Date: Sun, 03 Jun 2001 13:48:19 -0700 From: Alex Zepeda <jazepeda@pacbell.net> To: current@FreeBSD.ORG Subject: Re: Now that crash dumps are working, here's a trace Message-ID: <20010603134819.A890@zippy.mybox.zip> In-Reply-To: <20010603134452.A605@zippy.mybox.zip>; from jazepeda@pacbell.net on Sun, Jun 03, 2001 at 01:44:52PM -0700 References: <20010603134452.A605@zippy.mybox.zip>
next in thread | previous in thread | raw e-mail | index | archive | help
On Sun, Jun 03, 2001 at 01:44:52PM -0700, Alex Zepeda wrote:
> The system just hung, and eventually rebooted. I was in X at the time..
> anyways's here's the trace:
And of course the system info (wc is enabled):
Copyright (c) 1992-2001 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD 5.0-CURRENT #18: Sat Jun 2 18:33:49 PDT 2001
root@zippy.mybox.zip:/usr/src/sys/compile/ZIPPY_SMP
Timecounter "i8254" frequency 1193182 Hz
CPU: Pentium II/Pentium II Xeon/Celeron (451.03-MHz 686-class CPU)
Origin = "GenuineIntel" Id = 0x652 Stepping = 2
Features=0x183fbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR>
real memory = 134152192 (131008K bytes)
avail memory = 125358080 (122420K bytes)
Programming 24 pins in IOAPIC #0
IOAPIC #0 intpin 2 -> irq 0
FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs
cpu0 (BSP): apic id: 0, version: 0x00040011, at 0xfee00000
cpu1 (AP): apic id: 1, version: 0x00040011, at 0xfee00000
io0 (APIC): apic id: 2, version: 0x00170011, at 0xfec00000
Preloaded elf kernel "kernel" at 0xc04ff000.
Pentium Pro MTRR support enabled
Using $PIR table, 7 entries at 0xc00fdcf0
apm0: <APM BIOS> on motherboard
apm0: found APM BIOS v1.2, connected at v1.2
npx0: <math processor> on motherboard
npx0: INT 16 interface
pcib0: <Intel 82443BX (440 BX) host to PCI bridge> at pcibus 0 on motherboard
IOAPIC #0 intpin 19 -> irq 2
IOAPIC #0 intpin 17 -> irq 9
IOAPIC #0 intpin 18 -> irq 10
pci0: <PCI bus> on pcib0
pcib1: <PCI-PCI bridge> at device 1.0 on pci0
IOAPIC #0 intpin 16 -> irq 11
pci1: <PCI bus> on pcib1
pci1: <display, VGA> at 0.0 (no driver attached)
isab0: <PCI-ISA bridge> at device 7.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel PIIX4 ATA33 controller> port 0xf000-0xf00f at device 7.1 on pci0
ata0: at 0x1f0 irq 14 on atapci0
ata1: at 0x170 irq 15 on atapci0
uhci0: <Intel 82371AB/EB (PIIX4) USB controller> port 0xe000-0xe01f irq 2 at device 7.2 on pci0
usb0: <Intel 82371AB/EB (PIIX4) USB controller> on uhci0
usb0: USB revision 1.0
uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
intpm0: <Intel 82371AB Power management controller> port 0x5000-0x500f irq 9 at device 7.3 on pci0
intpm0: I/O mapped 5000
intpm0: intr IRQ 9 enabled revision 0
smbus0: <System Management Bus> on intsmb0
smb0: <SMBus general purpose I/O> on smbus0
intpm0: PM I/O mapped 4000
pci0: <display, VGA> at 9.0 (no driver attached)
fxp0: <Intel Pro/100 Ethernet> port 0xe400-0xe43f mem 0xdb000000-0xdb0fffff,0xdb100000-0xdb100fff irq 10 at device 10.0 on pci0
fxp0: Ethernet address 00:90:27:d1:83:6a
inphy0: <i82555 10/100 media interface> on miibus0
inphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
isa0: unexpected small tag 14
orm0: <Option ROM> at iomem 0xc0000-0xc87ff on isa0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: model MouseMan+, device ID 0
fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
sc0: <System console> on isa0
sc0: VGA <16 virtual consoles, flags=0x200>
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
sbc0: <Creative SB AWE64> at port 0x220-0x22f,0x330-0x331,0x388-0x38b irq 5 drq 1,5 on isa0
pcm0: <SB16 DSP 4.16> on sbc0
joy0: <Generic PnP Joystick> at port 0x200-0x207 on isa0
unknown: <PNP0303> can't assign resources
unknown: <PNP0f13> can't assign resources
sio0: <16550A-compatible COM port> at port 0x3f8-0x3ff irq 4 on isa0
sio0: type 16550A
unknown: <PNP0700> can't assign resources
ppc0: <ECP parallel printer port> at port 0x378-0x37f,0x778-0x77a irq 7 drq 3 on isa0
ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode
ppc0: FIFO with 16/16/16 bytes threshold
plip0: <PLIP network interface> on ppbus0
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
sio1: <16550A-compatible COM port> at port 0x2f8-0x2ff irq 3 on isa0
sio1: type 16550A
APIC_IO: Testing 8254 interrupt delivery
APIC_IO: routing 8254 via IOAPIC #0 intpin 2
IPv6 packet filtering initialized, logging disabled
IP packet filtering initialized, divert enabled, rule-based forwarding disabled, default to deny, logging disabled
IPsec: Initialized Security Association Processing.
ad0: 29314MB <IBM-DTLA-307030> [59560/16/63] at ata0-master tagged UDMA33
ad2: 12416MB <WDC AC313000R> [25228/16/63] at ata1-master UDMA33
acd0: CD-RW <R/RW 4x4x24> at ata1-slave PIO4
Mounting root from ufs:/dev/ad0s3a
WARNING: / was not properly dismounted
SMP: AP CPU #1 Launched!
lock order reversal
1st 0xc046d5c0 mntvnode @ ../../ufs/ffs/ffs_vfsops.c:478
2nd 0xc8b80b6c vnode interlock @ ../../kern/vfs_subr.c:1926
/var: mount pending error: blocks 10 files 2
/usr3: mount pending error: blocks 44 files 7
To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-current" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20010603134819.A890>