Date: Thu, 21 Feb 2002 22:11:40 -0500 (EST) From: Elliot Dierksen <elliot@alfred.oau.org> To: freebsd-hardware@freebsd.org Subject: Problems with Tyan 2466 MBD Message-ID: <200202220311.g1M3Bes75575@alfred.oau.org>
next in thread | raw e-mail | index | archive | help
Hello,
I have a spiffy new Tyan 2466 760 MPX motherboard that is giving me a few
problems. I can not get the psm device to find my mouse. I know the mouse is
working because I put 2000 server in another partition, and it find the mouse
just fine. See the following dmesg excerpts:
psm0: current command byte:0047
psm0: failed to reset the aux device.
I have tried several flags options such as no reset and ignore port
error, but no success.
Secondly, the xl device is having a problem with the on board 3C920 chipset.
If I run the production BIOS [1.00 ;-)], I get endless
"xl0: reset didn't complete" messages and the NIC is not usable. If I run
the BETA BIOS, I still get one such message but I can use the NIC.
I am running 4.5-STABLE as of about 4 days ago. I would be happy to provide
any information I can to try and resolve the problem. Any suggestions
appreciated!
Thanx,
EBD
-----begin full dmesg-------
Copyright (c) 1992-2002 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD 4.5-STABLE #4: Thu Feb 21 21:58:33 EST 2002
root@newalf.oau.org:/usr/src/sys/compile/AMD-MP
Calibrating clock(s) ... TSC clock: 1533086052 Hz, i8254 clock: 1192947 Hz
CLK_USE_I8254_CALIBRATION not specified - using default frequency
Timecounter "i8254" frequency 1193182 Hz
CLK_USE_TSC_CALIBRATION not specified - using old calibration method
CPU: AMD Athlon(tm) MP 1800+ (1533.39-MHz 686-class CPU)
Origin = "AuthenticAMD" Id = 0x662 Stepping = 2
Features=0x383fbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE>
AMD Features=0xc0480000<<b19>,AMIE,DSP,3DNow!>
Data TLB: 32 entries, fully associative
Instruction TLB: 16 entries, fully associative
L1 data cache: 64 kbytes, 64 bytes/line, 1 lines/tag, 2-way associative
L1 instruction cache: 64 kbytes, 64 bytes/line, 1 lines/tag, 2-way associative
L2 internal cache: 256 kbytes, 64 bytes/line, 1 lines/tag, 8-way associative
real memory = 536870912 (524288K bytes)
Physical memory chunk(s):
0x00001000 - 0x0009cfff, 638976 bytes (156 pages)
0x00470000 - 0x1feeffff, 531103744 bytes (129664 pages)
0x1ff00000 - 0x1fff7fff, 1015808 bytes (248 pages)
config> di pcic0
config> di sn0
config> di lnc0
config> di ie0
config> di fe0
config> di ed0
config> di cs0
config> di bt0
config> di ata1
config> di ata0
config> di aic0
config> di aha0
config> di adv0
config> en apm0
config> #flags psm0 0x1000
Invalid command or syntax. Type `?' for help.
config> q
avail memory = 517914624 (505776K bytes)
Programming 24 pins in IOAPIC #0
IOAPIC #0 intpin 2 -> irq 0
SMP: CPU0 apic_initialize():
lint0: 0x00000700 lint1: 0x00010400 TPR: 0x00000010 SVR: 0x000001ff
FreeBSD/SMP: Multiprocessor motherboard
cpu0 (BSP): apic id: 0, version: 0x00040010, at 0xfee00000
io0 (APIC): apic id: 1, version: 0x00170011, at 0xfec00000
bios32: Found BIOS32 Service Directory header at 0xc00f7180
bios32: Entry = 0xfd670 (c00fd670) Rev = 0 Len = 1
pcibios: PCI BIOS entry at 0x120
pnpbios: Found PnP BIOS data at 0xc00f71e0
pnpbios: Entry = f0000:989c Rev = 1.0
Other BIOS signatures found:
ACPI: 000f71b0
Preloaded elf kernel "kernel" at 0xc0446000.
Preloaded userconfig_script "/boot/kernel.conf" at 0xc04460a8.
