Date: Tue, 07 Nov 2000 07:50:10 +1100 From: Mark.Andrews@nominum.com To: stable@freebsd.org Subject: Re: 4.2-BETA + Dell Inspiron 3800 + 3CEX589ET Message-ID: <200011062050.eA6KoAv09481@drugs.dv.isc.org> In-Reply-To: Your message of "Tue, 07 Nov 2000 07:48:55 %2B1100."
next in thread | raw e-mail | index | archive | help
> > The above configuration locks up w/ GENERIC. I needed specify > a irq (10) to get the kernel to boot. If the 3CEX589ET is ^ for pcic0 > removed the system will boot. > > Mark > > Copyright (c) 1992-2000 The FreeBSD Project. > Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 > The Regents of the University of California. All rights reserved. > FreeBSD 4.2-BETA #0: Mon Nov 6 22:50:10 EST 2000 > root@drugs.dv.isc.org:/usr/obj/usr/src/sys/DRUGS > Timecounter "i8254" frequency 1193182 Hz > CPU: Pentium III/Pentium III Xeon/Celeron (498.47-MHz 686-class CPU) > Origin = "GenuineIntel" Id = 0x683 Stepping = 3 > Features=0x383f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV > ,PAT,PSE36,MMX,FXSR,SSE> > real memory = 134152192 (131008K bytes) > config> di sn0 > config> di lnc0 > config> di le0 > No such device: le0 > Invalid command or syntax. Type `?' for help. > config> di ie0 > config> di fe0 > config> di ed0 > config> di cs0 > config> q > avail memory = 126029824 (123076K bytes) > Preloaded elf kernel "kernel" at 0xc047e000. > Preloaded userconfig_script "/boot/kernel.conf" at 0xc047e09c. > Pentium Pro MTRR support enabled > md0: Malloc disk > apm0: <APM BIOS> on motherboard > apm: found APM BIOS v1.2, connected at v1.2 > npx0: <math processor> on motherboard > npx0: INT 16 interface > pcib0: <Intel 82443BX (440 BX) host to PCI bridge> on motherboard > pci0: <PCI bus> on pcib0 > pcib1: <Intel 82443BX (440 BX) PCI-PCI (AGP) bridge> at device 1.0 on pci0 > pci1: <PCI bus> on pcib1 > pci1: <ATI Mobility-1 graphics accelerator> at 0.0 irq 11 > pcic-pci0: <TI PCI-1225 PCI-CardBus Bridge> irq 11 at device 3.0 on pci0 > pcic-pci0: TI12XX PCI Config Reg: [ring enable][speaker enable][FUNC pci int > + CSC serial isa irq] > pcic-pci1: <TI PCI-1225 PCI-CardBus Bridge> irq 11 at device 3.1 on pci0 > pcic-pci1: TI12XX PCI Config Reg: [ring enable][speaker enable][FUNC pci int > + CSC serial isa irq] > isab0: <Intel 82371AB PCI to ISA bridge> at device 7.0 on pci0 > isa0: <ISA bus> on isab0 > atapci0: <Intel PIIX4 ATA33 controller> port 0x860-0x86f at device 7.1 on pci > 0 > ata0: at 0x1f0 irq 14 on atapci0 > ata1: at 0x170 irq 15 on atapci0 > uhci0: <Intel 82371AB/EB (PIIX4) USB controller> port 0xdce0-0xdcff irq 11 at > device 7.2 on pci0 > usb0: <Intel 82371AB/EB (PIIX4) USB controller> on uhci0 > usb0: USB revision 1.0 > uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 > uhub0: 2 ports with 2 removable, self powered > chip1: <Intel 82371AB Power management controller> port 0x840-0x84f at device > 7.3 on pci0 > pci0: <unknown card> (vendor=0x125d, dev=0x1998) at 8.0 irq 5 > pci0: <unknown card> (vendor=0x125d, dev=0x1999) at 8.1 irq 5 > fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0 > fdc0: FIFO enabled, 8 bytes threshold > fd0: <1440-KB 3.5" drive> on fdc0 drive 0 > atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0 > atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0 > kbd0 at atkbd0 > psm0: <PS/2 Mouse> irq 12 on atkbdc0 > psm0: model GlidePoint, device ID 0 > vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 > sc0: <System console> at flags 0x100 on isa0 > sc0: VGA <16 virtual consoles, flags=0x300> > pcic0: <VLSI 82C146> at port 0x3e0 iomem 0xd0000 irq 10 on isa0 > pcic0: management irq 10 > pccard0: <PC Card bus -- kludge version> on pcic0 > pccard1: <PC Card bus -- kludge version> on pcic0 > sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0 > sio0: type 16550A > ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0 > ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode > ppc0: FIFO with 16/16/8 bytes threshold > plip0: <PLIP network interface> on ppbus0 > lpt0: <Printer> on ppbus0 > lpt0: Interrupt-driven port > ppi0: <Parallel I/O> on ppbus0 > ad0: 11513MB <IBM-DARA-212000> [23392/16/63] at ata0-master UDMA33 > acd0: CDROM <TOSHIBA CD-ROM XM-7002B> at ata1-master using PIO4 > Mounting root from ufs:/dev/ad0s3a > pccard: card inserted, slot 1 > IP packet filtering initialized, divert enabled, rule-based forwarding disabl > ed, default to deny, unlimited logging > ep0: <3Com Etherlink III 3C589> at port 0x240-0x24f irq 3 slot 1 on pccard1 > ep0: Ethernet address 00:00:86:58:3f:e8 > ep0: detached > stray irq 3 > pccard: card disabled, slot 1 > resumed from suspended mode (slept 00:00:31) > pccard: card inserted, slot 1 > ata0: resetting devices .. done > ata1: resetting devices .. done > ep0: <3Com Etherlink III 3C589> at port 0x240-0x24f irq 3 slot 1 on pccard1 > ep0: Ethernet address 00:00:86:58:3f:e8 > pid 149 (named), uid 0: exited on signal 6 (core dumped) > ipfw: 800 Deny TCP 130.104.1.5:64436 130.155.191.236:113 in via ep0 > ipfw: 800 Deny TCP 130.104.1.5:64436 130.155.191.236:113 in via ep0 > ipfw: 800 Deny TCP 130.104.1.5:64436 130.155.191.236:113 in via ep0 > ipfw: 800 Deny TCP 130.104.1.5:64436 130.155.191.236:113 in via ep0 > -- > Mark Andrews, Nominum Inc. > 1 Seymour St., Dundas Valley, NSW 2117, Australia > PHONE: +61 2 9871 4742 INTERNET: Mark.Andrews@nominum > .com -- Mark Andrews, Nominum Inc. 1 Seymour St., Dundas Valley, NSW 2117, Australia PHONE: +61 2 9871 4742 INTERNET: Mark.Andrews@nominum.com To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-stable" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?200011062050.eA6KoAv09481>