Date: Mon, 19 Feb 2001 08:06:47 -0500 From: "Person, Roderick" <personrp@ccbh.com> To: 'Bernd Walter' <ticso@cicely5.cicely.de> Cc: "'''freebsd-alpha@FreeBSD.ORG' ' '" <freebsd-alpha@FreeBSD.ORG> Subject: RE: this isn't fun any more.... Message-ID: <ABC15E2D8FBCD311B4A200805FA7D59B026041FC@1upmc-msx6.isdip.upmc.edu>
index | next in thread | raw e-mail
[-- Attachment #1 --]
when I start cu (cu -l/dev/cuaa0 -c5551212) it respondes no such device.
and stays in the shell. AS you say, i did mention device errors, becuase up
until I tried cu, there where no such error. Even though cu reports that
there is no device when I try it the modems clear to send light comes on.
But, the modem does seem to respond back to the pc.
Roderick P. Person
Programmer II
personrp@ccbh.com
"To hell with the public! I'm here to represent the people!"
- A New Jersey state senator
> -----Original Message-----
> From: Bernd Walter [mailto:ticso@cicely5.cicely.de]
> Sent: February 19, 2001 12:30 AM
> To: Person, Roderick
> Cc: '''freebsd-alpha@FreeBSD.ORG' ' '
> Subject: Re: this isn't fun any more....
>
>
> On Sun, Feb 18, 2001 at 09:06:27PM -0500, Person, Roderick wrote:
> > i tried to use cu and a get no such device errors, it
> doesn't matter if i
> > use cuaa0 or cuaa1. So i did MAKEDEV cuaa0, MAKEDEV cuaa1.
> the makedev
> > returned no errors I even made cuaa3 and cuaa4 to see if
> they would error no
> > such luck. so apparently the modem is not responding back.
> so i don't know
> > where to go from here.
>
> I don't know what you mean with "get no such device errors".
> As far as I can remember you never mentioned "device errors".
> Do you get an echo from your modem when you type atz using cu?
> If yes - do get an connection when you try atd<number>?
>
> > the modem is a us robotics 33.6 external, i have tried
> various setting on
> > the dip switch but np luck. any hints from anyone.
> >
> > -----Original Message-----
> > From: Bernd Walter
> > To: Person, Roderick
> > Cc: ''freebsd-alpha@FreeBSD.ORG' '
> > Sent: 2/18/01 2:16 PM
> > Subject: Re: this isn't fun any more....
> >
> > On Sun, Feb 18, 2001 at 01:36:36PM -0500, Person, Roderick wrote:
> > > ok,
> > >
> > > i've recompiled the kernel. com 2 is now accessiable through the
> > serial
> > > port, but still my external modem gets no dial tone. The
> modem works,
> > i used
> > > it on my wife's pentium pro this morning. the phone line
> is good, i
> > have a
> > > laptop connect to it now to write this email.
> > >
> > > I'm using 4.1 release on a noname axppci.
> > >
> > > the only error I recieve are:
> > > ppp[189]: tun0: Warning: Chat script failed
> > > dmesg | grep 'sio'
> > >
> > > tells me that
> > > sio0 configured irq4 not in bitmap of probed irqs 0
> > >
> > > Is that a problem.
> > >
> > > Also, does sound work in the alpha kernel, i used device pcm as in
> > i386
> > > kernel but the makedevs fail. It seems to me that all the
> > documentation is
> > > i386 based...is there somewhere i can go to find alpha
> specific info.
> > >
> >
> > If a terminal programm (cu and tip are in the base system) receives
> > the echo from the modem the comunication to the modem works.
> > With your description of the problem no one can say if the
> comunication
> > to the modem failed or your chat script is wrong or your modem
> > isn't plugged in or maybe your phone provider failt or ...
> >
> > Please use a terminalprogram and try the seriel connection
> to the modem
> > first before trying any complex things like starting chat scripts.
