Date: Sat, 27 Oct 2001 12:56:27 +1300 From: Richard B Mahoney <RBM49@student.canterbury.ac.nz> To: Paulo Fragoso <paulo@nlink.com.br> Cc: Subscribers to freebsd-hardware <freebsd-hardware@FreeBSD.ORG> Subject: Re: ASUS or MBR problem? Message-ID: <20011027125627.A307@it.canterbury.ac.nz> In-Reply-To: <"from paulo"@nlink.com.br> References: <20011026195644.A21665-100000@mirage.nlink.com.br>
next in thread | previous in thread | raw e-mail | index | archive | help
--IS0zKkzwUGydFO0o Content-Type: text/plain; charset=us-ascii Content-Disposition: inline Content-Transfer-Encoding: quoted-printable Dear Paulo, On Fri, Oct 26, 2001 at 08:10:35PM -0200, Paulo Fragoso wrote: > I've got two ASUS motherboard (A7VE and CUV4X) which I can't boot FreeBSD > 4.x using IDE HD's with 3 partitions!!! I'm using an Asus CUV4X-E without any issues. Here is the output from /var/log/messages: ************************************************************ Oct 27 10:20:54 rbm49 /kernel: Copyright (c) 1992-2001 The FreeBSD Project. Oct 27 10:20:54 rbm49 /kernel: Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993,1994 Oct 27 10:20:54 rbm49 /kernel: The Regents of the University of California. All rights reserved. Oct 27 10:20:54 rbm49 /kernel: FreeBSD 4.3-RELEASE #0: Wed Oct 3 23:10:02 NZST 2001 Oct 27 10:20:54 rbm49 /kernel: root@rbm49.tacacs.canterbury.ac.nz:/usr/src/sys/compile/MUGGINS Oct 27 10:20:54 rbm49 /kernel: Timecounter "i8254" frequency 1193182 Hz Oct 27 10:20:54 rbm49 /kernel: CPU: Pentium III/Pentium III Xeon/Celeron (999.73-MHz 686-class CPU) Oct 27 10:20:54 rbm49 /kernel: Origin =3D "GenuineIntel" Id =3D 0x686 Stepping =3D 6 Oct 27 10:20:54 rbm49 /kernel: Features=3D0x383f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,M CA,CMOV,PAT,PSE36,MMX,FXSR,SSE> Oct 27 10:20:54 rbm49 /kernel: real memory =3D 268353536 (262064K bytes) Oct 27 10:20:54 rbm49 /kernel: config> di sn0 Oct 27 10:20:54 rbm49 /kernel: No such device: sn0 Oct 27 10:20:54 rbm49 /kernel: Invalid command or syntax. Type `?' for help. Oct 27 10:20:54 rbm49 /kernel: config> di lnc0 Oct 27 10:20:54 rbm49 /kernel: No such device: lnc0 =20 Oct 27 10:20:54 rbm49 /kernel: Invalid command or syntax. Type `?' for help. Oct 27 10:20:54 rbm49 /kernel: config> di ie0 Oct 27 10:20:54 rbm49 /kernel: No such device: ie0 Oct 27 10:20:54 rbm49 /kernel: Invalid command or syntax. Type `?' for help. Oct 27 10:20:54 rbm49 /kernel: config> di fe0 Oct 27 10:20:54 rbm49 /kernel: No such device: fe0 Oct 27 10:20:54 rbm49 /kernel: Invalid command or syntax. Type `?' for help. Oct 27 10:20:54 rbm49 /kernel: config> di ed0 Oct 27 10:20:54 rbm49 /kernel: No such device: ed0 Oct 27 10:20:54 rbm49 /kernel: Invalid command or syntax. Type `?' for help. Oct 27 10:20:54 rbm49 /kernel: config> di cs0 Oct 27 10:20:54 rbm49 /kernel: No such device: cs0 Oct 27 10:20:54 rbm49 /kernel: Invalid command or syntax. Type `?' for help. Oct 27 10:20:54 rbm49 /kernel: config> di bt0 Oct 27 10:20:54 rbm49 /kernel: config> di aic0 Oct 27 10:20:54 rbm49 /kernel: config> di aha0 Oct 27 10:20:54 rbm49 /kernel: config> di adv0 Oct 27 10:20:54 rbm49 /kernel: config> q Oct 27 10:20:54 rbm49 /kernel: avail memory =3D 257609728 (251572K bytes) Oct 27 10:20:54 rbm49 /kernel: Preloaded elf kernel "kernel" at 0xc0393000. Oct 27 10:20:55 rbm49 /kernel: Preloaded userconfig_script "/boot/kernel.conf" at 0xc039309c. Oct 27 10:20:55 rbm49 /kernel: Preloaded elf module "agp.ko" at 0xc03930ec. Oct 27 10:20:55 rbm49 /kernel: Pentium Pro MTRR support enabled Oct 27 10:20:55 rbm49 /kernel: md0: Malloc disk Oct 27 10:20:55 rbm49 /kernel: npx0: <math processor> on motherboard Oct 27 10:20:55 rbm49 /kernel: npx0: INT 16 interface Oct 27 10:20:55 rbm49 /kernel: pcib0: <Host to PCI bridge> on motherboard Oct 27 10:20:55 rbm49 /kernel: pci0: <PCI bus> on pcib0 =20 Oct 27 10:20:55 rbm49 /kernel: agp0: <VIA 82C691 (Apollo Pro) host to PCI bridge> mem 0xf8000000-0xfbffffff at device 0.0 on pci0 Oct 27 10:20:55 rbm49 /kernel: pcib2: <VIA 82C598MVP (Apollo MVP3) PCI-PCI (AGP) bridge> at device1.0 on pci0 Oct 27 10:20:55 rbm49 /kernel: pci1: <PCI bus> on pcib2 Oct 27 10:20:55 rbm49 /kernel: pci1: <NVidia GeForce2 GTS graphics accelerator> at 0.0 irq 5 Oct 27 10:20:55 rbm49 /kernel: isab0: <VIA 82C686 PCI-ISA bridge> at device 4.0 on pci0 Oct 27 10:20:55 rbm49 /kernel: isa0: <ISA bus> on isab0 Oct 27 10:20:55 rbm49 /kernel: atapci0: <VIA 82C686 ATA100 controller> port 0xd800-0xd80f at device 4.1 on pci0 Oct 27 10:20:55 rbm49 /kernel: ata0: at 0x1f0 irq 14 on atapci0 Oct 27 10:20:55 rbm49 /kernel: ata1: at 0x170 irq 15 on atapci0 Oct 27 10:20:55 rbm49 /kernel: uhci0: <VIA 83C572 USB controller> port 0xd400-0xd41f irq 11 at device 4.2 on pci0 Oct 27 10:20:55 rbm49 /kernel: usb0: <VIA 83C572 USB controller> on uhci0 Oct 27 10:20:55 rbm49 /kernel: usb0: USB revision 1.0 Oct 27 10:20:55 rbm49 /kernel: uhub0: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 Oct 27 10:20:55 rbm49 /kernel: uhub0: 2 ports with 2 removable, self powered Oct 27 10:20:55 rbm49 /kernel: uhci1: <VIA 83C572 USB controller> port 0xd000-0xd01f irq 11 at device 4.3 on pci0 Oct 27 10:20:55 rbm49 /kernel: usb1: <VIA 83C572 USB controller> on uhci1 Oct 27 10:20:55 rbm49 /kernel: usb1: USB revision 1.0 Oct 27 10:20:55 rbm49 /kernel: uhub1: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 Oct 27 10:20:55 rbm49 /kernel: uhub1: 2 ports with 2 removable, self powered Oct 27 10:20:55 rbm49 /kernel: dc0: <Macronix 98715/98715A 10/100BaseTX> at device 9.0 on pci0 Oct 27 10:20:55 rbm49 /kernel: dc0: couldn't map ports/memory Oct 27 10:20:55 rbm49 /kernel: device_probe_and_attach: dc0 attach returned 6 Oct 27 10:20:55 rbm49 /kernel: pci0: <unknown card> (vendor=3D0x14f1, dev=3D0x1035) at 10.0 =20 Oct 27 10:20:55 rbm49 /kernel: pcib1: <Host to PCI bridge> on motherboard Oct 27 10:20:55 rbm49 /kernel: pci2: <PCI bus> on pcib1 Oct 27 10:20:55 rbm49 /kernel: fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0 Oct 27 10:20:55 rbm49 /kernel: fdc0: FIFO enabled, 8 bytes threshold Oct 27 10:20:55 rbm49 /kernel: fd0: <1440-KB 3.5" drive> on fdc0 drive 0 Oct 27 10:20:55 rbm49 /kernel: atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0 Oct 27 10:20:55 rbm49 /kernel: atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0 Oct 27 10:20:55 rbm49 /kernel: kbd0 at atkbd0 Oct 27 10:20:55 rbm49 /kernel: psm0: <PS/2 Mouse> irq 12 on atkbdc0 Oct 27 10:20:55 rbm49 /kernel: psm0: model Generic PS/2 mouse, device ID 0 Oct 27 10:20:55 rbm49 /kernel: vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 Oct 27 10:20:55 rbm49 /kernel: sc0: <System console> at flags 0x100 on isa0 Oct 27 10:20:55 rbm49 /kernel: sc0: VGA <16 virtual consoles, flags=3D0x300> Oct 27 10:20:55 rbm49 /kernel: sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0 Oct 27 10:20:56 rbm49 /kernel: sio0: type 16550A Oct 27 10:20:56 rbm49 /kernel: sio1 at port 0x2f8-0x2ff irq 3 on isa0 Oct 27 10:20:56 rbm49 /kernel: sio1: type 16550A Oct 27 10:20:56 rbm49 /kernel: ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0 Oct 27 10:20:56 rbm49 /kernel: ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode Oct 27 10:20:56 rbm49 /kernel: ppc0: FIFO with 16/16/8 bytes threshold Oct 27 10:20:56 rbm49 /kernel: ppi0: <Parallel I/O> on ppbus0 Oct 27 10:20:56 rbm49 /kernel: plip0: <PLIP network interface> on ppbus0 Oct 27 10:20:56 rbm49 /kernel: lpt0: <Printer> on ppbus0 Oct 27 10:20:56 rbm49 /kernel: lpt0: Interrupt-driven port =20 Oct 27 10:20:56 rbm49 /kernel: ad0: 29319MB <FUJITSU MPG3307AT> [59570/16/63] at ata0-master UDMA100 Oct 27 10:20:56 rbm49 /kernel: acd0: CD-RW <CRW1232> at ata1-master using PIO4 Oct 27 10:20:56 rbm49 /kernel: ata1-slave: <IOMEGA ZIP 250 ATAPI Floppy/51.G> floppy device - NO DRIVER! Oct 27 10:20:56 rbm49 /kernel: Mounting root from ufs:/dev/ad0s2a Oct 27 10:20:56 rbm49 lpd[164]: lpd startup: logging=3D0 **************************************************************** Hope this helps, Richard Mahoney=20 --=20 +----------------------- Richard Mahoney -----------------------+ | 78 Jeffreys Rd +64-3-351-5831 | | Christchurch New Zealand | +--------------[mailto:rbm49@it.canterbury.ac.nz]---------------+ --IS0zKkzwUGydFO0o Content-Type: application/pgp-signature Content-Disposition: inline -----BEGIN PGP SIGNATURE----- Version: PGPfreeware 5.0i for non-commercial use MessageID: doDQUDkFNQJ6MD2KiJDhZn+pvKR2dGsY iQA/AwUBO9n4Kla60siGOGUrEQIMOwCgsirBiTIFfcY5x4qEJl0G5eTVyhYAn3/t hjrYYLfZFr4BwqwX8kfDWtj2 =WEpC -----END PGP SIGNATURE----- --IS0zKkzwUGydFO0o-- To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-hardware" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20011027125627.A307>