Date: Wed, 2 Oct 2002 16:01:35 -0400 (EDT) From: Charles Sprickman <spork@inch.com> To: stable@freebsd.org Subject: SMP problems w/4.6.2p2 Message-ID: <Pine.BSF.4.44.0210021524360.14438-400000@shell.inch.com>
index | next in thread | raw e-mail
[-- Attachment #1 --]
Hello,
We're seeing SMP looking a bit broken on an Intel SRM2K server. I've
tried tracking down what exactly the model of the mainboard is, but so far
no luck; it's not mentioned in the manual and the support folks don't seem
to have this info.
That said, the problem manifests itself like so:
-UP kernel, no problems, everything functions normally
-SMP kernel with keyboard plugged in, everything functions normally
-SMP kernel with no keyboard plugged in machine hangs at the following
point in the boot process:
sio0: configured irq 4 not in bitmap of probed irqs 0
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 16550A, console
sio1: configured irq 3 not in bitmap of probed irqs 0
ppc0: parallel port not found.
APIC_IO: Testing 8254 interrupt delivery
And at that point it just hangs.
On a successful smp boot, the following is shown after the APIC_IO line:
APIC_IO: Broken MP table detected: 8254 is not connected to IOAPIC #0
intpin 2
APIC_IO: routing 8254 via 8259 and IOAPIC #0 intpin 0
I see this same message on another dual PIII board, and nothing is acting
odd there (it's a supermicro board).
I am attaching a dmesg from a boot attempt where it hangs, a dmesg from a
SMP boot with keyboard plugged in, and an UP boot. Both kernel configs
are the same except for the following SMP options:
> options SMP # Symmetric MultiProcessor Kernel
> options APIC_IO # Symmetric (APIC) I/O
We've tried every console configuration on boot; bios redirected to serial
console, fbsd boot directed to serial console, and all permutations of the
above.
The server has dual PIII-1GHz processors, built-in ahc controller
(disabled in bios), adaptec raid card (asr), two 10/100 intel chips (fxp),
and 2GB PC133 DIMMS. Chipset is ServerWorks (see dmesg).
If there's any other information I can provide, or if there's a more
appropriate list for smp issues, please let me know.
Thanks,
Charles
--
Charles Sprickman
spork@inch.com
[-- Attachment #2 --]
Copyright (c) 1992-2002 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD 4.6.2-RELEASE-p2 #0: Fri Sep 13 22:51:16 EDT 2002
spork@toolbox:/var/obj/usr/src/sys/PIII-XEON-single
Timecounter "i8254" frequency 1193182 Hz
Timecounter "TSC" frequency 997462018 Hz
CPU: Pentium III/Pentium III Xeon/Celeron (997.46-MHz 686-class CPU)
Origin = "GenuineIntel" Id = 0x68a Stepping = 10
Features=0x387fbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,PN,MMX,FXSR,SSE>
real memory = 2147287040 (2096960K bytes)
avail memory = 2087329792 (2038408K bytes)
Preloaded elf kernel "kernel" at 0xc03c5000.