Pentium Pro MTRR support enabled
md0: Malloc disk
Creating DISK md0
Math emulator present
SMP: CPU0 bsp_apic_configure():
lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000010 SVR: 0x000001ff
pci_open(1): mode 1 addr port (0x0cf8) is 0x80004108
pci_open(1a): mode1res=0x80000000 (0x80000000)
pci_cfgcheck: device 0 [class=060000] [hdr=00] is there (id=700c1022)
Using $PIR table, 11 entries at 0xc00fdf10
apm0: <APM BIOS> on motherboard
apm: found APM BIOS v1.2, connected at v1.2
npx0: <math processor> on motherboard
npx0: INT 16 interface
pcib0: <Host to PCI bridge> on motherboard
found-> vendor=0x1022, dev=0x700c, revid=0x11
class=06-00-00, hdrtype=0x00, mfdev=0
subordinatebus=0 secondarybus=0
map[10]: type 1, range 32, base c0000000, size 29
map[14]: type 1, range 32, base b0400000, size 12
found-> vendor=0x1022, dev=0x700d, revid=0x00
class=06-04-00, hdrtype=0x01, mfdev=0
subordinatebus=1 secondarybus=1
found-> vendor=0x1022, dev=0x7440, revid=0x04
class=06-01-00, hdrtype=0x00, mfdev=1
subordinatebus=0 secondarybus=0
found-> vendor=0x1022, dev=0x7441, revid=0x04
class=01-01-8a, hdrtype=0x00, mfdev=0
subordinatebus=0 secondarybus=0
map[20]: type 1, range 32, base 0000f000, size 4
found-> vendor=0x1022, dev=0x7443, revid=0x03
class=06-80-00, hdrtype=0x00, mfdev=0
subordinatebus=0 secondarybus=0
found-> vendor=0x1044, dev=0xa500, revid=0x01
class=06-04-00, hdrtype=0x01, mfdev=1
subordinatebus=2 secondarybus=2
found-> vendor=0x1044, dev=0xa501, revid=0x01
class=0e-00-01, hdrtype=0x00, mfdev=1
subordinatebus=0 secondarybus=0
intpin=a, irq=11
map[10]: type 1, range 32, base e0000000, size 28
found-> vendor=0x1022, dev=0x7448, revid=0x04
class=06-04-00, hdrtype=0x01, mfdev=0
subordinatebus=3 secondarybus=3
pci0: <PCI bus> on pcib0
pcib1: <PCI to PCI bridge (vendor=1022 device=700d)> at device 1.0 on pci0
found-> vendor=0x5333, dev=0x8a22, revid=0x02
class=03-00-00, hdrtype=0x00, mfdev=0
subordinatebus=0 secondarybus=0
intpin=a, irq=10
map[10]: type 1, range 32, base b0000000, size 19
map[14]: type 1, range 32, base b8000000, size 27
pci1: <PCI bus> on pcib1
pci1: <S3 Savage 4 graphics accelerator> (vendor=0x5333, dev=0x8a22) at 5.0 irq 10
isab0: <PCI to ISA bridge (vendor=1022 device=7440)> at device 7.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Generic PCI ATA controller> port 0xf000-0xf00f at device 7.1 on pci0
ata0: iobase=0x01f0 altiobase=0x03f6 bmaddr=0xf000
ata0: mask=03 status0=50 status1=00
ata0: mask=03 ostat0=50 ostat2=00
ata0-master: ATAPI probe a=14 b=eb
ata0-slave: ATAPI probe a=7f b=7f
ata0: mask=03 status0=10 status1=00
ata0: devices=04
ata0: at 0x1f0 irq 14 on atapci0
ata1: iobase=0x0170 altiobase=0x0376 bmaddr=0xf008
ata1: mask=03 status0=20 status1=30
ata1: mask=03 ostat0=20 ostat2=30
ata1-master: ATAPI probe a=20 b=20
ata1-slave: ATAPI probe a=30 b=30
ata1: mask=03 status0=20 status1=30
ata1-master: ATA probe a=25 b=25
ata1-slave: ATA probe a=25 b=25
ata1: devices=00
ata1: at 0x170 irq 15 on atapci0
chip1: <PCI to Other bridge (vendor=1022 device=7443)> at device 7.3 on pci0
pcib2: <PCI to PCI bridge (vendor=1044 device=a500)> at device 8.0 on pci0
pci2: <PCI bus> on pcib2
asr0: <Adaptec Caching SCSI RAID> mem 0xe0000000-0xefffffff irq 11 at device 8.1 on pci0
asr0: major=154
asr0: ADAPTEC 3210S FW Rev. 3607, 2 channel, 256 CCBs, Protocol I2O
pcib3: <PCI to PCI bridge (vendor=1022 device=7448)> at device 16.0 on pci0
found-> vendor=0x10b7, dev=0x9200, revid=0x78
class=02-00-00, hdrtype=0x00, mfdev=0
subordinatebus=0 secondarybus=0
intpin=a, irq=5
map[10]: type 1, range 32, base 00002000, size 7
map[14]: type 1, range 32, base b0101000, size 7
pci3: <PCI bus> on pcib3
xl0: <3Com 3c905C-TX Fast Etherlink XL> port 0x2000-0x207f mem 0xb0101000-0xb010107f irq 5 at device 8.0 on pci3
xl0: reset didn't complete
xl0: Ethernet address: 00:e0:81:20:3b:c8
xl0: media options word: a
xl0: found MII/AUTO
miibus0: <MII bus> on xl0
ukphy0: <Generic IEEE 802.3u media interface> on miibus0
ukphy0: OUI 0x00105a, model 0x0000, rev. 0
ukphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
bpf: xl0 attached
ex_isa_identify()
ata-: ata0 exists, using next available unit number
ata-: ata1 exists, using next available unit number
Trying Read_Port at 203
Trying Read_Port at 243
Trying Read_Port at 283
Trying Read_Port at 2c3
Trying Read_Port at 303
Trying Read_Port at 343
Trying Read_Port at 383
Trying Read_Port at 3c3
isa_probe_children: disabling PnP devices
isa_probe_children: probing non-PnP devices
orm0: <Option ROMs> at iomem 0xc0000-0xcafff,0xcb000-0xcb7ff,0xcb800-0xd17ff on isa0
fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
ata2: not probed (disabled)
ata3: not probed (disabled)
adv0: not probed (disabled)
bt0: not probed (disabled)
aha0: not probed (disabled)
aic0: not probed (disabled)
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
atkbd: the current kbd controller command byte 0047
atkbd: keyboard ID 0x41ab (2)
kbd0 at atkbd0
kbd0: atkbd0, AT 101/102 (2), config:0x1, flags:0x3d0000
psm0: current command byte:0047
psm0: failed to reset the aux device.
