Date: Wed, 15 Jun 2011 17:20:58 -0700 From: Jack Vogel <jfvogel@gmail.com> To: Joshua Boyd <boydjd@jbip.net> Cc: freebsd-stable <freebsd-stable@freebsd.org>, "Vogel, Jack" <jack.vogel@intel.com>, Jeremy Chadwick <freebsd@jdc.parodius.com> Subject: Re: em0 watchdog timeouts on 8-STABLE Message-ID: <BANLkTininFrihBXvsKwAnheqE%2B%2BXoyhCVg@mail.gmail.com> In-Reply-To: <BANLkTim_Y30cXNtvOGg_%2Bj4devU5VtiMxA@mail.gmail.com> References: <BANLkTinoyV61RzkB8HbHe=AY8zsBov4JXg@mail.gmail.com> <20110615075754.GA54879@icarus.home.lan> <BANLkTim_Y30cXNtvOGg_%2Bj4devU5VtiMxA@mail.gmail.com>
next in thread | previous in thread | raw e-mail | index | archive | help
I have hardware now, am working on reproducing this. Just curious, do you have the em driver defined in the kernel, or as a module? Jack On Wed, Jun 15, 2011 at 2:09 AM, Joshua Boyd <boydjd@jbip.net> wrote: > On Wed, Jun 15, 2011 at 3:57 AM, Jeremy Chadwick > <freebsd@jdc.parodius.com>wrote: > > > On Wed, Jun 15, 2011 at 03:14:43AM -0400, Joshua Boyd wrote: > > > I recently updated my server to the latest 8-STABLE, and upgraded to > v28 > > > ZFS. I have not had these problems on any other version of 8-STABLE or > > > 7-STABLE, which this box was upgraded from some time ago. > > > > > > Now, during my weekly scrub, I get the following messages and em0 is > > > unresponsive: > > > > > > Jun 12 03:07:58 foghornleghorn kernel: em0: Watchdog timeout -- > resetting > > > Jun 12 03:07:58 foghornleghorn kernel: em0: link state changed to DOWN > > > Jun 12 03:08:01 foghornleghorn kernel: em0: link state changed to UP > > > Jun 12 03:08:47 foghornleghorn kernel: em0: Watchdog timeout -- > resetting > > > Jun 12 03:08:47 foghornleghorn kernel: em0: link state changed to DOWN > > > Jun 12 03:08:50 foghornleghorn kernel: em0: link state changed to UP > > > > > > My scrub is scheduled to start at 03:00:00, so it looks like watchdog > > > timeouts start occurring pretty quickly once I/O ramps up. > > > > > > Here's some possibly relevant information, let me know if anything else > > > would be helpful to troubleshoot. > > > > > > FreeBSD foghornleghorn.res.openband.net 8.2-STABLE FreeBSD 8.2-STABLE > > #17: > > > Mon Jun 6 19:40:19 EDT 2011 > > > root@foghornleghorn.res.openband.net: > /usr/obj/usr/src/sys/FOGHORNLEGHORN > > > amd64 > > > > > > em0: <Intel(R) PRO/1000 Legacy Network Connection 1.0.3> port > > 0xe800-0xe83f > > > mem 0xfebe0000-0xfebfffff,0xfebc0000-0xfebdffff irq 20 at device 5.0 on > > pci7 > > > > > > em0@pci0:7:5:0: class=0x020000 card=0x13768086 chip=0x107c8086 > rev=0x05 > > > hdr=0x00 > > > vendor = 'Intel Corporation' > > > device = 'Gigabit Ethernet Controller (Copper) rev 5 (82541PI)' > > > class = network > > > subclass = ethernet > > > > > > And, the SAS cards: > > > > > > dev.mpt.0.%desc: LSILogic SAS/SATA Adapter > > > dev.mpt.0.%driver: mpt > > > dev.mpt.0.%location: slot=0 function=0 > > > dev.mpt.0.%pnpinfo: vendor=0x1000 device=0x0058 subvendor=0x15d9 > > > subdevice=0xa580 class=0x010000 > > > dev.mpt.0.%parent: pci1 > > > dev.mpt.0.debug: 3 > > > dev.mpt.0.role: 1 > > > dev.mpt.1.%desc: LSILogic SAS/SATA Adapter > > > dev.mpt.1.%driver: mpt > > > dev.mpt.1.%location: slot=0 function=0 > > > dev.mpt.1.%pnpinfo: vendor=0x1000 device=0x0058 subvendor=0x15d9 > > > subdevice=0xa580 class=0x010000 > > > dev.mpt.1.%parent: pci2 > > > dev.mpt.1.debug: 3 > > > dev.mpt.1.role: 1 > > > dev.mpt.2.%desc: LSILogic SAS/SATA Adapter > > > dev.mpt.2.%driver: mpt > > > dev.mpt.2.%location: slot=0 function=0 > > > dev.mpt.2.%pnpinfo: vendor=0x1000 device=0x0058 subvendor=0x1000 > > > subdevice=0x30a0 class=0x010000 > > > dev.mpt.2.%parent: pci6 > > > dev.mpt.2.debug: 3 > > > dev.mpt.2.role: 1 > > > > Please provide output from the following commands (as root): > > > > # pciconf -lvcb > > > > hostb0@pci0:0:0:0: class=0x060000 card=0x59561002 chip=0x59561002 rev=0x00 > hdr=0x00 > vendor = 'ATI Technologies Inc. / Advanced Micro Devices, Inc.' > device = 'RD790 GFX Dual Slot' > class = bridge > subclass = HOST-PCI > pcib1@pci0:0:2:0: class=0x060400 card=0x59561002 chip=0x59781002 rev=0x00 > hdr=0x01 > vendor = 'ATI Technologies Inc. / Advanced Micro Devices, Inc.' > device = 'RD790 PCI to PCI bridge (external gfx0 port A)' > class = bridge > subclass = PCI-PCI > pcib2@pci0:0:3:0: class=0x060400 card=0x59561002 chip=0x59791002 rev=0x00 > hdr=0x01 > vendor = 'ATI Technologies Inc. / Advanced Micro Devices, Inc.' > device = 'RD790 PCI to PCI bridge (external gfx0 port B)' > class = bridge > subclass = PCI-PCI > pcib3@pci0:0:4:0: class=0x060400 card=0x59561002 chip=0x597a1002 rev=0x00 > hdr=0x01 > vendor = 'ATI Technologies Inc. / Advanced Micro Devices, Inc.' > device = 'RD790 PCI to PCI bridge (PCIe gpp port A)' > class = bridge > subclass = PCI-PCI > pcib4@pci0:0:6:0: class=0x060400 card=0x59561002 chip=0x597c1002 rev=0x00 > hdr=0x01 > vendor = 'ATI Technologies Inc. / Advanced Micro Devices, Inc.' > device = 'RD790 PCI to PCI bridge (PCIe gpp port C)' > class = bridge > subclass = PCI-PCI > pcib5@pci0:0:7:0: class=0x060400 card=0x59561002 chip=0x597d1002 rev=0x00 > hdr=0x01 > vendor = 'ATI Technologies Inc. / Advanced Micro Devices, Inc.' > device = 'RD790 PCI to PCI bridge (PCIe gpp port D)' > class = bridge > subclass = PCI-PCI > pcib6@pci0:0:11:0: class=0x060400 card=0x59561002 chip=0x59801002 rev=0x00 > hdr=0x01 > vendor = 'ATI Technologies Inc. / Advanced Micro Devices, Inc.' > device = 'RD790 PCI to PCI bridge (external gfx1 port A)' > class = bridge > subclass = PCI-PCI > atapci4@pci0:0:18:0: class=0x01018f card=0x81ef1043 chip=0x43801002 > rev=0x00 > hdr=0x00 > vendor = 'ATI Technologies Inc. / Advanced Micro Devices, Inc.' > device = 'IXP SB600 Serial ATA Controller' > class = mass storage > subclass = ATA > ohci0@pci0:0:19:0: class=0x0c0310 card=0x82881043 chip=0x43871002 rev=0x00 > hdr=0x00 > vendor = 'ATI Technologies Inc. / Advanced Micro Devices, Inc.' > device = 'IXP SB600 USB Controller (OHCI0)' > class = serial bus > subclass = USB > ohci1@pci0:0:19:1: class=0x0c0310 card=0x82881043 chip=0x43881002 rev=0x00 > hdr=0x00 > vendor = 'ATI Technologies Inc. / Advanced