Pentium Pro MTRR support enabled
md0: Malloc disk
Using $PIR table, 10 entries at 0xc00f3080
npx0: <math processor> on motherboard
npx0: INT 16 interface
pcib0: <ServerWorks NB6635 3.0LE host to PCI bridge> on motherboard
pci0: <PCI bus> on pcib0
pci0: <ATI Mach64-GR graphics accelerator> at 4.0 irq 11
fxp0: <Intel Pro 10/100B/100+ Ethernet> port 0xc400-0xc43f mem 0xfe800000-0xfe8fffff,0xfe9fe000-0xfe9fefff irq 9 at device 7.0 on pci0
fxp0: Ethernet address 00:03:47:68:a1:58
inphy0: <i82555 10/100 media interface> on miibus0
inphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
fxp1: <Intel Pro 10/100B/100+ Ethernet> port 0xc000-0xc03f mem 0xfe600000-0xfe6fffff,0xfe9fd000-0xfe9fdfff irq 10 at device 8.0 on pci0
fxp1: Ethernet address 00:03:47:68:a1:59
inphy1: <i82555 10/100 media interface> on miibus1
inphy1: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
isab0: <ServerWorks IB6566 PCI to ISA bridge> at device 15.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <ServerWorks ROSB4 ATA33 controller> port 0xffa0-0xffaf at device 15.1 on pci0
ata0: at 0x1f0 irq 14 on atapci0
ata1: at 0x170 irq 15 on atapci0
ohci0: <OHCI (generic) USB controller> mem 0xfe9fc000-0xfe9fcfff irq 10 at device 15.2 on pci0
usb0: OHCI version 1.0, legacy support
usb0: SMM does not respond, resetting
usb0: <OHCI (generic) USB controller> on ohci0
usb0: USB revision 1.0
uhub0: (unknown) OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
pcib1: <ServerWorks NB6635 3.0LE host to PCI bridge> on motherboard
pci1: <PCI bus> on pcib1
asr0: <Adaptec Caching SCSI RAID> mem 0xfa000000-0xfbffffff irq 5 at device 2.0 on pci1
asr0: major=154
asr0: ADAPTEC 2110S FW Rev. 380E, 1 channel, 256 CCBs, Protocol I2O
pcib2: <PCI to PCI bridge (vendor=1044 device=a500)> at device 2.1 on pci1
pci2: <PCI bus> on pcib2
ahc0: <Adaptec aic7899 Ultra160 SCSI adapter> irq 0 at device 4.0 on pci1
ahc0: can't allocate register resources
device_probe_and_attach: ahc0 attach returned 12
ahc0: <Adaptec aic7899 Ultra160 SCSI adapter> irq 0 at device 4.1 on pci1
ahc0: can't allocate register resources
device_probe_and_attach: ahc0 attach returned 12
orm0: <Option ROMs> at iomem 0xc0000-0xc7fff,0xc8000-0xcdfff,0xce000-0xcf7ff,0xd9000-0xdcfff on isa0
fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <8 virtual consoles, flags=0x300>
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 16550A
sio1: configured irq 3 not in bitmap of probed irqs 0
ppc0: parallel port not found.
IP packet filtering initialized, divert disabled, rule-based forwarding enabled, default to accept, logging limited to 100 packets/entry by default
IPsec: Initialized Security Association Processing.
pass1 at asr0 bus 0 target 6 lun 0
pass1: <ESG-SHV SCA HSBP M14 0.01> Fixed Processor SCSI-2 device
da0 at asr0 bus 0 target 0 lun 0
da0: <ADAPTEC RAID-1 380E> Fixed Direct Access SCSI-2 device
da0: Tagged Queueing Enabled
da0: 17501MB (35843584 512 byte sectors: 255H 63S/T 2231C)
Mounting root from ufs:/dev/da0s1a
[-- Attachment #3 --]
BIOS 636kB/2095936kB available memory
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD 4.6.2-RELEASE-p2 #3: Tue Oct 1 17:51:22 EDT 2002
spork@toolbox:/var/obj/usr/src/sys/PIII-XEON-dual
Timecounter "i8254" frequency 1193182 Hz
CPU: Pentium III/Pentium III Xeon/Celeron (997.46-MHz 686-class CPU)
Origin = "GenuineIntel" Id = 0x68a Stepping = 10
Features=0x387fbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,C>
real memory = 2147287040 (2096960K bytes)
avail memory = 2087628800 (2038700K bytes)
Programming 16 pins in IOAPIC #0
IOAPIC #0 intpin 2 -> irq 0
Programming 16 pins in IOAPIC #1
FreeBSD/SMP: Multiprocessor motherboard
cpu0 (BSP): apic id: 0, version: 0x00040011, at 0xfee00000
cpu1 (AP): apic id: 1, version: 0x00040011, at 0xfee00000
io0 (APIC): apic id: 4, version: 0x000f0011, at 0xfec00000
io1 (APIC): apic id: 5, version: 0x000f0011, at 0xfec01000
Preloaded elf kernel "kernel" at 0xc03d9000.
