Date: Fri, 14 Mar 2014 22:15:13 -0400 From: Dan Langille <dan@langille.org> To: freebsd-stable@freebsd.org Subject: Re: sa0 devices disappear after power cycling tape library Message-ID: <0EA8C46E-9903-4602-8F82-2BB9BA1180A6@langille.org>
next in thread | raw e-mail | index | archive | help
[-- Attachment #1 --] > > On Mar 14, 2014, at 8:14 PM, Dan Langille <dan@langille.org> wrote: > >=20 > > I have a tape library which acts up from time to time and I power cycle it= > . > >=20 > > After running camcontrol devlist rescan, some of the devices are missing > >=20 > > This what I see in dev after power cycling the FreeBSD 9.2 server: > >=20 > > $ ls *sa* > > lrwxr-xr-x 1 root wheel 6 Mar 8 02:12 esa0 -> esa0.0 > > crw-rw---- 1 root operator 0x70 Mar 8 02:12 esa0.0 > > crw-rw---- 1 root operator 0x76 Mar 8 02:12 esa0.1 > > crw-rw---- 1 root operator 0x79 Mar 8 02:12 esa0.2 > > crw-rw---- 1 root operator 0x7c Mar 8 02:12 esa0.3 > > crw-rw---- 1 root operator 0x75 Mar 8 02:12 nsa0.1 > > crw-rw---- 1 root operator 0x78 Mar 8 02:12 nsa0.2 > > crw-rw---- 1 root operator 0x7b Mar 8 02:12 nsa0.3 > > crw-rw---- 1 root operator 0x74 Mar 8 02:12 sa0.1 > > crw-rw---- 1 root operator 0x77 Mar 8 02:12 sa0.2 > > crw-rw---- 1 root operator 0x7a Mar 8 02:12 sa0.3 > >=20 > > This is what I see after rebooting the FreeBSD server: > >=20 > > $ ls -l *sa* > > lrwxr-xr-x 1 root wheel 6 Mar 15 00:09 esa0 -> esa0.0 > > crw-rw---- 1 root operator 0x70 Mar 15 00:09 esa0.0 > > crw-rw---- 1 root operator 0x76 Mar 15 00:09 esa0.1 > > crw-rw---- 1 root operator 0x79 Mar 15 00:09 esa0.2 > > crw-rw---- 1 root operator 0x7c Mar 15 00:09 esa0.3 > > lrwxr-xr-x 1 root wheel 6 Mar 15 00:09 nsa0 -> nsa0.0 > > crw-rw---- 1 root operator 0x6f Mar 15 00:09 nsa0.0 > > crw-rw---- 1 root operator 0x75 Mar 15 00:09 nsa0.1 > > crw-rw---- 1 root operator 0x78 Mar 15 00:09 nsa0.2 > > crw-rw---- 1 root operator 0x7b Mar 15 00:09 nsa0.3 > > lrwxr-xr-x 1 root wheel 5 Mar 15 00:09 sa0 -> sa0.0 > > crw-rw---- 1 root operator 0x6e Mar 15 00:09 sa0.0 > > crw-rw---- 1 root operator 0x74 Mar 15 00:09 sa0.1 > > crw-rw---- 1 root operator 0x77 Mar 15 00:09 sa0.2 > > crw-rw---- 1 root operator 0x7a Mar 15 00:09 sa0.3 > > crw-rw---- 1 root operator 0x6d Mar 15 00:09 sa0.ctl > >=20 > > Should I just do some ln -s? Something easier, I=E2=80=99m sure=E2=80=A6.= > > >=20 > > > Have you tried a camcontrol rescan ? Yes, that’s what I meant by 'camcontrol devlist rescan’ above… I ran: camcontrol rescan all. The output above is after that command. > Also what does camcontrol devlist -v s= > how before and after the reboot ?=20 I don’t have before, but after is: $ sudo camcontrol devlistol devlist Password: <ATA TOSHIBA DT01ACA3 ABB0> at scbus0 target 2 lun 0 (pass0,da0) <ATA TOSHIBA DT01ACA3 ABB0> at scbus0 target 10 lun 0 (pass1,da1) <ATA TOSHIBA DT01ACA3 ABB0> at scbus0 target 11 lun 0 (pass2,da2) <ATA TOSHIBA DT01ACA3 ABB0> at scbus0 target 12 lun 0 (pass3,da3) <ATA TOSHIBA DT01ACA3 ABB0> at scbus0 target 13 lun 0 (pass4,da4) <ATA TOSHIBA DT01ACA3 ABB0> at scbus0 target 14 lun 0 (pass5,da5) <ATA TOSHIBA DT01ACA3 ABB0> at scbus0 target 16 lun 0 (pass6,da6) <ATA TOSHIBA DT01ACA3 ABB0> at scbus0 target 17 lun 0 (pass7,da7) <TOSHIBA DT01ACA300 MX6OABB0> at scbus5 target 0 lun 0 (ada0,pass8) <TOSHIBA DT01ACA300 MX6OABB0> at scbus5 target 1 lun 0 (ada1,pass9) <QUANTUM DLT8000 0250> at scbus7 target 4 lun 0 (sa0,pass10) <OVERLAND LXB 0524> at scbus7 target 6 lun 0 (pass11,ch0) IIRC, before I ran the command, the last two entries were missing. -- Dan Langille - http://langille.org [-- Attachment #2 --] -----BEGIN PGP SIGNATURE----- Comment: GPGTools - http://gpgtools.org iEYEARECAAYFAlMjt7gACgkQCgsXFM/7nTxl1wCg4zev16fO+SbR3fOHgD1If8Q3 9aUAnRJnk/y59OJcm6lFAPH+MsYpzIK5 =WzUk -----END PGP SIGNATURE-----
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?0EA8C46E-9903-4602-8F82-2BB9BA1180A6>