Date: Wed, 11 Jun 2008 22:07:29 -0700 From: Sean Bruno <sbruno@miralink.com> To: Hidetoshi Shimokawa <simokawa@FreeBSD.ORG> Cc: freebsd-firewire@freebsd.org Subject: Re: 400/800 card Message-ID: <4850AF11.4060702@miralink.com> In-Reply-To: <626eb4530806112112w4b3873c6n195385af3db909cc@mail.gmail.com> References: <485011B7.7060900@miralink.com> <626eb4530806112112w4b3873c6n195385af3db909cc@mail.gmail.com>
next in thread | previous in thread | raw e-mail | index | archive | help
Hidetoshi Shimokawa wrote: > On Wed, Jun 11, 2008 at 10:56 AM, Sean Bruno <sbruno@miralink.com> wrote: > >> I have a 400/800 card installed in my RELENG_7 box that has one 800 >> connector and two 400 connectors on it. Looking over the system, I wonder >> if the card is working correctly when I attach a S400 device to it: >> >> [sean@home-test ~]$ sudo fwcontrol -t >> crc_len: 3 generation:1 node_count:1 sid_count:1 >> id link gap_cnt speed delay cIRM power port0 port1 port2 ini more >> 00 1 63 S800 0 1 -1W - - - 1 0 >> > > The phy layer doesn't seem to recognize the S400 device. > It seem to be a hardware problem. > Are your cable and connector o.k.? > Did a bus reset occur when you attached the device? > The output of fwcontrol was generated with no attached device. I thought I would see a report of both the S400 and S800 capable ports in the output. Sean
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?4850AF11.4060702>