Date: Thu, 7 Jun 2001 09:50:42 GMT From: Wilko Bulte <wkb@freebie.demon.nl> To: freebsd-alpha@freebsd.org Subject: 8 CPU SMP attempt Message-ID: <E157wR8-0007Fc-00@post.mail.nl.demon.net>
next in thread | raw e-mail | index | archive | help
[-- Attachment #1 --] Using a few days old -current and 5 minutes of spare time I booted our 8 CPU TurboLaser machine to see what happened. It gets quite far (IMO) but dies on me somewhere down the road. See attached console transcript [sorry, shitty webmailer here] W/ -- | / o / / _ Arnhem, The Netherlands email: wilko@freebsd.org |/|/ / / /( (_) Bulte http://www.freebsd.org http://www.nlfug.nl [-- Attachment #2 --] P00>>>boot dkc100 -fl; 4 (boot dkc100.1.0.7.0 -flags 4) SRM boot identifier: scsi 0 7 0 1 100 ef00 10201077 boot adapter: isp1 rev 5 in bus slot 7 off of kftha0 in TLSB slot 8 block 0 of dkc100.1.0.7.0 is a valid boot block reading 15 blocks from dkc100.1.0.7.0 ^C P00>>>^C P00>>>P00>>>boot dkc100 -fl 4[0K[23C v (boot dkc100.1.0.7.0 -flags v) SRM boot identifier: scsi 0 7 0 1 100 ef00 10201077 boot adapter: isp1 rev 5 in bus slot 7 off of kftha0 in TLSB slot 8 block 0 of dkc100.1.0.7.0 is a valid boot block reading 15 blocks from dkc100.1.0.7.0 bootstrap code read in Building FRU table....... FRU table size = 3865(14437) base = 200000, image_start = 0, image_bytes = 1e00 initializing HWRPB at 2000 initializing page table at 1f0000 initializing machine state setting affinity to the primary CPU jumping to bootstrap code VMS PAL rev: 0x10000100010115 OSF PAL rev: 0x10000100020117 Switch to OSF PAL code succeeded. FreeBSD/alpha SRM disk boot, Revision 1.1 (root@turbo.stolab, Tue Jun 5 19:53:04 CEST 2001) Memory: 262144 k Loading /boot/defaults/loader.conf Hit [Enter] to boot immediately, or any other key for command prompt. Booting [/boot/kernel/kernel] in 9 seconds... Booting [/boot/kernel/kernel] in 8 seconds... Booting [/boot/kernel/kernel]... Entering kernel at 0xfffffc0000337360... Copyright (c) 1992-2001 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD 5.0-CURRENT #0: Wed Jun 6 15:55:04 CEST 2001 root@turbo.stolab:/usr/src/sys/compile/GENERIC Setting atkbd 0 at to atkbdc (string) Setting atkbd 0 irq to 1 (int) Setting atkbdc 0 at to isa (string) Setting atkbdc 0 port to 96 (int) Setting fd 0 at to fdc0 (string) Setting fd 0 drive to 0 (int) Setting fdc 0 at to isa (string) Setting fdc 0 drq to 2 (int) Setting fdc 0 irq to 6 (int) Setting fdc 0 port to 1008 (int) Setting mcclock 0 at to isa (string) Setting mcclock 0 port to 112 (int) Setting ppc 0 at to isa (string) Setting ppc 0 irq to 7 (int) Setting psm 0 at to atkbdc (string) Setting psm 0 irq to 12 (int) Setting sc 0 at to isa (string) Setting sio 0 at to isa (string) Setting sio 0 irq to 4 (int) Setting sio 0 port to 1016 (int) Setting sio 1 at to isa (string) Setting sio 1 flags to 80 (int) Setting sio 1 irq to 3 (int) Setting sio 1 port to 760 (int) Setting vga 0 at to isa (string) AlphaServer 8400 AlphaServer 8400 5/625, 612MHz 8192 byte page size, 8 processors. CPU: EV56 (21164A) major=7 minor=2 extensions=0x1<BWX> OSF PAL rev: 0x10000100020117 real memory = 265650176 (259424K bytes) Physical memory chunk(s): 0x008f4000 - 0x0ff4ffff, 258326528 bytes (31534 pages) avail memory = 250863616 (244984K bytes) smp_start_secondary: starting cpu 1 smp_start_secondary: cpu 1 started smp_start_secondary: starting cpu 2 smp_start_secondary: cpu 2 