Micro Devices, Inc.' > device = 'IXP SB600 USB Controller (OHCI1)' > class = serial bus > subclass = USB > ohci2@pci0:0:19:2: class=0x0c0310 card=0x82881043 chip=0x43891002 rev=0x00 > hdr=0x00 > vendor = 'ATI Technologies Inc. / Advanced Micro Devices, Inc.' > device = 'IXP SB600 USB Controller (OHCI2)' > class = serial bus > subclass = USB > ohci3@pci0:0:19:3: class=0x0c0310 card=0x82881043 chip=0x438a1002 rev=0x00 > hdr=0x00 > vendor = 'ATI Technologies Inc. / Advanced Micro Devices, Inc.' > device = 'IXP SB600 USB Controller (OHCI3)' > class = serial bus > subclass = USB > ohci4@pci0:0:19:4: class=0x0c0310 card=0x82881043 chip=0x438b1002 rev=0x00 > hdr=0x00 > vendor = 'ATI Technologies Inc. / Advanced Micro Devices, Inc.' > device = 'IXP SB600 USB Controller (OHCI4)' > class = serial bus > subclass = USB > ehci0@pci0:0:19:5: class=0x0c0320 card=0x82881043 chip=0x43861002 rev=0x00 > hdr=0x00 > vendor = 'ATI Technologies Inc. / Advanced Micro Devices, Inc.' > device = 'IXP SB600 USB Controller (EHCI)' > class = serial bus > subclass = USB > none0@pci0:0:20:0: class=0x0c0500 card=0x82881043 chip=0x43851002 rev=0x14 > hdr=0x00 > vendor = 'ATI Technologies Inc. / Advanced Micro Devices, Inc.' > device = 'ATI SMBus (ATI RD600/RS600)' > class = serial bus > subclass = SMBus > atapci5@pci0:0:20:1: class=0x01018a card=0x82881043 chip=0x438c1002 > rev=0x00 > hdr=0x00 > vendor = 'ATI Technologies Inc. / Advanced Micro Devices, Inc.' > device = 'ATI RD600/RS600 IDE Controller (RD600/RS600)' > class = mass storage > subclass = ATA > none1@pci0:0:20:2: class=0x040300 card=0x82881043 chip=0x43831002 rev=0x00 > hdr=0x00 > vendor = 'ATI Technologies Inc. / Advanced Micro Devices, Inc.' > device = 'IXP SB600 High Definition Audio Controller' > class = multimedia > subclass = HDA > isab0@pci0:0:20:3: class=0x060100 card=0x82881043 chip=0x438d1002 rev=0x00 > hdr=0x00 > vendor = 'ATI Technologies Inc. / Advanced Micro Devices, Inc.' > device = 'IXP SB600 PCI to LPC Bridge' > class = bridge > subclass = PCI-ISA > pcib7@pci0:0:20:4: class=0x060401 card=0x00000000 chip=0x43841002 rev=0x00 > hdr=0x01 > vendor = 'ATI Technologies Inc. / Advanced Micro Devices, Inc.' > device = 'IXP SB600 PCI to PCI Bridge' > class = bridge > subclass = PCI-PCI > hostb1@pci0:0:24:0: class=0x060000 card=0x00000000 chip=0x12001022 > rev=0x00 > hdr=0x00 > vendor = 'Advanced Micro Devices (AMD)' > device = '(Family 10h) Athlon64/Opteron/Sempron HyperTransport > Technology Configuration' > class = bridge > subclass = HOST-PCI > hostb2@pci0:0:24:1: class=0x060000 card=0x00000000 chip=0x12011022 > rev=0x00 > hdr=0x00 > vendor = 'Advanced Micro Devices (AMD)' > device = '(Family 10h) Athlon64/Opteron/Sempron Address Map' > class = bridge > subclass = HOST-PCI > hostb3@pci0:0:24:2: class=0x060000 card=0x00000000 chip=0x12021022 > rev=0x00 > hdr=0x00 > vendor = 'Advanced Micro Devices (AMD)' > device = '(Family 10h) Athlon64/Opteron/Sempron DRAM Controller' > class = bridge > subclass = HOST-PCI > hostb4@pci0:0:24:3: class=0x060000 card=0x00000000 chip=0x12031022 > rev=0x00 > hdr=0x00 > vendor = 'Advanced Micro Devices (AMD)' > device = '(Family 10h) Athlon64/Opteron/Sempron Miscellaneous > Control' > class = bridge > subclass = HOST-PCI > hostb5@pci0:0:24:4: class=0x060000 card=0x00000000 chip=0x12041022 > rev=0x00 > hdr=0x00 > vendor = 'Advanced Micro Devices (AMD)' > device = '(Family 10h) Athlon64/Opteron/Sempron Link Control' > class = bridge > subclass = HOST-PCI > mpt0@pci0:1:0:0: class=0x010000 card=0xa58015d9 chip=0x00581000 rev=0x08 > hdr=0x00 > vendor = 'LSI Logic (Was: Symbios Logic, NCR)' > device = 'SAS 3000 series, 8-port with 1068E -StorPort' > class = mass storage > subclass = SCSI > mpt1@pci0:2:0:0: class=0x010000 card=0xa58015d9 chip=0x00581000 rev=0x08 > hdr=0x00 > vendor = 'LSI Logic (Was: Symbios Logic, NCR)' > device = 'SAS 3000 series, 8-port with 1068E -StorPort' > class = mass storage > subclass = SCSI > atapci0@pci0:3:0:0: class=0x01018f card=0x612111ab chip=0x612111ab > rev=0xb1 > hdr=0x00 > vendor = 'Marvell Semiconductor (Was: Galileo Technology Ltd)' > device = '6121 SATA2 Controller' > class = mass storage > subclass = ATA > mskc0@pci0:4:0:0: class=0x020000 card=0x81f81043 chip=0x436411ab rev=0x12 > hdr=0x00 > vendor = 'Marvell Semiconductor (Was: Galileo Technology Ltd)' > device = 'Yukon PCI-E Gigabit Ethernet Controller (88E8056)' > class = network > subclass = ethernet > atapci2@pci0:5:0:0: class=0x01018f card=0x612111ab chip=0x612111ab > rev=0xb2 > hdr=0x00 > vendor = 'Marvell Semiconductor (Was: Galileo Technology Ltd)' > device = '6121 SATA2 Controller' > class = mass storage > subclass = ATA > mpt2@pci0:6:0:0: class=0x010000 card=0x30a01000 chip=0x00581000 rev=0x08 > hdr=0x00 > vendor = 'LSI Logic (Was: Symbios Logic, NCR)' > device = 'SAS 3000 series, 8-port with 1068E -StorPort' > class = mass storage > subclass = SCSI > em0@pci0:7:5:0: class=0x020000 card=0x13768086 chip=0x107c8086 rev=0x05 > hdr=0x00 > vendor = 'Intel Corporation' > device = 'Gigabit Ethernet Controller (Copper) rev 5 (82541PI)' > class = network > subclass = ethernet > vgapci0@pci0:7:6:0: class=0x030000 card=0x00000000 chip=0x88115333 > rev=0x44 > hdr=0x00 > vendor = 'S3 Graphics Co., Ltd' > device = '86C732 Trio32, 86C764 Trio64, 86C765 Trio64V+ Rev 01' > class = display > subclass = VGA > none2@pci0:7:8:0: class=0x0c0010 card=0x82941043 chip=0x581111c1 rev=0x70 > hdr=0x00 > vendor = 'Lucent/Agere Systems (Was: AT&T MicroElectronics)' > device = '1394A PCI PHY/Link Open Host Ctrlr I/F (FW322)' > class = serial bus > subclass = FireWire > [josh@foghornleghorn /var/log]$ sudo su - > foghornleghorn# pciconf -lvcb > hostb0@pci0:0:0:0: class=0x060000 card=0x59561002 chip=0x59561002 rev=0x00 > hdr=0x00 > vendor = 'ATI Technologies Inc. / Advanced Micro Devices, Inc.' > device = 'RD790 GFX Dual Slot' > class = bridge > subclass = HOST-PCI > cap 08[c4] = HT slave > cap 08[40] = HT retry mode > cap 08[54] = HT unit ID clumping > cap 08[9c] = HT unknown d03c > pcib1@pci0:0:2:0: class=0x060400 card=0x59561002 chip=0x59781002 rev=0x00 > hdr=0x01 > vendor = 'ATI Technologies