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
fb0: vga0, vga, type:VGA (5), flags:0x7007f
fb0: port:0x3c0-0x3df, crtc:0x3d4, mem:0xa0000 0x20000
fb0: init mode:24, bios mode:3, current mode:24
fb0: window:0xc00b8000 size:32k gran:32k, buf:0 size:32k
VGA parameters upon power-up
50 18 10 00 00 00 03 00 02 67 5f 4f 50 82 55 81
bf 1f 00 4f 0d 0e 00 00 05 50 9c 8e 8f 28 1f 96
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff
VGA parameters in BIOS for mode 24
50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 55 81
bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff
EGA/VGA parameters to be used for mode 24
50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 55 81
bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sc0: fb0, kbd0, terminal emulator: sc (syscons terminal)
pcic0: not probed (disabled)
pcic1: not probed (disabled)
sio0: irq maps: 0x4041 0x4051 0x4041 0x4041
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 16550A
sio1: configured irq 3 not in bitmap of probed irqs 0
sio1: irq maps: 0x4041 0x4041 0x4041 0x4041
sio1: probe failed test(s): 0 1 2 4 6 7 9
sio1 failed to probe at port 0x2f8-0x2ff irq 3 on isa0
sio2: not probed (disabled)
sio3: not probed (disabled)
ppc0: parallel port found at 0x378
ppc0: using extended I/O port range
ppc0: SPP
ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0
ppc0: Generic chipset (NIBBLE-only) in COMPATIBLE mode
plip0: <PLIP network interface> on ppbus0
bpf: lp0 attached
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
ed0: not probed (disabled)
fe0: not probed (disabled)
ie0: not probed (disabled)
lnc0: not probed (disabled)
cs0: not probed (disabled)
sn0: not probed (disabled)
isa_probe_children: probing PnP devices
SMP: enabled INTs: 1, 4, 5, 6, 7, 11, 14, 15, apic_imen: 0x00ff370d
BIOS Geometries:
0:03fffe3f 0..1023=1024 cylinders, 0..254=255 heads, 1..63=63 sectors
0 accounted for
Device configuration finished.
bpf: lo0 attached
ata0-master: piomode=4 dmamode=2 udmamode=2 dmaflag=1
ata0-master: success setting PIO4 on generic chip
acd0: <ATAPI-CD ROM-DRIVE-52MAX/VER 52CE> CDROM drive at ata0 as master
acd0: read 3437KB/s (48034KB/s), 128KB buffer, PIO4
acd0: Reads: CD-R, CD-RW, CD-DA stream, packet
acd0: Audio: play, 255 volume levels
acd0: Mechanism: ejectable tray
acd0: Medium: CD-ROM 120mm data disc loaded, unlocked
Creating DISK da0
pass0 at asr0 bus 0 target 0 lun 0
pass0: <ADAPTEC RAID-1 3607> Fixed Direct Access SCSI-2 device
pass0: Serial Number +
pass0: Tagged Queueing Enabled
da0 at asr0 bus 0 target 0 lun 0
da0: <ADAPTEC RAID-1 3607> Fixed Direct Access SCSI-2 device
da0: Serial Number +
da0: Tagged Queueing Enabled
da0: 35003MB (71686144 512 byte sectors: 255H 63S/T 4462C)
Mounting root from ufs:/dev/da0s1a
da0s1: type 0xa5, start 63, end = 16771859, size 16771797 : OK
da0s2: type 0x7, start 16771860, end = 33543719, size 16771860
da0s2: C/H/S start 1023/0/1 (16434495) != start 16771860: invalid
start_init: trying /sbin/init
-----ebd full dmesg-------
--
Elliot Dierksen "They that can give up essential liberty to
obtain a little temporary safety deserve
neither liberty nor safety" -- Benjamin Franklin
Home) ebd@oau.org (407) 850-9760
To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-hardware" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?200202220311.g1M3Bes75575>