started smp_start_secondary: starting cpu 3 smp_start_secondary: cpu 3 started smp_start_secondary: starting cpu 4 smp_start_secondary: cpu 4 started smp_start_secondary: starting cpu 5 smp_start_secondary: cpu 5 started smp_start_secondary: starting cpu 6 smp_start_secondary: cpu 6 started smp_start_secondary: starting cpu 7 smp_start_secondary: cpu 7 started FreeBSD/SMP: Multiprocessor System Detected: 8 CPUs Preloaded elf kernel "kernel" at 0xfffffc00008d4000. null: <null device, zero device> random: <entropy source> mem: <memory & I/O> tlsb0: <TurboLaser Backplane Bus> tlsbcpu0: <Dual CPU, 4MB cache> at tlsb0 node 0 gbus0 on tlsbcpu0 zsc0: <Z8530 uart> on gbus0 offset 0x10000000 zs0 on zsc0 channel A WARNING: Driver mistake: repeat make_dev("zs0") zs1 on zsc0 channel B WARNING: Driver mistake: repeat make_dev("zs0") mcclock0: <MC146818A real time clock> on gbus0 offset 0x20000000 No i8254- using firmware default of 612800000 Hz tlsbcpu1: <Dual CPU, 4MB cache> at tlsb0 node 0 tlsbcpu2: <Dual CPU, 4MB cache> at tlsb0 node 1 tlsbcpu3: <Dual CPU, 4MB cache> at tlsb0 node 1 tlsbcpu4: <Dual CPU, 4MB cache> at tlsb0 node 2 tlsbcpu5: <Dual CPU, 4MB cache> at tlsb0 node 2 tlsbcpu6: <Dual CPU, 4MB cache> at tlsb0 node 3 tlsbcpu7: <Dual CPU, 4MB cache> at tlsb0 node 3 tlsbmem0: <MS7CC Memory Module> at tlsb0 node 5 kft0: <KFTHA I/O interface> at tlsb0 node 8 pcib0: <DWLPA PCI adapter> on kft0 hose 0 pci0: physical bus=0 map[10]: type 4, range 32, base 07fffb00, size 8, enabled map[14]: type 1, range 32, base 07f9e000, size 12, enabled found-> vendor=0x1077, dev=0x1020, revid=0x05 bus=0, slot=3, func=0 class=01-00-00, hdrtype=0x00, mfdev=0 intpin=a, irq=12 map[10]: type 4, range 32, base 07fffc00, size 7, enabled map[14]: type 1, range 32, base 07f9dd00, size 7, enabled found-> vendor=0x1011, dev=0x0002, revid=0x23 bus=0, slot=5, func=0 class=02-00-00, hdrtype=0x00, mfdev=0 intpin=a, irq=20 map[10]: type 4, range 32, base 07fffd00, size 8, enabled map[14]: type 1, range 32, base 07f9de00, size 8, enabled found-> vendor=0x1000, dev=0x0001, revid=0x02 bus=0, slot=6, func=0 class=01-00-00, hdrtype=0x00, mfdev=0 intpin=a, irq=24 map[10]: type 4, range 32, base 07fffe00, size 8, enabled map[14]: type 1, range 32, base 07f9f000, size 12, enabled found-> vendor=0x1077, dev=0x1020, revid=0x05 bus=0, slot=7, func=0 class=01-00-00, hdrtype=0x00, mfdev=0 intpin=a, irq=28 map[10]: type 4, range 32, base 07ffff00, size 7, enabled map[14]: type 1, range 32, base 07f9df00, size 7, enabled found-> vendor=0x1011, dev=0x0009, revid=0x22 bus=0, slot=8, func=0 class=02-00-00, hdrtype=0x00, mfdev=0 intpin=a, irq=32 pci0: <PCI bus> on pcib0 Qlogic ISP Driver, FreeBSD Version 5.7, Core Version 2.1 isp0: <Qlogic ISP 1020/1040 PCI SCSI Adapter> port 0x7fffb00-0x7fffbff mem 0x7f9e000-0x7f9efff irq 12 at device 3.0 on pci0 isp0: using Memory space register mapping isp0: Node 8 Hose 0 Slot 3 interrupting at TLSB vector 0x8403 intpin 1 isp0: Differential Mode isp0: Ultra Mode Capable isp0: Board Revision 1040B, resident F/W Revision 5.57.1 isp0: Last F/W revision was 5.57.1 isp0: 256 max I/O commands supported isp0: Initiator ID is 7 on Channel 0 de0: <Digital 21040 Ethernet> port 0x7fffc00-0x7fffc7f mem 0x7f9dd00-0x7f9dd7f irq 20 at device 5.0 on pci0 de0: Node 8 Hose 0 Slot 5 interrupting at TLSB vector 0x8405 intpin 1 de0: DEC 21040 [10Mb/s] pass 2.3 de0: address 00:00:f8:20:3b:7b bpf: de0 