> >
> > --
> > B.Walter COSMO-Project
> http://www.cosmo-project.de
> > ticso@cicely.de Usergroup info@cosmo-project.de
>
> --
> B.Walter COSMO-Project
> http://www.cosmo-project.de
> ticso@cicely.de Usergroup info@cosmo-project.de
>
[-- Attachment #2 --]
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 3.2//EN">
<HTML>
<HEAD>
<META HTTP-EQUIV="Content-Type" CONTENT="text/html; charset=iso-8859-1">
<META NAME="Generator" CONTENT="MS Exchange Server version 5.5.2650.12">
<TITLE>RE: this isn't fun any more....</TITLE>
</HEAD>
<BODY>
<P><FONT SIZE=2>when I start cu (cu -l/dev/cuaa0 -c5551212) it respondes no such device.</FONT>
<BR><FONT SIZE=2>and stays in the shell. AS you say, i did mention device errors, becuase up until I tried cu, there where no such error. Even though cu reports that there is no device when I try it the modems clear to send light comes on. But, the modem does seem to respond back to the pc.</FONT></P>
<P><FONT SIZE=2>Roderick P. Person</FONT>
<BR><FONT SIZE=2>Programmer II</FONT>
<BR><FONT SIZE=2>personrp@ccbh.com</FONT>
</P>
<BR>
<P><FONT SIZE=2>"To hell with the public! I'm here to represent the people!" </FONT>
</P>
<P><FONT SIZE=2> - A New Jersey state senator </FONT>
</P>
<BR>
<BR>
<P><FONT SIZE=2>> -----Original Message-----</FONT>
<BR><FONT SIZE=2>> From: Bernd Walter [<A HREF="mailto:ticso@cicely5.cicely.de">mailto:ticso@cicely5.cicely.de</A>]</FONT>
<BR><FONT SIZE=2>> Sent: February 19, 2001 12:30 AM</FONT>
<BR><FONT SIZE=2>> To: Person, Roderick</FONT>
<BR><FONT SIZE=2>> Cc: '''freebsd-alpha@FreeBSD.ORG' ' '</FONT>
<BR><FONT SIZE=2>> Subject: Re: this isn't fun any more....</FONT>
<BR><FONT SIZE=2>> </FONT>
<BR><FONT SIZE=2>> </FONT>
<BR><FONT SIZE=2>> On Sun, Feb 18, 2001 at 09:06:27PM -0500, Person, Roderick wrote:</FONT>
<BR><FONT SIZE=2>> > i tried to use cu and a get no such device errors, it </FONT>
<BR><FONT SIZE=2>> doesn't matter if i</FONT>
<BR><FONT SIZE=2>> > use cuaa0 or cuaa1. So i did MAKEDEV cuaa0, MAKEDEV cuaa1. </FONT>
<BR><FONT SIZE=2>> the makedev</FONT>
<BR><FONT SIZE=2>> > returned no errors I even made cuaa3 and cuaa4 to see if </FONT>
<BR><FONT SIZE=2>> they would error no</FONT>
<BR><FONT SIZE=2>> > such luck. so apparently the modem is not responding back. </FONT>
<BR><FONT SIZE=2>> so i don't know</FONT>
<BR><FONT SIZE=2>> > where to go from here. </FONT>
<BR><FONT SIZE=2>> </FONT>
<BR><FONT SIZE=2>> I don't know what you mean with "get no such device errors".</FONT>
<BR><FONT SIZE=2>> As far as I can remember you never mentioned "device errors".</FONT>
<BR><FONT SIZE=2>> Do you get an echo from your modem when you type atz using cu?</FONT>
<BR><FONT SIZE=2>> If yes - do get an connection when you try atd<number>?</FONT>
<BR><FONT SIZE=2>> </FONT>
<BR><FONT SIZE=2>> > the modem is a us robotics 33.6 external, i have tried </FONT>
<BR><FONT SIZE=2>> various setting on</FONT>
<BR><FONT SIZE=2>> > the dip switch but np luck. any hints from anyone.</FONT>
<BR><FONT SIZE=2>> > </FONT>
<BR><FONT SIZE=2>> > -----Original Message-----</FONT>
<BR><FONT SIZE=2>> > From: Bernd Walter</FONT>
<BR><FONT SIZE=2>> > To: Person, Roderick</FONT>
<BR><FONT SIZE=2>> > Cc: ''freebsd-alpha@FreeBSD.ORG' '</FONT>
<BR><FONT SIZE=2>> > Sent: 2/18/01 2:16 PM</FONT>
