Date: Fri, 12 Dec 2003 18:28:34 -0700 From: James Earl <james@icionline.ca> To: freebsd-current@freebsd.org Subject: Problems with an0 and 5.2-RC1,BETA Message-ID: <1071278914.3fda6b425a320@webmail.telus.net>
next in thread | raw e-mail | index | archive | help
Hi, I've been having some problems with my an0 device and 5.2-RC1,BETA. 5.1-RELEASE worked great. I am able to get an IP from my AP's dhcp server, and sometimes I can transfer some data. However it seems that at random my system freezes up partially. I get: an0: failed to allocate TX descriptor BUSY an0: failed to read RID ff50 0 0 0 0, 3 BUSY ...repeated very slowly. For all I know it could just be my keyboard that's being frozen. I had my lid light on, and I wasn't even able to turn it off. My guess is I have some interrupt related problems, as I've had them in the past with my fxp0 device, but I haven't been able to figure out how to logically solve the problems. I thought I'd better post just incase... I'd also like 5.2 to be a great release! Here's some information: vmstat output: %vmstat -i interrupt total rate irq0: clk 171531 99 irq1: atkbd0 3955 2 irq8: rtc 219564 127 irq9: acpi0 93 0 irq11: cbb0 an0+++* 150927 87 irq12: psm0 42 0 irq13: npx0 1 0 irq14: ata0 127217 74 irq15: ata1 31 0 Total 673361 392 I'd like to know how to read this, but the manpage didn't seem to help me much. The device: an0: <Cisco Aironet MPI350> port 0x8000-0x80ff mem 0xc0400000-0xc07fffff,0xc0200000-0xc0203fff irq 11 at device 2.0 on pci2 an0: got RSSI <-> dBM map an0: Ethernet address: 00:02:8a:be:48:c0 an0: supported rates: 1Mbps 2Mbps 5.5Mbps 11Mbps %ancontrol -i an0 -I OUI: [ 00:40:96 ] Product number: [ 10 ] Manufacturer name: [ Cisco Systems ] Produce name: [ 350 Series ] Firmware version: [ 5 ] OEM MAC address: [ 00:02:8a:be:48:c0 ] Aironet MAC address: [ 00:02:8a:be:48:c0 ] Radio type: [ 802.11 DS ] Regulatory domain: [ 0 ] Assigned CallID: [ ff:ff:ff:ff:ff:ff ] Supported speeds: [ 1.0Mbps 2.0Mbps 5.5Mbps 11.0Mbps ] RX Diversity: [ antenna 1 and 2 ] TX Diversity: [ antenna 1 and 2 ] Supported power levels: [ 1 5 20 30 50 100 0 0 ] Hardware revision: [ 00:ff ] Software revision: [ 05:00 ] Software subrevision: [ 00:01 ] Interface revision: [ 00:00 ] Bootblock revision: [ 01:59 ]
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?1071278914.3fda6b425a320>