Date: Fri, 19 Jan 2001 08:04:05 -0800 From: "Kevin Oberman" <oberman@es.net> To: hxw_maillist1 <hxw_maillist1@sina.com> Cc: questions@freebsd.org Subject: Re: Crystal 4232 Sound Card Message-ID: <200101191604.f0JG46S13229@ptavv.es.net> In-Reply-To: Your message of "Thu, 18 Jan 2001 17:22:51 %2B0800." <20010118092251.2799.qmail@sina.com>
next in thread | previous in thread | raw e-mail | index | archive | help
> From: hxw_maillist1 <hxw_maillist1@sina.com> > Date: Thu, Jan 18 2001 17:22:51 +0800 > > Dear Sirs, > After I configure the kernel like this > > # Sound Card > device pcm0 at isa? port? irq 5 drq 1 flags 0x10 > device sbc0 at isa? port 0x220 irq 5 drq 1 flags 0x10 > > my 4.2-release can probe my sound card correctly: > > sbc0: <Soundblaster Pro> at port 0x220-0x22f irq 5 drq 1 flags 0x10 on isa0 > pcm1: <SB DSP 3.02> on sbc0 > > But no matter I patch /usr/src/sys/conf/files like you said or not, my amp-0.7.6 always can't work correctly and it complains that > > Unable to set required audio format > Broken pipe > > By the way, the system will not probe my sound card if I configure the kernel like this > > device pcm0 at isa? port 0x52c irq 5 drq 1 flags 0x10 > > I don't why. I hope you can give me some other hints. Why are you trying to use the sbc driver for a cs4232? This makes no sense at all that I can see. I have a 600E and it is possible that the 600 sound card is set up somewhat differently, but it is certainly not a SoundBlaster Pro and the patch would not be applicable. Have you done a /dev/MAKEDEV snd0? While it will probably not work right, you can also try: device pcm combined with options PNPBIOS and see what the probes show. Note that the relevant stuff (csa and pcm devices) may be probed in widely separated parts of the probe process. R. Kevin Oberman, Network Engineer Energy Sciences Network (ESnet) Ernest O. Lawrence Berkeley National Laboratory (Berkeley Lab) E-mail: oberman@es.net Phone: +1 510 486-8634 To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?200101191604.f0JG46S13229>