Inc. / Advanced Micro Devices, Inc.' > device = 'RD790 PCI to PCI bridge (external gfx0 port A)' > class = bridge > subclass = PCI-PCI > cap 01[50] = powerspec 3 supports D0 D3 current D0 > cap 10[58] = PCI-Express 2 root port max data 128(128) link x4(x8) > cap 05[a0] = MSI supports 1 message > cap 0d[b0] = PCI Bridge card=0x59561002 > cap 08[b8] = HT MSI fixed address window enabled at 0xfee00000 > ecap 000b[100] = unknown 1 > ecap 0002[110] = VC 1 max VC0 > pcib2@pci0:0:3:0: class=0x060400 card=0x59561002 chip=0x59791002 rev=0x00 > hdr=0x01 > vendor = 'ATI Technologies Inc. / Advanced Micro Devices, Inc.' > device = 'RD790 PCI to PCI bridge (external gfx0 port B)' > class = bridge > subclass = PCI-PCI > cap 01[50] = powerspec 3 supports D0 D3 current D0 > cap 10[58] = PCI-Express 2 root port max data 128(128) link x4(x8) > cap 05[a0] = MSI supports 1 message > cap 0d[b0] = PCI Bridge card=0x59561002 > cap 08[b8] = HT MSI fixed address window enabled at 0xfee00000 > ecap 000b[100] = unknown 1 > ecap 0002[110] = VC 1 max VC0 > pcib3@pci0:0:4:0: class=0x060400 card=0x59561002 chip=0x597a1002 rev=0x00 > hdr=0x01 > vendor = 'ATI Technologies Inc. / Advanced Micro Devices, Inc.' > device = 'RD790 PCI to PCI bridge (PCIe gpp port A)' > class = bridge > subclass = PCI-PCI > cap 01[50] = powerspec 3 supports D0 D3 current D0 > cap 10[58] = PCI-Express 2 root port max data 128(128) link x1(x2) > cap 05[a0] = MSI supports 1 message > cap 0d[b0] = PCI Bridge card=0x59561002 > cap 08[b8] = HT MSI fixed address window enabled at 0xfee00000 > ecap 000b[100] = unknown 1 > ecap 0002[110] = VC 1 max VC0 > pcib4@pci0:0:6:0: class=0x060400 card=0x59561002 chip=0x597c1002 rev=0x00 > hdr=0x01 > vendor = 'ATI Technologies Inc. / Advanced Micro Devices, Inc.' > device = 'RD790 PCI to PCI bridge (PCIe gpp port C)' > class = bridge > subclass = PCI-PCI > cap 01[50] = powerspec 3 supports D0 D3 current D0 > cap 10[58] = PCI-Express 2 root port max data 128(128) link x1(x1) > cap 05[a0] = MSI supports 1 message > cap 0d[b0] = PCI Bridge card=0x59561002 > cap 08[b8] = HT MSI fixed address window enabled at 0xfee00000 > ecap 000b[100] = unknown 1 > ecap 0002[110] = VC 1 max VC0 > pcib5@pci0:0:7:0: class=0x060400 card=0x59561002 chip=0x597d1002 rev=0x00 > hdr=0x01 > vendor = 'ATI Technologies Inc. / Advanced Micro Devices, Inc.' > device = 'RD790 PCI to PCI bridge (PCIe gpp port D)' > class = bridge > subclass = PCI-PCI > cap 01[50] = powerspec 3 supports D0 D3 current D0 > cap 10[58] = PCI-Express 2 root port max data 128(128) link x1(x1) > cap 05[a0] = MSI supports 1 message > cap 0d[b0] = PCI Bridge card=0x59561002 > cap 08[b8] = HT MSI fixed address window enabled at 0xfee00000 > ecap 000b[100] = unknown 1 > ecap 0002[110] = VC 1 max VC0 > pcib6@pci0:0:11:0: class=0x060400 card=0x59561002 chip=0x59801002 rev=0x00 > hdr=0x01 > vendor = 'ATI Technologies Inc. / Advanced Micro Devices, Inc.' > device = 'RD790 PCI to PCI bridge (external gfx1 port A)' > class = bridge > subclass = PCI-PCI > cap 01[50] = powerspec 3 supports D0 D3 current D0 > cap 10[58] = PCI-Express 2 root port max data 128(128) link x4(x8) > cap 05[a0] = MSI supports 1 message > cap 0d[b0] = PCI Bridge card=0x59561002 > cap 08[b8] = HT MSI fixed address window enabled at 0xfee00000 > ecap 000b[100] = unknown 1 > ecap 0002[110] = VC 1 max VC0 > atapci4@pci0:0:18:0: class=0x01018f card=0x81ef1043 chip=0x43801002 > rev=0x00 > hdr=0x00 > vendor = 'ATI Technologies Inc. / Advanced Micro Devices, Inc.' > device = 'IXP SB600 Serial ATA Controller' > class = mass storage > subclass = ATA > bar [10] = type I/O Port, range 32, base 0x5000, size 8, enabled > bar [14] = type I/O Port, range 32, base 0x4000, size 4, enabled > bar [18] = type I/O Port, range 32, base 0x3000, size 8, enabled > bar [1c] = type I/O Port, range 32, base 0x2000, size 4, enabled > bar [20] = type I/O Port, range 32, base 0x1000, size 16, enabled > bar [24] = type Memory, range 32, base 0xf71ff800, size 1024, enabled > cap 01[60] = powerspec 2 supports D0 D3 current D0 > ohci0@pci0:0:19:0: class=0x0c0310 card=0x82881043 chip=0x43871002 rev=0x00 > hdr=0x00 > vendor = 'ATI Technologies Inc. / Advanced Micro Devices, Inc.' > device = 'IXP SB600 USB Controller (OHCI0)' > class = serial bus > subclass = USB > bar [10] = type Memory, range 32, base 0xf71fe000, size 4096, enabled > ohci1@pci0:0:19:1: class=0x0c0310 card=0x82881043 chip=0x43881002 rev=0x00 > hdr=0x00 > vendor = 'ATI Technologies Inc. / Advanced Micro Devices, Inc.' > device = 'IXP SB600 USB Controller (OHCI1)' > class = serial bus > subclass = USB > bar [10] = type Memory, range 32, base 0xf71fd000, size 4096, enabled > ohci2@pci0:0:19:2: class=0x0c0310 card=0x82881043 chip=0x43891002 rev=0x00 > hdr=0x00 > vendor = 'ATI Technologies Inc. / Advanced Micro Devices, Inc.' > device = 'IXP SB600 USB Controller (OHCI2)' > class = serial bus > subclass = USB > bar [10] = type Memory, range 32, base 0xf71fc000, size 4096, enabled > ohci3@pci0:0:19:3: class=0x0c0310 card=0x82881043 chip=0x438a1002 rev=0x00 > hdr=0x00 > vendor = 'ATI Technologies Inc. / Advanced Micro Devices, Inc.' > device = 'IXP SB600 USB Controller (OHCI3)' > class = serial bus > subclass = USB > bar [10] = type Memory, range 32, base 0xf71fb000, size 4096, enabled > ohci4@pci0:0:19:4: class=0x0c0310 card=0x82881043 chip=0x438b1002 rev=0x00 > hdr=0x00 > vendor = 'ATI Technologies Inc. / Advanced Micro Devices, Inc.' > device = 'IXP SB600 USB Controller (OHCI4)' > class = serial bus > subclass = USB > bar [10] = type Memory, range 32, base 0xf71fa000, size 4096, enabled > ehci0@pci0:0:19:5: class=0x0c0320 card=0x82881043 chip=0x43861002 rev=0x00 > hdr=0x00 > vendor = 'ATI Technologies Inc. / Advanced Micro Devices, Inc.' > device = 'IXP SB600 USB Controller (EHCI)' > class = serial bus > subclass = USB > bar [10] = type Memory, range 32, base 0xf71ff000, size 256, enabled > cap 01[c0] = powerspec 2 supports D0 D1 D2 D3 current D0 > cap 05[d0] = MSI supports 1 message > cap 0a[e4] = EHCI Debug Port at offset 0xe0 in map 0x14 > none0@pci0:0:20:0: class=0x0c0500 card=0x82881043 chip=0x43851002 rev=0x14 > hdr=0x00 > vendor = 'ATI Technologies Inc. / Advanced Micro Devices, Inc.' > device = 'ATI SMBus (ATI RD600/RS600)' > class = serial bus > subclass = SMBus > bar [10] = type I/O Port, range 32, base 0xb00, size 16, enabled > cap 08[b0] = HT MSI fixed address window disabled at 0xfee00000 > atapci5@pci0:0:20:1: class=0x01018a card=0x82881043 chip=0x438c1002 > rev=0x00 > hdr=0x00 > vendor = 'ATI Technologies Inc. / Advanced Micro Devices, Inc.' > device = 'ATI RD600/RS600 IDE Controller (RD600/RS600)' > class = mass storage > subclass = ATA > bar [10] = type I/O Port, range 32, base 0x1f0, size 8, enabled > bar [14] = type I/O Port, range 32, base 0x3f4, size 1, enabled > bar [18] = type I/O Port, range 32, base 0x170, size 8, enabled > bar [1c] = type I/O Port, range 32, base 0x374, size 1, enabled > bar [20] = type I/O Port, range 32, base 0xff00, size 16, enabled > none1@pci0:0:20:2: class=0x040300 card=0x82881043 chip=0x43831002 rev=0x00 > hdr=0x00 > vendor = 'ATI Technologies Inc. / Advanced Micro Devices, Inc.' > device = 'IXP SB600 High Definition Audio Controller' > class = multimedia > subclass = HDA > bar [10] = type Memory, range 64, base 0xf71f4000, size 16384, enabled > cap 01[50] = powerspec 2 supports D0 D3 current D0 > isab0@pci0:0:20:3: class=0x060100 card=0x82881043 chip=0x438d1002 rev=0x00 > hdr=0x00 > vendor = 'ATI Technologies Inc. / Advanced Micro Devices, Inc.' > device = 'IXP SB600 PCI to LPC Bridge' > class = bridge > subclass = PCI-ISA > pcib7@pci0:0:20:4: class=0x060401 card=0x00000000 chip=0x43841002 rev=0x00 > hdr=0x01 > vendor = 'ATI Technologies Inc. / Advanced Micro Devices, Inc.' > device = 'IXP SB600 PCI to PCI Bridge' > class = bridge > subclass = PCI-PCI > hostb1@pci0:0:24:0: class=0x060000 card=0x00000000 chip=0x12001022 > rev=0x00 > hdr=0x00 > vendor = 'Advanced Micro Devices (AMD)' > device = '(Family 10h) Athlon64/Opteron/Sempron HyperTransport > Technology Configuration' > class = bridge > subclass = HOST-PCI > cap 08[80] = HT host > hostb2@pci0:0:24:1: class=0x060000 card=0x00000000 chip=0x12011022 > rev=0x00 > hdr=0x00 > vendor = 'Advanced Micro Devices (AMD)' > device = '(Family 10h) Athlon64/Opteron/Sempron Address Map' > class = bridge > subclass = HOST-PCI > hostb3@pci0:0:24:2: class=0x060000 card=0x00000000 chip=0x12021022 > rev=0x00 > hdr=0x00 > vendor = 'Advanced Micro Devices (AMD)' > device = '(Family 10h) Athlon64/Opteron/Sempron DRAM Controller' > class = bridge > subclass = HOST-PCI > hostb4@pci0:0:24:3: class=0x060000 card=0x00000000 chip=0x12031022 > rev=0x00 > hdr=0x00 > vendor = 'Advanced Micro Devices (AMD)' > device = '(Family 10h) Athlon64/Opteron/Sempron Miscellaneous > Control' > class = bridge > subclass = HOST-PCI > cap 0f[f0] = unknown > hostb5@pci0:0:24:4: class=0x060000 card=0x00000000 chip=0x12041022 > rev=0x00 > hdr=0x00 > vendor = 'Advanced Micro Devices (AMD)' > device = '(Family 10h) Athlon64/Opteron/Sempron Link Control' > class = bridge > subclass = HOST-PCI > mpt0@pci0:1:0:0: class=0x010000 card=0xa58015d9 chip=0x00581000 rev=0x08 > hdr=0x00 > vendor = 'LSI Logic (Was: Symbios Logic, NCR)' > device = 'SAS 3000 series, 8-port with 1068E -StorPort' > class = mass storage > subclass = SCSI > bar [10] = type I/O Port, range 32, base 0x6000, size 256, disabled > bar [14] = type Memory, range 64, base 0xf75fc000, size 16384, enabled > bar [1c] = type Memory, range 64, base 0xf75e0000, size 65536, enabled > cap 01[50] = powerspec 2 supports D0 D1 D2 D3 current D0 > cap 10[68] = PCI-Express 1 endpoint max data 128(4096) link x4(x8) > cap 05[98] = MSI supports 1 message, 64 bit > cap 11[b0] = MSI-X supports 1 message in map 0x14 > ecap 0001[100] = AER 1 1 fatal 1 non-fatal 0 corrected > mpt1@pci0:2:0:0: class=0x010000 card=0xa58015d9 chip=0x00581000 rev=0x08 > hdr=0x00 > vendor = 'LSI Logic (Was: Symbios Logic, NCR)' > device = 'SAS 3000 series, 8-port with 1068E -StorPort' > class = mass storage > subclass = SCSI > bar [10] = type I/O Port, range 32, base 0x7000, size 256, disabled > bar [14] = type Memory, range 64, base 0xf78fc000, size 16384, enabled > bar [1c] = type Memory, range 64, base 0xf78e0000, size 65536, enabled > cap 01[50] = powerspec 2 supports D0 D1 D2 D3 current D0 > cap 10[68] = PCI-Express 1 endpoint max data 128(4096) link x4(x8) > cap 05[98] = MSI supports 1 message, 64 bit > cap 11[b0] = MSI-X supports 1 message in map 0x14 > ecap 0001[100] = AER 1 1 fatal 1 non-fatal 0 corrected > atapci0@pci0:3:0:0: class=0x01018f card=0x612111ab chip=0x612111ab > rev=0xb1 > hdr=0x00 > vendor = 'Marvell Semiconductor (Was: Galileo Technology Ltd)' > device = '6121 SATA2 Controller' > class = mass storage > subclass = ATA > bar [10] = type I/O Port, range 32, base 0x9800, size 8, enabled > bar [14] = type I/O Port, range 32, base 0x9400, size 4, enabled > bar [18] = type I/O Port, range 32, base 0x9000, size 8, enabled > bar [1c] = type I/O Port, range 32, base 0x8800, size 4, enabled > bar [20] = type I/O Port, range 32, base 0x8400, size 16, enabled > bar [24] = type Memory, range 32, base 0xf79ffc00, size 1024, enabled > cap 01[48] = powerspec 2 supports D0 D1 D3 current D0 > cap 05[50] = MSI supports 1 message > cap 10[e0] = PCI-Express 1 legacy endpoint max data 128(128) link x1(x1) > ecap 0001[100] = AER 1 0 fatal 0 non-fatal 2 corrected > mskc0@pci0:4:0:0: class=0x020000 card=0x81f81043 chip=0x436411ab rev=0x12 > hdr=0x00 > vendor = 'Marvell Semiconductor (Was: Galileo Technology Ltd)' > device = 'Yukon PCI-E Gigabit Ethernet Controller (88E8056)' > class = network > subclass = ethernet > bar [10] = type Memory, range 64, base 0xf7afc000, size 16384, enabled > bar [18] = type I/O Port, range 32, base 0xa800, size 256, enabled > cap 01[48] = powerspec 3 supports D0 D1 D2 D3 current D0 > cap 03[50] = VPD > cap 05[5c] = MSI supports 1 message, 64 bit enabled with 1 message > cap 10[e0] = PCI-Express 1 legacy endpoint max data 128(128) link x1(x1) > ecap 0001[100] = AER 1 0 fatal 0 non-fatal 1 corrected > atapci2@pci0:5:0:0: class=0x01018f card=0x612111ab chip=0x612111ab > rev=0xb2 > hdr=0x00 > vendor = 'Marvell Semiconductor (Was: Galileo Technology