Pentium Pro MTRR support enabled
md0: Malloc disk
Using $PIR table, 10 entries at 0xc00f3080
npx0: <math processor> on motherboard
npx0: INT 16 interface
pcib0: <ServerWorks NB6635 3.0LE host to PCI bridge> on motherboard
IOAPIC #1 intpin 7 -> irq 2
IOAPIC #1 intpin 1 -> irq 5
IOAPIC #1 intpin 0 -> irq 9
pci0: <PCI bus> on pcib0
pci0: <ATI Mach64-GR graphics accelerator> at 4.0 irq 2
fxp0: <Intel Pro 10/100B/100+ Ethernet> port 0xc400-0xc43f mem 0xfe800000-0xfe80
fxp0: Ethernet address 00:03:47:68:a1:58
inphy0: <i82555 10/100 media interface> on miibus0
inphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
fxp1: <Intel Pro 10/100B/100+ Ethernet> port 0xc000-0xc03f mem 0xfe600000-0xfe60
fxp1: Ethernet address 00:03:47:68:a1:59
inphy1: <i82555 10/100 media interface> on miibus1
inphy1: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
isab0: <ServerWorks IB6566 PCI to ISA bridge> at device 15.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <ServerWorks ROSB4 ATA33 controller> port 0xffa0-0xffaf at device 15.10
ata0: at 0x1f0 irq 14 on atapci0
ata1: at 0x170 irq 15 on atapci0
ohci0: <OHCI (generic) USB controller> mem 0xfe9fc000-0xfe9fcfff irq 10 at devi0
usb0: OHCI version 1.0, legacy support
SMuPsb 0:P SCMPM do1es not respond, resetting
usb0: <OHCI (generic) USB controller> on ohci0
usb0: USB revision 1.0
uhub0: (unknown) OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
pcib1: <ServerWorks NB6635 3.0LE host to PCI bridge> on motherboard
IOAPIC #1 intpin 10 -> irq 11
pci1: <PCI bus> on pcib1
asr0: <Adaptec Caching SCSI RAID> mem 0xfa000000-0xfbffffff irq 11 at device 2.1
asr0: major=154
pcib2: <PCI to PCI bridge (vendor=1044 device=a500)> at device 2.1 on pci1
pci2: <PCI bus> on pcib2
ahc0: <Adaptec aic7899 Ultra160 SCSI adapter> irq 0 at device 4.0 on pci1
ahc0: can't allocate register resources
device_probe_and_attach: ahc0 attach returned 12
ahc0: <Adaptec aic7899 Ultra160 SCSI adapter> irq 0 at device 4.1 on pci1
ahc0: can't allocate register resources
device_probe_and_attach: ahc0 attach returned 12
orm0: <Option ROMs> at iomem 0xc0000-0xc7fff,0xc8000-0xcdfff,0xce000-0xcf7ff,0x0
fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <8 virtual consoles, flags=0x100>
sio0: configured irq 4 not in bitmap of probed irqs 0
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 16550A, console
sio1: configured irq 3 not in bitmap of probed irqs 0
ppc0: parallel port not found.
APIC_IO: Testing 8254 interrupt delivery
[-- Attachment #4 --]
Copyright (c) 1992-2002 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD 4.6.2-RELEASE-p2 #3: Tue Oct 1 17:51:22 EDT 2002
spork@toolbox:/var/obj/usr/src/sys/PIII-XEON-dual
Timecounter "i8254" frequency 1193182 Hz
CPU: Pentium III/Pentium III Xeon/Celeron (997.46-MHz 686-class CPU)
Origin = "GenuineIntel" Id = 0x68a Stepping = 10
Features=0x387fbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,PN,MMX,FXSR,SSE>
real memory = 2147287040 (2096960K bytes)
avail memory = 2087628800 (2038700K bytes)
Programming 16 pins in IOAPIC #0
IOAPIC #0 intpin 2 -> irq 0
Programming 16 pins in IOAPIC #1
FreeBSD/SMP: Multiprocessor motherboard
cpu0 (BSP): apic id: 0, version: 0x00040011, at 0xfee00000
cpu1 (AP): apic id: 1, version: 0x00040011, at 0xfee00000
io0 (APIC): apic id: 4, version: 0x000f0011, at 0xfec00000
io1 (APIC): apic id: 5, version: 0x000f0011, at 0xfec01000
Preloaded elf kernel "kernel" at 0xc03d9000.
