Date: Fri, 28 Jul 2000 22:45:17 +0200 From: Bernd Walter <ticso@cicely8.cicely.de> To: wilko@FreeBSD.ORG Cc: Andrew Gallatin <gallatin@cs.duke.edu>, mjacob@feral.com, "'FreeBSD Alpha mailing list'" <freebsd-alpha@FreeBSD.ORG> Subject: Re: fxp0 hangs my AXPpci33 Message-ID: <20000728224517.A38620@cicely8.cicely.de> In-Reply-To: <20000728172528.A6440@freebie.demon.nl>; from wkb@freebie.demon.nl on Fri, Jul 28, 2000 at 05:25:28PM %2B0200 References: <14721.35393.181226.803212@grasshopper.cs.duke.edu> <Pine.BSF.4.10.10007280637430.60544-100000@beppo.feral.com> <14721.38433.540697.393972@grasshopper.cs.duke.edu> <20000728172528.A6440@freebie.demon.nl>
next in thread | previous in thread | raw e-mail | index | archive | help
On Fri, Jul 28, 2000 at 05:25:28PM +0200, Wilko Bulte wrote:
> On Fri, Jul 28, 2000 at 10:20:15AM -0400, Andrew Gallatin wrote:
>
> > > if (bitmap & (1 << unit)) {
> > > m1 = PCIM_CMD_PORTEN;
> > > m2 = PCIM_CMD_MEMEN;
> > > }
> > > }
> > >
> > > stuff in isp_pci since newbus came in. Somebody should add the same to if_fxp
> > > (or some more general selector solution) and make this an alpha HARDWARE.TXT
> > > entry ("On AXPpci33/Multia, fxp needs to be set for mem_only mapping").
> > That's what I was planning to do..
>
> Is it really only on LCA based systems? I mean (as far as I understand the
> whole discussion..) it appears to be bridge-chip related. E.g. Miata also
> has bridge chips.
It is not that simple. As I wrote before I had a working AXPpci33 system with
such a card running.
I grabbed and still found old boot messages from that system.
Note: This is one using the bootflp GENERIC.
I even installed the system over that card via ftp from a local server.
Mar 20 23:43:00 install2 /kernel: Unrecognized boot flag '0'.
Mar 20 23:43:00 install2 /kernel: Copyright (c) 1992-2000 The FreeBSD Project.
Mar 20 23:43:00 install2 /kernel: Copyright (c) 1982, 1986, 1989, 1991, 1993
Mar 20 23:43:01 install2 /kernel: The Regents of the University of California. All rights reserved.
Mar 20 23:43:01 install2 /kernel: FreeBSD 4.0-CURRENT #0: Wed Mar 15 18:57:38 GMT 2000
Mar 20 23:43:01 install2 /kernel: jkh@beast.freebsd.org:/usr/src/sys/compile/GENERIC
Mar 20 23:43:01 install2 /kernel: DEC AXPpci
Mar 20 23:43:01 install2 /kernel: Alpha PC AXPpci33, 166MHz
Mar 20 23:43:01 install2 /kernel: 8192 byte page size, 1 processor.
Mar 20 23:43:01 install2 /kernel: CPU: LCA Family major=4 minor=2
Mar 20 23:43:01 install2 /kernel: OSF PAL rev: 0x100090002012d
Mar 20 23:43:01 install2 /kernel: real memory = 65036288 (63512K bytes)
Mar 20 23:43:01 install2 /kernel: avail memory = 58720256 (57344K bytes)
Mar 20 23:43:01 install2 /kernel: Preloaded elf kernel "kernel" at 0xfffffc00006bc000.
Mar 20 23:43:01 install2 /kernel: md0: Malloc disk
Mar 20 23:43:01 install2 /kernel: pci0: <PCI bus> on pcib0
Mar 20 23:43:01 install2 /kernel: ncr0: <ncr 53c810 fast10 scsi> port 0x10000-0x100ff mem 0x81201000-0x812010ff irq 11 at device 6.0 on pci0
Mar 20 23:43:01 install2 /kernel: ncr0: interrupting at ISA irq 11
Mar 20 23:43:01 install2 /kernel: ncr0: driver is using old-style compatability shims
Mar 20 23:43:01 install2 /kernel: isab0: <Intel 82378ZB PCI to ISA bridge> at device 7.0 on pci0
Mar 20 23:43:01 install2 /kernel: isa0: <ISA bus> on isab0
Mar 20 23:43:01 install2 /kernel: fxp0: <Intel EtherExpress Pro 10/100B Ethernet> port 0x10100-0x1013f mem 0x81100000-0x811fffff,0x81200000-0x81200fff irq 5 at device 11.0 on pci0
Mar 20 23:43:01 install2 /kernel: fxp0: interrupting at ISA irq 5
Mar 20 23:43:01 install2 /kernel: fxp0: Ethernet address 00:d0:b7:0a:b1:70
Mar 20 23:43:01 install2 /kernel: fxp0: supplying EUI64: 00:d0:b7:ff:fe:0a:b1:70
Mar 20 23:43:01 install2 /kernel: fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0
Mar 20 23:43:01 install2 /kernel: fdc0: interrupting at ISA irq 6
Mar 20 23:43:01 install2 /kernel: fdc0: FIFO enabled, 8 bytes threshold
Mar 20 23:43:01 install2 /kernel: fd0: <1440-KB 3.5" drive> on fdc0 drive 0
Mar 20 23:43:01 install2 /kernel: atkbdc0: <keyboard controller (i8042)> at port 0x60-0x6f on isa0
Mar 20 23:43:01 install2 /kernel: atkbd0: <AT Keyboard> irq 1 on atkbdc0
Mar 20 23:43:01 install2 /kernel: atkbd0: interrupting at ISA irq 1
Mar 20 23:43:01 install2 /kernel: vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
Mar 20 23:43:01 install2 /kernel: sc0: <System console> on isa0
Mar 20 23:43:01 install2 /kernel: sc0: VGA <16 virtual consoles, flags=0x200>
Mar 20 23:43:01 install2 /kernel: mcclock0: <MC146818A real time clock> at port 0x70-0x71 on isa0
Mar 20 23:43:01 install2 /kernel: sio0: configured irq 4 not in bitmap of probed irqs 0
Mar 20 23:43:01 install2 /kernel: sio0 at port 0x3f8-0x3ff irq 4 on isa0
Mar 20 23:43:01 install2 /kernel: sio0: type 16550A
Mar 20 23:43:01 install2 /kernel: sio0: interrupting at ISA irq 4
Mar 20 23:43:01 install2 /kernel: sio1: reserved for low-level i/o
Mar 20 23:43:01 install2 /kernel: Timecounter "alpha" frequency 166973346 Hz
Mar 20 23:43:01 install2 /kernel: Waiting 15 seconds for SCSI devices to settle
Mar 20 23:43:02 install2 /kernel: Mounting root from ufs:/dev/da0a
Mar 20 23:43:02 install2 /kernel: da0 at ncr0 bus 0 target 2 lun 0
Mar 20 23:43:02 install2 /kernel: da0: <IBM OEM DCHS04Z 5353> Fixed Direct Access SCSI-2 device
Mar 20 23:43:02 install2 /kernel: da0: 10.000MB/s transfers (10.000MHz, offset 8), Tagged Queueing Enabled
Mar 20 23:43:02 install2 /kernel: da0: 4340MB (8888543 512 byte sectors: 255H 63S/T 553C)
--
B.Walter COSMO-Project http://www.cosmo-project.de
ticso@cicely.de Usergroup info@cosmo-project.de
To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-alpha" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20000728224517.A38620>