Ltd)' > device = '6121 SATA2 Controller' > class = mass storage > subclass = ATA > bar [10] = type I/O Port, range 32, base 0xc800, size 8, enabled > bar [14] = type I/O Port, range 32, base 0xc400, size 4, enabled > bar [18] = type I/O Port, range 32, base 0xc000, size 8, enabled > bar [1c] = type I/O Port, range 32, base 0xb800, size 4, enabled > bar [20] = type I/O Port, range 32, base 0xb400, size 16, enabled > bar [24] = type Memory, range 32, base 0xf7bffc00, size 1024, enabled > cap 01[48] = powerspec 2 supports D0 D1 D3 current D0 > cap 05[50] = MSI supports 1 message > cap 10[e0] = PCI-Express 1 legacy endpoint max data 128(128) link x1(x1) > ecap 0001[100] = AER 1 0 fatal 0 non-fatal 1 corrected > mpt2@pci0:6:0:0: class=0x010000 card=0x30a01000 chip=0x00581000 rev=0x08 > hdr=0x00 > vendor = 'LSI Logic (Was: Symbios Logic, NCR)' > device = 'SAS 3000 series, 8-port with 1068E -StorPort' > class = mass storage > subclass = SCSI > bar [10] = type I/O Port, range 32, base 0xd000, size 256, disabled > bar [14] = type Memory, range 64, base 0xf7ffc000, size 16384, enabled > bar [1c] = type Memory, range 64, base 0xf7fe0000, size 65536, enabled > cap 01[50] = powerspec 2 supports D0 D1 D2 D3 current D0 > cap 10[68] = PCI-Express 1 endpoint max data 128(4096) link x4(x8) > cap 05[98] = MSI supports 1 message, 64 bit > cap 11[b0] = MSI-X supports 1 message in map 0x14 > ecap 0001[100] = AER 1 1 fatal 1 non-fatal 0 corrected > em0@pci0:7:5:0: class=0x020000 card=0x13768086 chip=0x107c8086 rev=0x05 > hdr=0x00 > vendor = 'Intel Corporation' > device = 'Gigabit Ethernet Controller (Copper) rev 5 (82541PI)' > class = network > subclass = ethernet > bar [10] = type Memory, range 32, base 0xfebe0000, size 131072, > enabled > bar [14] = type Memory, range 32, base 0xfebc0000, size 131072, > enabled > bar [18] = type I/O Port, range 32, base 0xe800, size 64, enabled > cap 01[dc] = powerspec 2 supports D0 D3 current D0 > cap 07[e4] = PCI-X supports 2048 burst read, 1 split transaction > vgapci0@pci0:7:6:0: class=0x030000 card=0x00000000 chip=0x88115333 > rev=0x44 > hdr=0x00 > vendor = 'S3 Graphics Co., Ltd' > device = '86C732 Trio32, 86C764 Trio64, 86C765 Trio64V+ Rev 01' > class = display > subclass = VGA > bar [10] = type Memory, range 32, base 0xf8000000, size 67108864, > enabled > none2@pci0:7:8:0: class=0x0c0010 card=0x82941043 chip=0x581111c1 rev=0x70 > hdr=0x00 > vendor = 'Lucent/Agere Systems (Was: AT&T MicroElectronics)' > device = '1394A PCI PHY/Link Open Host Ctrlr I/F (FW322)' > class = serial bus > subclass = FireWire > bar [10] = type Memory, range 32, base 0xfeb8f000, size 4096, enabled > cap 01[44] = powerspec 2 supports D0 D1 D2 D3 current D0 > > > > > # vmstat -i > > > > interrupt total rate > irq9: acpi0 1 0 > irq16: atapci0+ 2 0 > irq17: ohci1 ohci3 3 0 > irq18: mpt0 ohci2+ 7066718 31 > irq19: mpt1 atapci* 7798877 34 > irq20: em0 11715792 51 > irq22: atapci4 628883 2 > cpu0: timer 455853831 1999 > irq256: mskc0 97098730 425 > cpu1: timer 455845190 1999 > Total 1036008027 4544 > > > > > # sysctl -a | grep msi > > > > hw.pci.honor_msi_blacklist: 1 > hw.pci.enable_msix: 1 > hw.pci.enable_msi: 1 > > > > > # dmesg > > > > Copyright (c) 1992-2011 The FreeBSD Project. > Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 > The Regents of the University of California. All rights reserved. > FreeBSD is a registered trademark of The FreeBSD Foundation. > FreeBSD 8.2-STABLE #17: Mon Jun 6 19:40:19 EDT 2011 > root@foghornleghorn.res.openband.net: > /usr/obj/usr/src/sys/FOGHORNLEGHORN > amd64 > Timecounter "i8254" frequency 1193182 Hz quality 0 > CPU: AMD Phenom(tm) II X2 555 Processor (3209.77-MHz K8-class CPU) > Origin = "AuthenticAMD" Id = 0x100f43 Family = 10 Model = 4 Stepping = > 3 > > > Features=0x178bfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,MMX,FXSR,SSE,SSE2,HTT> > Features2=0x802009<SSE3,MON,CX16,POPCNT> > AMD > Features=0xee500800<SYSCALL,NX,MMX+,FFXSR,Page1GB,RDTSCP,LM,3DNow!+,3DNow!> > AMD > > Features2=0x37ff<LAHF,CMP,SVM,ExtAPIC,CR8,ABM,SSE4A,MAS,Prefetch,OSVW,IBS,SKINIT,WDT> > TSC: P-state invariant > real memory = 8589934592 (8192 MB) > avail memory = 8257736704 (7875 MB) > ACPI APIC Table: <092310 OEMAPIC > > FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs > FreeBSD/SMP: 1 package(s) x 2 core(s) > cpu0 (BSP): APIC ID: 0 > cpu1 (AP): APIC ID: 1 > ioapic0 <Version 2.1> irqs 0-23 on motherboard > acpi0: <092310 OEMRSDT> on motherboard > acpi0: [ITHREAD] > acpi0: Power Button (fixed) > acpi0: reservation of fee00000, 1000 (3) failed > acpi0: reservation of ffb80000, 80000 (3) failed > acpi0: reservation of fff00000, 100000 (3) failed > acpi0: reservation of 0, a0000 (3) failed > acpi0: reservation of 100000, dff00000 (3) failed > Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000 > acpi_timer0: <32-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0 > cpu0: <ACPI CPU> on acpi0 > cpu1: <ACPI CPU> on acpi0 > acpi_hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on > acpi0 > Timecounter "HPET" frequency 14318180 Hz quality 900 > pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 > pci0: <ACPI PCI bus> on pcib0 > pcib1: <ACPI PCI-PCI bridge> irq 18 at device 2.0 on pci0 > pci1: <ACPI PCI bus> on pcib1 > mpt0: <LSILogic SAS/SATA Adapter> port 0x6000-0x60ff mem > 0xf75fc000-0xf75fffff,0xf75e0000-0xf75effff irq 18 at device 0.0 on pci1 > mpt0: [ITHREAD] > mpt0: MPI Version=1.5.20.0 > pcib2: <ACPI PCI-PCI bridge> irq 19 at device 3.0 on pci0 > pci2: <ACPI PCI bus> on pcib2 > mpt1: <LSILogic SAS/SATA Adapter> port 0x7000-0x70ff mem > 0xf78fc000-0xf78fffff,0xf78e0000-0xf78effff irq 19 at device 0.0 on pci2 > mpt1: [ITHREAD] > mpt1: MPI Version=1.5.20.0 > pcib3: <ACPI PCI-PCI bridge> irq 16 at device 4.0 on pci0 > pci3: <ACPI PCI bus> on pcib3 > atapci0: <Marvell 88SX6121 UDMA133 controller> port > 0x9800-0x9807,0x9400-0x9403,0x9000-0x9007,0x8800-0x8803,0x8400-0x840f mem > 0xf79ffc00-0xf79fffff irq 16 at device 0.0 on pci3 > atapci0: [ITHREAD] > atapci1: <AHCI SATA controller> on atapci0 > atapci1: [ITHREAD] > atapci1: AHCI v1.00 controller with 3 3Gbps ports, PM supported > ata2: <ATA channel 0> on atapci1 > ata2: [ITHREAD] > ata3: <ATA channel 1> on atapci1 > ata3: [ITHREAD] > ata4: <ATA channel 0> on atapci0 > ata4: [ITHREAD] > pcib4: <ACPI PCI-PCI bridge> irq 18 at device 6.0 on pci0 > pci4: <ACPI PCI bus> on pcib4 > mskc0: <Marvell Yukon 88E8056 Gigabit Ethernet> port 0xa800-0xa8ff mem > 0xf7afc000-0xf7afffff irq 18 at device 0.0 on pci4 > msk0: <Marvell Technology Group Ltd. Yukon EC Ultra Id 0xb4 Rev 0x03> on > mskc0 > msk0: Ethernet address: 00:1f:c6:e9:f8:7c > miibus0: <MII bus> on msk0 > e1000phy0: <Marvell 88E1149 Gigabit PHY> PHY 0 on miibus0 > e1000phy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, > 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, auto, auto-flow > mskc0: [ITHREAD] > pcib5: <ACPI PCI-PCI bridge> irq 19 at device 7.0 on pci0 > pci5: <ACPI PCI bus> on pcib5 > atapci2: <Marvell 88SX6121 UDMA133 controller> port > 0xc800-0xc807,0xc400-0xc403,0xc000-0xc007,0xb800-0xb803,0xb400-0xb40f mem > 0xf7bffc00-0xf7bfffff irq 19 at device 0.0 on pci5 > atapci2: [ITHREAD] > atapci3: <AHCI SATA controller> on atapci2 > atapci3: [ITHREAD] > atapci3: AHCI v1.00 controller with 3 3Gbps ports, PM supported > ata5: <ATA channel 0> on atapci3 > ata5: [ITHREAD] > ata6: <ATA channel 1> on atapci3 > ata6: [ITHREAD] > ata7: <ATA channel 0> on atapci2 > ata7: [ITHREAD] > pcib6: <ACPI PCI-PCI bridge> irq 19 at device 11.0 on pci0 > pci6: <ACPI PCI bus> on pcib6 > mpt2: <LSILogic SAS/SATA Adapter> port 0xd000-0xd0ff mem > 0xf7ffc000-0xf7ffffff,0xf7fe0000-0xf7feffff irq 19 at device 0.0 on pci6 > mpt2: [ITHREAD] > mpt2: MPI Version=1.5.19.0 > atapci4: <ATI IXP600 SATA300 controller> port > 0x5000-0x5007,0x4000-0x4003,0x3000-0x3007,0x2000-0x2003,0x1000-0x100f mem > 0xf71ff800-0xf71ffbff irq 22 at device 18.0 on pci0 > atapci4: [ITHREAD] > atapci4: AHCI v1.10 controller with 4 3Gbps ports, PM supported > ata8: <ATA channel 0> on atapci4 > ata8: port is not ready (timeout 0ms) tfd = 000001d0 > ata8: software reset clear timeout > ata8: [ITHREAD] > ata9: <ATA channel 1> on atapci4 > ata9: [ITHREAD] > ata10: <ATA channel 2> on atapci4 > ata10: [ITHREAD] > ata11: <ATA channel 3> on atapci4 > ata11: [ITHREAD] > ohci0: <OHCI (generic) USB controller> mem 0xf71fe000-0xf71fefff irq 16 at > device 19.0 on pci0 > ohci0: [ITHREAD] > usbus0: <OHCI (generic) USB controller> on ohci0 > ohci1: <OHCI (generic) USB controller> mem 0xf71fd000-0xf71fdfff irq 17 at > device 19.1 on pci0 > ohci1: [ITHREAD] > usbus1: <OHCI (generic) USB controller> on ohci1 > ohci2: <OHCI (generic) USB controller> mem 0xf71fc000-0xf71fcfff irq 18 at > device 19.2 on pci0 > ohci2: [ITHREAD] > usbus2: <OHCI (generic) USB controller> on ohci2 > ohci3: <OHCI (generic) USB controller> mem 0xf71fb000-0xf71fbfff irq 17 at > device 19.3 on pci0 > ohci3: [ITHREAD] > usbus3: <OHCI (generic) USB controller> on ohci3 > ohci4: <OHCI (generic) USB controller> mem 0xf71fa000-0xf71fafff irq 18 at > device 19.4 on pci0 > ohci4: [ITHREAD] > usbus4: <OHCI (generic) USB controller> on ohci4 > ehci0: <EHCI (generic) USB 2.0 controller> mem 0xf71ff000-0xf71ff0ff irq 19 > at device 19.5 on pci0 > ehci0: [ITHREAD] > ehci0: AMD SB600/700 quirk applied > usbus5: EHCI version 1.0 > usbus5: <EHCI (generic) USB 2.0 controller> on ehci0 > pci0: <serial bus, SMBus> at device 20.0 (no driver attached) > atapci5: <ATI IXP600 UDMA133 controller> port > 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xff00-0xff0f at device 20.1 on pci0 > ata0: <ATA channel 0> on atapci5 > ata0: [ITHREAD] > pci0: <multimedia, HDA> at device 20.2 (no driver attached) > isab0: <PCI-ISA bridge> at device 20.3 on pci0 > isa0: <ISA bus> on isab0 > pcib7: <ACPI PCI-PCI bridge> at device 20.4 on pci0 > pci7: <ACPI PCI bus> on pcib7 > em0: <Intel(R) PRO/1000 Legacy Network Connection 1.0.3> port 0xe800-0xe83f > mem 0xfebe0000-0xfebfffff,0xfebc0000-0xfebdffff irq 20 at device 5.0 on > pci7 > em0: [FILTER] > em0: Ethernet address: 00:1b:21:4e:e5:2e > vgapci0: <VGA-compatible display> mem 0xf8000000-0xfbffffff at device 6.0 > on > pci7 > pci7: <serial bus, FireWire> at device 8.0 (no driver attached) > acpi_button0: <Power Button> on acpi0 > atrtc0: <AT realtime clock> port 0x70-0x71 irq 8 on acpi0 > acpi_hpet1: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on > acpi0 > device_attach: acpi_hpet1 attach returned 12 > uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0 > uart0: [FILTER] > orm0: <ISA Option ROMs> at iomem > 0xc0000-0xc7fff,0xc8000-0xc87ff,0xc8800-0xc97ff on isa0 > sc0: <System console> at flags 0x100 on isa0 > sc0: VGA <16 virtual consoles, flags=0x300> > vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 > acpi_throttle0: <ACPI CPU Throttling> on cpu0 > acpi_throttle0: CLK_VAL field overlaps THT_EN bit > device_attach: acpi_throttle0 attach returned 6 > hwpstate0: <Cool`n'Quiet 2.0> on cpu0 > Timecounters tick every 1.000 msec > usbus0: 12Mbps Full Speed USB v1.0 > usbus1: 12Mbps Full Speed USB v1.0 > usbus2: 12Mbps Full Speed USB v1.0 > usbus3: 12Mbps Full Speed USB v1.0 > usbus4: 12Mbps Full Speed USB v1.0 > usbus5: 480Mbps High Speed USB v2.0 > ugen0.1: <ATI> at usbus0 > uhub0: <ATI OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus0 > ugen1.1: <ATI> at usbus1 > uhub1: <ATI OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus1 > ugen2.1: <ATI> at usbus2 > uhub2: <ATI OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus2 > ugen3.1: <ATI> at usbus3 > uhub3: <ATI OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus3 > ugen4.1: <ATI> at usbus4 > uhub4: <ATI OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus4 > ugen5.1: <ATI> at usbus5 > uhub5: <ATI EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus5 > ad16: 476940MB <Seagate ST3500641NS 3.AEP> at ata8-master UDMA100 SATA > 3Gb/s > uhub0: 2 ports with 2 removable, self powered > uhub1: 2 ports with 2 removable, self powered > uhub2: 2 ports with 2 removable, self powered > uhub3: 2 ports with 2 removable, self powered > uhub4: 2 ports with 2 removable, self powered > da8 at mpt0 bus 0 scbus0 target 0 lun 0 > da8: <ATA ST31000528AS CC38> Fixed Direct Access SCSI-5 device > da8: 