10768086 chip=0x10768086 rev=0x05 hdr=0x00 bar [10] = type Memory, range 32, base 0xec040000, size 131072, enabled bar [14] = type Memory, range 32, base 0xec060000, size 131072, enabled bar [18] = type I/O Port, range 32, base 0xd100, size 64, enabled cap 01[dc] = powerspec 2 supports D0 D3 current D0 cap 07[e4] = PCI-X supports 2048 burst read, 1 split transaction em2@pci0:2:2:0: class=0x020000 card=0x10768086 chip=0x10768086 rev=0x05 hdr=0x00 bar [10] = type Memory, range 32, base 0xec080000, size 131072, enabled bar [14] = type Memory, range 32, base 0xec0a0000, size 131072, enabled bar [18] = type I/O Port, range 32, base 0xd200, size 64, enabled cap 01[dc] = powerspec 2 supports D0 D3 current D0 cap 07[e4] = PCI-X supports 2048 burst read, 1 split transaction em3@pci0:2:3:0: class=0x020000 card=0x10768086 chip=0x10768086 rev=0x05 hdr=0x00 bar [10] = type Memory, range 32, base 0xec0c0000, size 131072, enabled bar [14] = type Memory, range 32, base 0xec0e0000, size 131072, enabled bar [18] = type I/O Port, range 32, base 0xd300, size 64, enabled cap 01[dc] = powerspec 2 supports D0 D3 current D0 cap 07[e4] = PCI-X supports 2048 burst read, 1 split transaction
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?530E3D85.8060906>