Date: Wed, 16 Apr 2014 05:10:21 +0300 From: "Sulev-Madis Silber (ketas)" <madis555@hot.ee> To: freebsd-arm <freebsd-arm@FreeBSD.org> Subject: BBB boot is flaky lately Message-ID: <534DE68D.3020906@hot.ee>
next in thread | raw e-mail | index | archive | help
Hello. I have many issues booting my BBB lately. Currently using r264282 Not only I get weird eMMC detection issues (1/4/8bit bus) and even failed boots (when device is not found at all): random boot #1: ------------------------------------------------------------- mmcsd0: 2GB <MMC MMC02G 3.10 SN 706010460 MFG 11/2012 by 254 0x004e> at mmc0 48.0MHz/8bit/65535-block ------------------------------------------------------------- random boot #2: ------------------------------------------------------------- mmcsd0: 2GB <MMC MMC02G 3.10 SN 706010460 MFG 11/2012 by 254 0x004e> at mmc0 48.0MHz/1bit/65535-block ------------------------------------------------------------- random boot #3: ------------------------------------------------------------- mmcsd0: 2GB <MMC MMC02G 3.10 SN 706010460 MFG 11/2012 by 254 0x004e> at mmc0 48.0MHz/4bit/65535-block ------------------------------------------------------------- Now, I managed to get this (once): ------------------------------------------------------------- cpsw0: <3-port Switch Ethernet Subsystem> mem 0x4a100000-0x4a103fff irq 40,41,42,43 on simplebus0 cpsw0: CPSW SS Version 1.12 (0) cpsw0: Initial queue size TX=128 RX=384 cpsw0: Ethernet address: c8:a0:30:ad:93:a8 cpsw0: Failed to read from PHY. cpsw0: attaching PHYs failed vm_fault(0xc08b0c50, 0, 1, 0) -> 1 Fatal kernel mode data abort: 'Translation Fault (S)' trapframe: 0xc0996af0 FSR=00000005, FAR=00000018, spsr=80000193 r0 =c288d280, r1 =00000000, r2 =00000019, r3 =60000193 r4 =00000000, r5 =c288d280, r6 =00000006, r7 =c04d7964 r8 =c288d280, r9 =c28e828c, r10=c28e60c8, r11=c0996b50 r12=00000000, ssp=c0996b40, slr=c04f8af4, pc =c0344164 panic: Fatal abort Uptime: 1s Automatic reboot in 15 seconds - press a key on the console to abort Rebooting... ------------------------------------------------------------- After reboot, problem persists, needs HW reset to successfully boot up. Any ideas? Thanks.
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?534DE68D.3020906>