300.000MB/s transfers > da8: Command Queueing enabled > da8: 953869MB (1953525168 512 byte sectors: 255H 63S/T 121601C) > da9 at mpt0 bus 0 scbus0 target 1 lun 0 > da9: <ATA Hitachi HDS72101 A39C> Fixed Direct Access SCSI-5 device > da9: 300.000MB/s transfers > da9: Command Queueing enabled > da9: 953869MB (1953525168 512 byte sectors: 255H 63S/T 121601C) > da10 at mpt0 bus 0 scbus0 target 2 lun 0 > da10: <ATA SAMSUNG HD103SJ 00E4> Fixed Direct Access SCSI-5 device > da10: 300.000MB/s transfers > da10: Command Queueing enabled > da10: 953869MB (1953525168 512 byte sectors: 255H 63S/T 121601C) > da11 at mpt0 bus 0 scbus0 target 3 lun 0 > da11: <ATA SAMSUNG HD103SJ 00E4> Fixed Direct Access SCSI-5 device > da11: 300.000MB/s transfers > da11: Command Queueing enabled > da11: 953869MB (1953525168 512 byte sectors: 255H 63S/T 121601C) > da12 at mpt0 bus 0 scbus0 target 4 lun 0 > da12: <ATA SAMSUNG HD103SI 1118> Fixed Direct Access SCSI-5 device > da12: 300.000MB/s transfers > da12: Command Queueing enabled > da12: 953869MB (1953525168 512 byte sectors: 255H 63S/T 121601C) > da13 at mpt0 bus 0 scbus0 target 5 lun 0 > da13: <ATA SAMSUNG HD103SI 1118> Fixed Direct Access SCSI-5 device > da13: 300.000MB/s transfers > da13: Command Queueing enabled > da13: 953869MB (1953525168 512 byte sectors: 255H 63S/T 121601C) > da14 at mpt0 bus 0 scbus0 target 6 lun 0 > da14: <ATA Hitachi HDS72101 A39C> Fixed Direct Access SCSI-5 device > da14: 300.000MB/s transfers > da14: Command Queueing enabled > da14: 953869MB (1953525168 512 byte sectors: 255H 63S/T 121601C) > da0 at mpt1 bus 0 scbus1 target 0 lun 0 > da0: <ATA Hitachi HDS5C302 A580> Fixed Direct Access SCSI-5 device > da0: 300.000MB/s transfers > da0: Command Queueing enabled > da0: 1907729MB (3907029168 512 byte sectors: 255H 63S/T 243201C) > da1 at mpt1 bus 0 scbus1 target 1 lun 0 > da1: <ATA Hitachi HDS5C302 A580> Fixed Direct Access SCSI-5 device > da1: 300.000MB/s transfers > da1: Command Queueing enabled > da1: 1907729MB (3907029168 512 byte sectors: 255H 63S/T 243201C) > da2 at mpt1 bus 0 scbus1 target 2 lun 0 > da2: <ATA Hitachi HDS5C302 A580> Fixed Direct Access SCSI-5 device > da2: 300.000MB/s transfers > da2: Command Queueing enabled > da2: 1907729MB (3907029168 512 byte sectors: 255H 63S/T 243201C) > da3 at mpt1 bus 0 scbus1 target 3 lun 0 > da3: <ATA Hitachi HDS5C302 A580> Fixed Direct Access SCSI-5 device > da3: 300.000MB/s transfers > da3: Command Queueing enabled > da3: 1907729MB (3907029168 512 byte sectors: 255H 63S/T 243201C) > da4 at mpt1 bus 0 scbus1 target 4 lun 0 > da4: <ATA Hitachi HDS5C302 A580> Fixed Direct Access SCSI-5 device > da4: 300.000MB/s transfers > da4: Command Queueing enabled > da4: 1907729MB (3907029168 512 byte sectors: 255H 63S/T 243201C) > da5 at mpt1 bus 0 scbus1 target 5 lun 0 > da5: <ATA SAMSUNG HD103SI 1118> Fixed Direct Access SCSI-5 device > da5: 300.000MB/s transfers > da5: Command Queueing enabled > da5: 953869MB (1953525168 512 byte sectors: 255H 63S/T 121601C) > da6 at mpt1 bus 0 scbus1 target 6 lun 0 > da6: <ATA ST31000340AS SD04> Fixed Direct Access SCSI-5 device > da6: 300.000MB/s transfers > da6: Command Queueing enabled > da6: 953869MB (1953525168 512 byte sectors: 255H 63S/T 121601C) > da7 at mpt1 bus 0 scbus1 target 7 lun 0 > da7: <ATA SAMSUNG HD103SI 1118> Fixed Direct Access SCSI-5 device > da7: 300.000MB/s transfers > da7: Command Queueing enabled > da7: 953869MB (1953525168 512 byte sectors: 255H 63S/T 121601C) > SMP: AP CPU #1 Launched! > uhub5: 10 ports with 10 removable, self powered > GEOM: da7: geometry does not match label (16h,63s != 255h,63s). > Trying to mount root from ufs:/dev/ad16s1a > WARNING: / was not properly dismounted > ZFS filesystem version 5 > ZFS storage pool version 28 > WARNING: /tmp was not properly dismounted > WARNING: /usr was not properly dismounted > WARNING: /var was not properly dismounted > 0 > mpt1: request 0xffffff80002c57f0:2369 timed out for ccb 0xffffff00063bb000 > (req->ccb 0xffffff00063bb000) > mpt1: attempting to abort req 0xffffff80002c57f0:2369 function 0 > mpt1: mpt_wait_req(1) timed out > mpt1: mpt_recover_commands: abort timed-out. Resetting controller > mpt1: mpt_cam_event: 0x80 > mpt1: mpt_cam_event: 0x80 > mpt1: completing timedout/aborted req 0xffffff80002c57f0:2369 > mpt1: mpt_cam_event: 0x16 > mpt1: mpt_cam_event: 0x12 > mpt1: mpt_cam_event: 0x12 > mpt1: mpt_cam_event: 0x12 > mpt1: mpt_cam_event: 0x12 > mpt1: mpt_cam_event: 0x12 > mpt1: mpt_cam_event: 0x12 > mpt1: mpt_cam_event: 0x12 > mpt1: mpt_cam_event: 0x12 > mpt1: mpt_cam_event: 0x16 > mpt1: request 0xffffff80002c5c70:2375 timed out for ccb 0xffffff00063bb000 > (req->ccb 0xffffff00063bb000) > mpt1: attempting to abort req 0xffffff80002c5c70:2375 function 0 > mpt1: completing timedout/aborted req 0xffffff80002c5c70:2375 > mpt1: > abort of req 0xffffff80002c5c70:0 completed > mpt1: mpt_cam_event: 0x16 > mpt1: mpt_cam_event: 0x16 > mpt1: request 0xffffff80002c5fd0:2379 timed out for ccb 0xffffff00063bb000 > (req->ccb 0xffffff00063bb000) > mpt1: attempting to abort req 0xffffff80002c5fd0:2379 function 0 > mpt1: completing timedout/aborted req 0xffffff80002c5fd0:2379 > mpt1: > abort of req 0xffffff80002c5fd0:0 completed > mpt1: mpt_cam_event: 0x16 > mpt1: mpt_cam_event: 0x16 > mpt1: request 0xffffff80002c6210:2383 timed out for ccb 0xffffff00063bb000 > (req->ccb 0xffffff00063bb000) > mpt1: attempting to abort req 0xffffff80002c6210:2383 function 0 > mpt1: completing timedout/aborted req 0xffffff80002c6210:2383 > mpt1: > abort of req 0xffffff80002c6210:0 completed > mpt1: mpt_cam_event: 0x16 > mpt1: mpt_cam_event: 0x16 > mpt1: request 0xffffff80002c6180:2387 timed out for ccb 0xffffff00063bb000 > (req->ccb 0xffffff00063bb000) > mpt1: attempting to abort req 0xffffff80002c6180:2387 function 0 > mpt1: completing timedout/aborted req 0xffffff80002c6180:2387 > mpt1: > abort of req 0xffffff80002c6180:0 completed > mpt1: mpt_cam_event: 0x16 > mpt1: mpt_cam_event: 0x16 > mpt1: request 0xffffff80002c62a0:2391 timed out for ccb 0xffffff00063bb000 > (req->ccb 0xffffff00063bb000) > mpt1: attempting to abort req 0xffffff80002c62a0:2391 function 