Pentium Pro MTRR support enabled
md0: Malloc disk
Using $PIR table, 10 entries at 0xc00f3080
npx0: <math processor> on motherboard
npx0: INT 16 interface
pcib0: <ServerWorks NB6635 3.0LE host to PCI bridge> on motherboard
IOAPIC #1 intpin 7 -> irq 2
IOAPIC #1 intpin 1 -> irq 5
IOAPIC #1 intpin 0 -> irq 9
pci0: <PCI bus> on pcib0
pci0: <ATI Mach64-GR graphics accelerator> at 4.0 irq 2
fxp0: <Intel Pro 10/100B/100+ Ethernet> port 0xc400-0xc43f mem 0xfe800000-0xfe8fffff,0xfe9fe000-0xfe9fefff irq 5 at device 7.0 on pci0
fxp0: Ethernet address 00:03:47:68:a1:58
inphy0: <i82555 10/100 media interface> on miibus0
inphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
fxp1: <Intel Pro 10/100B/100+ Ethernet> port 0xc000-0xc03f mem 0xfe600000-0xfe6fffff,0xfe9fd000-0xfe9fdfff irq 9 at device 8.0 on pci0
fxp1: Ethernet address 00:03:47:68:a1:59
inphy1: <i82555 10/100 media interface> on miibus1
inphy1: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
isab0: <ServerWorks IB6566 PCI to ISA bridge> at device 15.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <ServerWorks ROSB4 ATA33 controller> port 0xffa0-0xffaf at device 15.1 on pci0
ata0: at 0x1f0 irq 14 on atapci0
ata1: at 0x170 irq 15 on atapci0
ohci0: <OHCI (generic) USB controller> mem 0xfe9fc000-0xfe9fcfff irq 10 at device 15.2 on pci0
usb0: OHCI version 1.0, legacy support
usb0: SMM does not respond, resetting
usb0: <OHCI (generic) USB controller> on ohci0
usb0: USB revision 1.0
uhub0: (unknown) OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
pcib1: <ServerWorks NB6635 3.0LE host to PCI bridge> on motherboard
IOAPIC #1 intpin 10 -> irq 11
pci1: <PCI bus> on pcib1
asr0: <Adaptec Caching SCSI RAID> mem 0xfa000000-0xfbffffff irq 11 at device 2.0 on pci1
asr0: major=154
asr0: ADAPTEC 2110S FW Rev. 380E, 1 channel, 256 CCBs, Protocol I2O
pcib2: <PCI to PCI bridge (vendor=1044 device=a500)> at device 2.1 on pci1
pci2: <PCI bus> on pcib2
ahc0: <Adaptec aic7899 Ultra160 SCSI adapter> irq 0 at device 4.0 on pci1
ahc0: can't allocate register resources
device_probe_and_attach: ahc0 attach returned 12
ahc0: <Adaptec aic7899 Ultra160 SCSI adapter> irq 0 at device 4.1 on pci1
ahc0: can't allocate register resources
device_probe_and_attach: ahc0 attach returned 12
orm0: <Option ROMs> at iomem 0xc0000-0xc7fff,0xc8000-0xcdfff,0xce000-0xcf7ff,0xd9000-0xdcfff on isa0
fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <8 virtual consoles, flags=0x100>
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 16550A, console
sio1: configured irq 3 not in bitmap of probed irqs 0
ppc0: parallel port not found.
APIC_IO: Testing 8254 interrupt delivery
APIC_IO: Broken MP table detected: 8254 is not connected to IOAPIC #0 intpin 2
APIC_IO: routing 8254 via 8259 and IOAPIC #0 intpin 0
IP packet filtering initialized, divert disabled, rule-based forwarding enabled, default to accept, logging limited to 100 packets/entry by default
IPsec: Initialized Security Association Processing.
SMP: AP CPU #1 Launched!
pass1 at asr0 bus 0 target 6 lun 0
pass1: <ESG-SHV SCA HSBP M14 0.01> Fixed Processor SCSI-2 device
da0 at asr0 bus 0 target 0 lun 0
da0: <ADAPTEC RAID-1 380E> Fixed Direct Access SCSI-2 device
da0: Tagged Queueing Enabled
da0: 17501MB (35843584 512 byte sectors: 255H 63S/T 2231C)
Mounting root from ufs:/dev/da0s1a
help
Want to link to this message? Use this
URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?Pine.BSF.4.44.0210021524360.14438-400000>