attached sym0: <810> port 0x7fffd00-0x7fffdff mem 0x7f9de00-0x7f9deff irq 24 at device 6.0 on pci0 sym0: No NVRAM, ID 7, Fast-10, SE, parity checking sym0: open drain IRQ line driver sym0: using NCR-generic firmware. sym0: initial SCNTL3/DMODE/DCNTL/CTEST3/4/5 = (hex) 00/00/00/00/00/00 sym0: final SCNTL3/DMODE/DCNTL/CTEST3/4/5 = (hex) 03/c8/00/00/08/00 sym0: Delay (GEN=11): 234 msec, 37984 KHz sym0: Delay (GEN=11): 287 msec, 30969 KHz sym0: Delay (GEN=11): 288 msec, 30862 KHz sym0: Node 8 Hose 0 Slot 6 interrupting at TLSB vector 0x8406 intpin 1 isp1: <Qlogic ISP 1020/1040 PCI SCSI Adapter> port 0x7fffe00-0x7fffeff mem 0x7f9f000-0x7f9ffff irq 28 at device 7.0 on pci0 isp1: using Memory space register mapping isp1: Node 8 Hose 0 Slot 7 interrupting at TLSB vector 0x8407 intpin 1 isp1: Differential Mode isp1: Ultra Mode Capable isp1: Board Revision 1040B, resident F/W Revision 5.57.1 isp1: Last F/W revision was 5.57.1 isp1: 256 max I/O commands supported isp1: Initiator ID is 7 on Channel 0 de1: <Digital 21140A Fast Ethernet> port 0x7ffff00-0x7ffff7f mem 0x7f9df00-0x7f9df7f irq 32 at device 8.0 on pci0 de1: Node 8 Hose 0 Slot 8 interrupting at TLSB vector 0x8408 intpin 1 de1: DEC DE500-AA 21140A [10-100Mb/s] pass 2.2 de1: address 00:00:f8:1a:9a:68 de1: enabling 100baseTX port bpf: de1 attached pcib1: <DWLPA PCI adapter> on kft0 hose 1 pci1: physical bus=0 map[10]: type 4, range 32, base 07ffff00, size 8, enabled map[14]: type 1, range 32, base 07fef000, size 12, enabled found-> vendor=0x1077, dev=0x1020, revid=0x05 bus=0, slot=3, func=0 class=01-00-00, hdrtype=0x00, mfdev=0 intpin=a, irq=12 pci1: <PCI bus> on pcib1 isp2: <Qlogic ISP 1020/1040 PCI SCSI Adapter> port 0x7ffff00-0x7ffffff mem 0x7fef000-0x7feffff irq 12 at device 3.0 on pci1 isp2: using Memory space register mapping isp2: Node 8 Hose 1 Slot 3 interrupting at TLSB vector 0x8413 intpin 1 isp2: Differential Mode isp2: Ultra Mode Capable isp2: Board Revision 1040B, resident F/W Revision 5.57.1 isp2: Last F/W revision was 5.57.1 isp2: 256 max I/O commands supported isp2: Initiator ID is 7 on Channel 0 pcib2: <DWLPA PCI adapter> on kft0 hose 2 pci2: physical bus=0 map[10]: type 1, range 64, base 07eef000, size 12, enabled map[18]: type 4, range 32, base 07fff000, size 12, enabled map[1c]: type 1, range 64, base 07f00000, size 20, enabled found-> vendor=0x1011, dev=0x0008, revid=0x00 bus=0, slot=3, func=0 class=01-00-00, hdrtype=0x00, mfdev=0 intpin=a, irq=12 pci2: <PCI bus> on pcib2 pci2: <mass storage, SCSI> at 3.0 (no driver attached) pcib3: <DWLPA PCI adapter> on kft0 hose 3 pci3: physical bus=0 map[10]: type 1, range 64, base 07eef000, size 12, enabled map[18]: type 4, range 32, base 07fff000, size 12, enabled map[1c]: type 1, range 64, base 07f00000, size 20, enabled found-> vendor=0x1011, dev=0x0008, revid=0x00 bus=0, slot=3, func=0 class=01-00-00, hdrtype=0x00, mfdev=0 intpin=a, irq=12 pci3: <PCI bus> on pcib3 pci3: <mass storage, SCSI> at 3.0 (no driver attached) fatal kernel trap: trap entry = 0x2 (memory management fault) cpuid = 0 faulting va = 0x78 type = access violation cause = load instructon pc = 0xfffffc0000491ae4 ra = 0xfffffc0000491ba8 sp = 0xfffffc00008d9b90 usp = 0x0 curproc = 0xfffffc0000831288 pid = 0, comm = swapper Stopped at sync_other_counter+0x24: ldq s1,0x78(s0) <0x78> <s1=0xfffffc0000785138,s0=0x0> db>
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?E157wR8-0007Fc-00>