0 > mpt1: completing timedout/aborted req 0xffffff80002c62a0:2391 > mpt1: > abort of req 0xffffff80002c62a0:0 completed > mpt1: mpt_cam_event: 0x16 > mpt1: mpt_cam_event: 0x16 > mpt1: request 0xffffff80002c6720:2395 timed out for ccb 0xffffff00063bb000 > (req->ccb 0xffffff00063bb000) > mpt1: attempting to abort req 0xffffff80002c6720:2395 function 0 > mpt1: completing timedout/aborted req 0xffffff80002c6720:2395 > mpt1: > abort of req 0xffffff80002c6720:0 completed > mpt1: mpt_cam_event: 0x16 > mpt1: mpt_cam_event: 0x16 > mpt1: request 0xffffff80002c67b0:2399 timed out for ccb 0xffffff00063bb000 > (req->ccb 0xffffff00063bb000) > mpt1: attempting to abort req 0xffffff80002c67b0:2399 function 0 > mpt1: completing timedout/aborted req 0xffffff80002c67b0:2399 > mpt1: > abort of req 0xffffff80002c67b0:0 completed > mpt1: mpt_cam_event: 0x16 > mpt1: mpt_cam_event: 0x16 > mpt0: request 0xffffff80002a69e0:2082 timed out for ccb 0xffffff0006389800 > (req->ccb 0xffffff0006389800) > mpt0: attempting to abort req 0xffffff80002a69e0:2082 function 0 > mpt0: completing timedout/aborted req 0xffffff80002a69e0:2082 > mpt0: abort of req 0xffffff80002a69e0:0 completed > mpt0: mpt_cam_event: 0x16 > mpt0: mpt_cam_event: 0x16 > mpt0: request 0xffffff80002a6c20:2086 timed out for ccb 0xffffff0006389800 > (req->ccb 0xffffff0006389800) > mpt0: attempting to abort req 0xffffff80002a6c20:2086 function 0 > mpt0: completing timedout/aborted req 0xffffff80002a6c20:2086 > mpt0: abort of req 0xffffff80002a6c20:0 completed > mpt0: mpt_cam_event: 0x16 > mpt0: mpt_cam_event: 0x16 > mpt0: request 0xffffff80002a6cb0:2090 timed out for ccb 0xffffff0006389800 > (req->ccb 0xffffff0006389800) > mpt0: attempting to abort req 0xffffff80002a6cb0:2090 function 0 > mpt0: completing timedout/aborted req 0xffffff80002a6cb0:2090 > mpt0: abort of req 0xffffff80002a6cb0:0 completed > mpt0: mpt_cam_event: 0x16 > mpt0: mpt_cam_event: 0x16 > mpt0: request 0xffffff80002a6b90:2094 timed out for ccb 0xffffff0006389800 > (req->ccb 0xffffff0006389800) > mpt0: attempting to abort req 0xffffff80002a6b90:2094 function 0 > mpt0: completing timedout/aborted req 0xffffff80002a6b90:2094 > mpt0: abort of req 0xffffff80002a6b90:0 completed > mpt0: mpt_cam_event: 0x16 > mpt0: mpt_cam_event: 0x16 > tun0: link state changed to UP > (da8:mpt0:0:0:0): READ(10). CDB: 28 0 3e e2 6f 56 0 0 1 0 > (da8:mpt0:0:0:0): CAM status: SCSI Status Error > (da8:mpt0:0:0:0): SCSI status: Check Condition > (da8:mpt0:0:0:0): SCSI sense: UNIT ATTENTION asc:29,0 (Power on, reset, or > bus device reset occurred) > (da11:mpt0:0:3:0): READ(10). CDB: 28 0 1a b6 92 0 0 0 80 0 > (da11:mpt0:0:3:0): CAM status: SCSI Status Error > (da11:mpt0:0:3:0): SCSI status: Check Condition > (da11:mpt0:0:3:0): SCSI sense: UNIT ATTENTION asc:29,0 (Power on, reset, or > bus device reset occurred) > (da2:mpt1:0:2:0): READ(10). CDB: 28 0 76 7b de 0 0 0 80 0 > (da2:mpt1:0:2:0): CAM status: SCSI Status Error > (da2:mpt1:0:2:0): SCSI status: Check Condition > (da2:mpt1:0:2:0): SCSI sense: UNIT ATTENTION asc:29,0 (Power on, reset, or > bus device reset occurred) > (da10:mpt0:0:2:0): READ(10). CDB: 28 0 1a ff 67 80 0 0 80 0 > (da10:mpt0:0:2:0): CAM status: SCSI Status Error > (da10:mpt0:0:2:0): SCSI status: Check Condition > (da10:mpt0:0:2:0): SCSI sense: UNIT ATTENTION asc:29,0 (Power on, reset, or > bus device reset occurred) > (da5:mpt1:0:5:0): READ(10). CDB: 28 0 1a ff 67 80 0 0 80 0 > (da5:mpt1:0:5:0): CAM status: SCSI Status Error > (da5:mpt1:0:5:0): SCSI status: Check Condition > (da5:mpt1:0:5:0): SCSI sense: UNIT ATTENTION asc:29,0 (Power on, reset, or > bus device reset occurred) > (da7:mpt1:0:7:0): READ(10). CDB: 28 0 40 d7 da 80 0 0 80 0 > (da7:mpt1:0:7:0): CAM status: SCSI Status Error > (da7:mpt1:0:7:0): SCSI status: Check Condition > (da7:mpt1:0:7:0): SCSI sense: UNIT ATTENTION asc:29,0 (Power on, reset, or > bus device reset occurred) > (da6:mpt1:0:6:0): READ(10). CDB: 28 0 40 d7 da 80 0 0 80 0 > (da6:mpt1:0:6:0): CAM status: SCSI Status Error > (da6:mpt1:0:6:0): SCSI status: Check Condition > (da6:mpt1:0:6:0): SCSI sense: UNIT ATTENTION asc:29,0 (Power on, reset, or > bus device reset occurred) > (da0:mpt1:0:0:0): READ(10). CDB: 28 0 76 91 87 e3 0 0 1 0 > (da0:mpt1:0:0:0): CAM status: SCSI Status Error > (da0:mpt1:0:0:0): SCSI status: Check Condition > (da0:mpt1:0:0:0): SCSI sense: UNIT ATTENTION asc:29,0 (Power on, reset, or > bus device reset occurred) > (da3:mpt1:0:3:0): READ(10). CDB: 28 0 76 69 1 1c 0 0 1 0 > (da3:mpt1:0:3:0): CAM status: SCSI Status Error > (da3:mpt1:0:3:0): SCSI status: Check Condition > (da3:mpt1:0:3:0): SCSI sense: UNIT ATTENTION asc:29,0 (Power on, reset, or > bus device reset occurred) > (da1:mpt1:0:1:0): READ(10). CDB: 28 0 76 69 1 1c 0 0 1 0 > (da1:mpt1:0:1:0): CAM status: SCSI Status Error > (da1:mpt1:0:1:0): SCSI status: Check Condition > (da1:mpt1:0:1:0): SCSI sense: UNIT ATTENTION asc:29,0 (Power on, reset, or > bus device reset occurred) > (da9:mpt0:0:1:0): READ(10). CDB: 28 0 1a b3 d7 0 0 0 80 0 > (da9:mpt0:0:1:0): CAM status: SCSI Status Error > (da9:mpt0:0:1:0): SCSI status: Check Condition > (da9:mpt0:0:1:0): SCSI sense: UNIT ATTENTION asc:29,0 (Power on, reset, or > bus device reset occurred) > (da4:mpt1:0:4:0): READ(10). CDB: 28 0 53 3c c6 0 0 0 80 0 > (da4:mpt1:0:4:0): CAM status: SCSI Status Error > (da4:mpt1:0:4:0): SCSI status: Check Condition > (da4:mpt1:0:4:0): SCSI sense: UNIT ATTENTION asc:29,0 (Power on, reset, or > bus device reset occurred) > > > > > > > -- > > | Jeremy Chadwick jdc@parodius.com | > > | Parodius Networking http://www.parodius.com/ | > > | UNIX Systems Administrator Mountain View, CA, US | > > | Making life hard for others since 1977. PGP 4BD6C0CB | > > > > > > > -- > Joshua Boyd > JBipNet > > E-mail: boydjd@jbip.net > > http://www.jbip.net > _______________________________________________ > freebsd-stable@freebsd.org mailing list > http://lists.freebsd.org/mailman/listinfo/freebsd-stable > To unsubscribe, send any mail to "freebsd-stable-unsubscribe@freebsd.org" >
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?BANLkTininFrihBXvsKwAnheqE%2B%2BXoyhCVg>