Date: Mon, 12 Aug 2002 14:12:38 -0500 From: "Schroeder, Aaron" <Aaron.Schroeder@qg.com> To: 'Marcin Gryszkalis' <mgryszkalis@cerint.pl>, mjacob@feral.com Cc: freebsd-alpha <freebsd-alpha@FreeBSD.ORG>, freebsd-scsi@FreeBSD.ORG Subject: loader.conf for Miata sound [ was: ISP Nvram [ was 'da driver pro blem?' ]] Message-ID: <025596A38A894B45AFE62346A6BF47464E29A8@waexch1.qgraph.com>
next in thread | raw e-mail | index | archive | help
Sorry for the off topic post/reply. So, I created a /boot/loader.conf, and I enabled the ispfw option. (Did nothing for my tape drive problem, OBTW. I now have it on a separate card, a Symbios 810) However, I noticed that the sound no longer works on my machine. I have a Miata with the on-board ESS1888 sound card. What option would I enable to get said sound card to work again? I tried just enabling all of them with the last option 'snd_load="YES"' and that crashes my machine upon boot-up with a memory management fault. Any ideas? TIA, AJ Schroeder -----Original Message----- From: Marcin Gryszkalis [mailto:mgryszkalis@cerint.pl] Sent: Monday, August 12, 2002 2:06 PM To: mjacob@feral.com Cc: freebsd-alpha; freebsd-scsi@FreeBSD.ORG Subject: Re: ISP Nvram [ was 'da driver problem?' ] Matthew Jacob wrote: > Interrupt the boot process and at the loader prompt do > set isp_debug=0x1f > and boot (or fail to boot) and send us the output. > Or add > set isp_no_nvram=0x1 > to keep NVRAM from being read. I'll try... (I'll be able to do it on wednesday). > You haven't said whether you're now loading isp firmware or not. I loaded ispfw.ko (w/o any difference). Preloaded elf kernel "kernel" at 0xfffffc0000600000. Preloaded elf module "ispfw.ko" at 0xfffffc00006000c0. ... isp0: <Qlogic ISP 1020/1040 PCI SCSI Adapter> port 0x10000-0x100ff mem 0x82018000-0x82018fff irq 12 at device 9.0 on pci0 isp0: interrupting at CIA irq 12 isp0: invalid NVRAM header da0 at isp0 bus 0 target 1 lun 0 da0: <DEC RZ29B (C) DEC 0016> Fixed Direct Access SCSI-2 device da0: 20.000MB/s transfers (10.000MHz, offset 12, 16bit), Tagged Queueing Enabled da0: 4091MB (8380080 512 byte sectors: 255H 63S/T 521C) da1 at isp0 bus 0 target 2 lun 0 da1: <DEC RZ29B (C) DEC 0016> Fixed Direct Access SCSI-2 device da1: 20.000MB/s transfers (10.000MHz, offset 12, 16bit), Tagged Queueing Enabled da1: 4091MB (8380080 512 byte sectors: 255H 63S/T 521C) ... -- Marcin Gryszkalis <mg@cerint.pl> or <dagoon@math.uni.lodz.pl> To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-alpha" in the body of the message To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-alpha" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?025596A38A894B45AFE62346A6BF47464E29A8>