<BR><FONT SIZE=2>> > Subject: Re: this isn't fun any more....</FONT>
<BR><FONT SIZE=2>> > </FONT>
<BR><FONT SIZE=2>> > On Sun, Feb 18, 2001 at 01:36:36PM -0500, Person, Roderick wrote:</FONT>
<BR><FONT SIZE=2>> > > ok,</FONT>
<BR><FONT SIZE=2>> > > </FONT>
<BR><FONT SIZE=2>> > > i've recompiled the kernel. com 2 is now accessiable through the</FONT>
<BR><FONT SIZE=2>> > serial</FONT>
<BR><FONT SIZE=2>> > > port, but still my external modem gets no dial tone. The </FONT>
<BR><FONT SIZE=2>> modem works,</FONT>
<BR><FONT SIZE=2>> > i used</FONT>
<BR><FONT SIZE=2>> > > it on my wife's pentium pro this morning. the phone line </FONT>
<BR><FONT SIZE=2>> is good, i</FONT>
<BR><FONT SIZE=2>> > have a</FONT>
<BR><FONT SIZE=2>> > > laptop connect to it now to write this email.</FONT>
<BR><FONT SIZE=2>> > > </FONT>
<BR><FONT SIZE=2>> > > I'm using 4.1 release on a noname axppci.</FONT>
<BR><FONT SIZE=2>> > > </FONT>
<BR><FONT SIZE=2>> > > the only error I recieve are:</FONT>
<BR><FONT SIZE=2>> > > ppp[189]: tun0: Warning: Chat script failed</FONT>
<BR><FONT SIZE=2>> > > dmesg | grep 'sio'</FONT>
<BR><FONT SIZE=2>> > > </FONT>
<BR><FONT SIZE=2>> > > tells me that</FONT>
<BR><FONT SIZE=2>> > > sio0 configured irq4 not in bitmap of probed irqs 0</FONT>
<BR><FONT SIZE=2>> > > </FONT>
<BR><FONT SIZE=2>> > > Is that a problem.</FONT>
<BR><FONT SIZE=2>> > > </FONT>
<BR><FONT SIZE=2>> > > Also, does sound work in the alpha kernel, i used device pcm as in</FONT>
<BR><FONT SIZE=2>> > i386</FONT>
<BR><FONT SIZE=2>> > > kernel but the makedevs fail. It seems to me that all the</FONT>
<BR><FONT SIZE=2>> > documentation is</FONT>
<BR><FONT SIZE=2>> > > i386 based...is there somewhere i can go to find alpha </FONT>
<BR><FONT SIZE=2>> specific info.</FONT>
<BR><FONT SIZE=2>> > > </FONT>
<BR><FONT SIZE=2>> > </FONT>
<BR><FONT SIZE=2>> > If a terminal programm (cu and tip are in the base system) receives</FONT>
<BR><FONT SIZE=2>> > the echo from the modem the comunication to the modem works.</FONT>
<BR><FONT SIZE=2>> > With your description of the problem no one can say if the </FONT>
<BR><FONT SIZE=2>> comunication</FONT>
<BR><FONT SIZE=2>> > to the modem failed or your chat script is wrong or your modem</FONT>
<BR><FONT SIZE=2>> > isn't plugged in or maybe your phone provider failt or ...</FONT>
<BR><FONT SIZE=2>> > </FONT>
<BR><FONT SIZE=2>> > Please use a terminalprogram and try the seriel connection </FONT>
<BR><FONT SIZE=2>> to the modem</FONT>
<BR><FONT SIZE=2>> > first before trying any complex things like starting chat scripts.</FONT>
<BR><FONT SIZE=2>> > </FONT>
<BR><FONT SIZE=2>> > -- </FONT>
<BR><FONT SIZE=2>> > B.Walter COSMO-Project </FONT>
<BR><FONT SIZE=2>> <A HREF="http://www.cosmo-project.de" TARGET="_blank">http://www.cosmo-project.de</A></FONT>;
<BR><FONT SIZE=2>> > ticso@cicely.de Usergroup info@cosmo-project.de</FONT>
<BR><FONT SIZE=2>> </FONT>
<BR><FONT SIZE=2>> -- </FONT>
<BR><FONT SIZE=2>> B.Walter COSMO-Project </FONT>
<BR><FONT SIZE=2>> <A HREF="http://www.cosmo-project.de" TARGET="_blank">http://www.cosmo-project.de</A></FONT>;
<BR><FONT SIZE=2>> ticso@cicely.de Usergroup info@cosmo-project.de</FONT>
<BR><FONT SIZE=2>> </FONT>
</P>
</BODY>
</HTML>
help
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?ABC15E2D8FBCD311B4A200805FA7D59B026041FC>