Date: Mon, 24 Feb 2014 04:47:17 +0000 (UTC) From: Adrian Chadd <adrian@FreeBSD.org> To: src-committers@freebsd.org, svn-src-all@freebsd.org, svn-src-head@freebsd.org Subject: svn commit: r262430 - in head/sys: conf dev/etherswitch/arswitch Message-ID: <201402240447.s1O4lHO7017386@svn.freebsd.org>
next in thread | raw e-mail | index | archive | help
Author: adrian Date: Mon Feb 24 04:47:16 2014 New Revision: 262430 URL: http://svnweb.freebsd.org/changeset/base/262430 Log: Add initial AR8327 support. This is (almost!) enough to actually probe, attach, configure a default port group and do some basic work. It's also totally hard-coded for the Qualcomm Atheros DB120 board - it doesn't yet have any of the code from OpenWRT which parses extra configuration data to know how to program the switch. The LED stuff is also missing. But, it's enough to facilitate board, PHY, switch and VLAN bringup, so I am committing it now. Tested: * Qualcomm Atheros DB120 Obtained from: OpenWRT Added: head/sys/dev/etherswitch/arswitch/arswitch_8327.c (contents, props changed) head/sys/dev/etherswitch/arswitch/arswitch_8327.h (contents, props changed) Modified: head/sys/conf/files Modified: head/sys/conf/files ============================================================================== --- head/sys/conf/files Mon Feb 24 04:44:28 2014 (r262429) +++ head/sys/conf/files Mon Feb 24 04:47:16 2014 (r262430) @@ -1343,6 +1343,7 @@ dev/etherswitch/arswitch/arswitch_phy.c dev/etherswitch/arswitch/arswitch_8216.c optional arswitch dev/etherswitch/arswitch/arswitch_8226.c optional arswitch dev/etherswitch/arswitch/arswitch_8316.c optional arswitch +dev/etherswitch/arswitch/arswitch_8327.c optional arswitch dev/etherswitch/arswitch/arswitch_7240.c optional arswitch dev/etherswitch/arswitch/arswitch_9340.c optional arswitch dev/etherswitch/arswitch/arswitch_vlans.c optional arswitch Added: head/sys/dev/etherswitch/arswitch/arswitch_8327.c ============================================================================== --- /dev/null 00:00:00 1970 (empty, because file is newly added) +++ head/sys/dev/etherswitch/arswitch/arswitch_8327.c Mon Feb 24 04:47:16 2014 (r262430) @@ -0,0 +1,473 @@ +/*- + * Copyright (c) 2011-2012 Stefan Bethke. + * Copyright (c) 2014 Adrian Chadd. + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * + * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND + * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE + * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE + * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS + * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) + * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT + * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY + * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF + * SUCH DAMAGE. + * + * $FreeBSD$ + */ + +#include <sys/param.h> +#include <sys/bus.h> +#include <sys/errno.h> +#include <sys/kernel.h> +#include <sys/module.h> +#include <sys/socket.h> +#include <sys/sockio.h> +#include <sys/sysctl.h> +#include <sys/systm.h> + +#include <net/if.h> +#include <net/if_arp.h> +#include <net/ethernet.h> +#include <net/if_dl.h> +#include <net/if_media.h> +#include <net/if_types.h> + +#include <machine/bus.h> +#include <dev/iicbus/iic.h> +#include <dev/iicbus/iiconf.h> +#include <dev/iicbus/iicbus.h> +#include <dev/mii/mii.h> +#include <dev/mii/miivar.h> +#include <dev/etherswitch/mdio.h> + +#include <dev/etherswitch/etherswitch.h> + +#include <dev/etherswitch/arswitch/arswitchreg.h> +#include <dev/etherswitch/arswitch/arswitchvar.h> +#include <dev/etherswitch/arswitch/arswitch_reg.h> +#include <dev/etherswitch/arswitch/arswitch_8327.h> + +#include "mdio_if.h" +#include "miibus_if.h" +#include "etherswitch_if.h" + +static void +ar8327_phy_fixup(struct arswitch_softc *sc, int phy) +{ + + switch (sc->chip_rev) { + case 1: + /* For 100M waveform */ + arswitch_writedbg(sc->sc_dev, phy, 0, 0x02ea); + /* Turn on Gigabit clock */ + arswitch_writedbg(sc->sc_dev, phy, 0x3d, 0x68a0); + break; + + case 2: + arswitch_writemmd(sc->sc_dev, phy, 0x7, 0x3c); + arswitch_writemmd(sc->sc_dev, phy, 0x4007, 0x0); + /* fallthrough */ + case 4: + arswitch_writemmd(sc->sc_dev, phy, 0x3, 0x800d); + arswitch_writemmd(sc->sc_dev, phy, 0x4003, 0x803f); + + arswitch_writedbg(sc->sc_dev, phy, 0x3d, 0x6860); + arswitch_writedbg(sc->sc_dev, phy, 0x5, 0x2c46); + arswitch_writedbg(sc->sc_dev, phy, 0x3c, 0x6000); + break; + } +} + +static uint32_t +ar8327_get_pad_cfg(struct ar8327_pad_cfg *cfg) +{ + uint32_t t; + + if (!cfg) + return (0); + + t = 0; + switch (cfg->mode) { + case AR8327_PAD_NC: + break; + + case AR8327_PAD_MAC2MAC_MII: + t = AR8327_PAD_MAC_MII_EN; + if (cfg->rxclk_sel) + t |= AR8327_PAD_MAC_MII_RXCLK_SEL; + if (cfg->txclk_sel) + t |= AR8327_PAD_MAC_MII_TXCLK_SEL; + break; + + case AR8327_PAD_MAC2MAC_GMII: + t = AR8327_PAD_MAC_GMII_EN; + if (cfg->rxclk_sel) + t |= AR8327_PAD_MAC_GMII_RXCLK_SEL; + if (cfg->txclk_sel) + t |= AR8327_PAD_MAC_GMII_TXCLK_SEL; + break; + + case AR8327_PAD_MAC_SGMII: + t = AR8327_PAD_SGMII_EN; + + /* + * WAR for the QUalcomm Atheros AP136 board. + * It seems that RGMII TX/RX delay settings needs to be + * applied for SGMII mode as well, The ethernet is not + * reliable without this. + */ + t |= cfg->txclk_delay_sel << AR8327_PAD_RGMII_TXCLK_DELAY_SEL_S; + t |= cfg->rxclk_delay_sel << AR8327_PAD_RGMII_RXCLK_DELAY_SEL_S; + if (cfg->rxclk_delay_en) + t |= AR8327_PAD_RGMII_RXCLK_DELAY_EN; + if (cfg->txclk_delay_en) + t |= AR8327_PAD_RGMII_TXCLK_DELAY_EN; + + if (cfg->sgmii_delay_en) + t |= AR8327_PAD_SGMII_DELAY_EN; + + break; + + case AR8327_PAD_MAC2PHY_MII: + t = AR8327_PAD_PHY_MII_EN; + if (cfg->rxclk_sel) + t |= AR8327_PAD_PHY_MII_RXCLK_SEL; + if (cfg->txclk_sel) + t |= AR8327_PAD_PHY_MII_TXCLK_SEL; + break; + + case AR8327_PAD_MAC2PHY_GMII: + t = AR8327_PAD_PHY_GMII_EN; + if (cfg->pipe_rxclk_sel) + t |= AR8327_PAD_PHY_GMII_PIPE_RXCLK_SEL; + if (cfg->rxclk_sel) + t |= AR8327_PAD_PHY_GMII_RXCLK_SEL; + if (cfg->txclk_sel) + t |= AR8327_PAD_PHY_GMII_TXCLK_SEL; + break; + + case AR8327_PAD_MAC_RGMII: + t = AR8327_PAD_RGMII_EN; + t |= cfg->txclk_delay_sel << AR8327_PAD_RGMII_TXCLK_DELAY_SEL_S; + t |= cfg->rxclk_delay_sel << AR8327_PAD_RGMII_RXCLK_DELAY_SEL_S; + if (cfg->rxclk_delay_en) + t |= AR8327_PAD_RGMII_RXCLK_DELAY_EN; + if (cfg->txclk_delay_en) + t |= AR8327_PAD_RGMII_TXCLK_DELAY_EN; + break; + + case AR8327_PAD_PHY_GMII: + t = AR8327_PAD_PHYX_GMII_EN; + break; + + case AR8327_PAD_PHY_RGMII: + t = AR8327_PAD_PHYX_RGMII_EN; + break; + + case AR8327_PAD_PHY_MII: + t = AR8327_PAD_PHYX_MII_EN; + break; + } + + return (t); +} +/* + * Initialise the ar8327 specific hardware features from + * the hints provided in the boot environment. + */ +static int +ar8327_init_pdata(struct arswitch_softc *sc) +{ + struct ar8327_pad_cfg pc; + uint32_t t; + + /* XXX hard-coded DB120 defaults for now! */ + + /* Port 0 - rgmii; 1000/full */ + + /* Port 6 - ignore */ + + /* Pad 0 */ + bzero(&pc, sizeof(pc)); + pc.mode = AR8327_PAD_MAC_RGMII, + pc.txclk_delay_en = true, + pc.rxclk_delay_en = true, + pc.txclk_delay_sel = AR8327_CLK_DELAY_SEL1, + pc.rxclk_delay_sel = AR8327_CLK_DELAY_SEL2, + + t = ar8327_get_pad_cfg(&pc); +#if 0 + if (AR8X16_IS_SWITCH(sc, AR8337)) + t |= AR8337_PAD_MAC06_EXCHANGE_EN; +#endif + arswitch_writereg(sc->sc_dev, AR8327_REG_PAD0_MODE, t); + + /* Pad 5 */ + bzero(&pc, sizeof(pc)); + t = ar8327_get_pad_cfg(&pc); + arswitch_writereg(sc->sc_dev, AR8327_REG_PAD5_MODE, t); + + /* Pad 6 */ + bzero(&pc, sizeof(pc)); + t = ar8327_get_pad_cfg(&pc); + arswitch_writereg(sc->sc_dev, AR8327_REG_PAD6_MODE, t); + + /* LED config */ + + /* SGMII config */ + return (0); +} + +#if 0 +/* + * Map the hard-coded port config from the switch setup to + * the chipset port config (status, duplex, flow, etc.) + */ +static uint32_t +ar8327_get_port_init_status(struct ar8327_port_cfg *cfg) +{ + uint32_t t; + + if (!cfg->force_link) + return (AR8X16_PORT_STS_LINK_AUTO); + + t = AR8X16_PORT_STS_TXMAC | AR8X16_PORT_STS_RXMAC; + t |= cfg->duplex ? AR8X16_PORT_STS_DUPLEX : 0; + t |= cfg->rxpause ? AR8X16_PORT_STS_RXFLOW : 0; + t |= cfg->txpause ? AR8X16_PORT_STS_TXFLOW : 0; + + switch (cfg->speed) { + case AR8327_PORT_SPEED_10: + t |= AR8X16_PORT_STS_SPEED_10; + break; + case AR8327_PORT_SPEED_100: + t |= AR8X16_PORT_STS_SPEED_100; + break; + case AR8327_PORT_SPEED_1000: + t |= AR8X16_PORT_STS_SPEED_1000; + break; + } + + return (t); +} +#endif + +static int +ar8327_hw_setup(struct arswitch_softc *sc) +{ + int i; + int err; + + /* pdata fetch and setup */ + err = ar8327_init_pdata(sc); + if (err != 0) + return (err); + + /* XXX init leds */ + + for (i = 0; i < AR8327_NUM_PHYS; i++) { + /* phy fixup */ + ar8327_phy_fixup(sc, i); + + /* start PHY autonegotiation? */ + /* XXX is this done as part of the normal PHY setup? */ + + }; + + /* Let things settle */ + DELAY(1000); + + return (0); +} + +/* + * Initialise other global values, for the AR8327. + */ +static int +ar8327_hw_global_setup(struct arswitch_softc *sc) +{ + uint32_t t; + + /* enable CPU port and disable mirror port */ + t = AR8327_FWD_CTRL0_CPU_PORT_EN | + AR8327_FWD_CTRL0_MIRROR_PORT; + arswitch_writereg(sc->sc_dev, AR8327_REG_FWD_CTRL0, t); + + /* forward multicast and broadcast frames to CPU */ + t = (AR8327_PORTS_ALL << AR8327_FWD_CTRL1_UC_FLOOD_S) | + (AR8327_PORTS_ALL << AR8327_FWD_CTRL1_MC_FLOOD_S) | + (AR8327_PORTS_ALL << AR8327_FWD_CTRL1_BC_FLOOD_S); + arswitch_writereg(sc->sc_dev, AR8327_REG_FWD_CTRL1, t); + + /* enable jumbo frames */ + /* XXX need to macro-shift the value! */ + arswitch_modifyreg(sc->sc_dev, AR8327_REG_MAX_FRAME_SIZE, + AR8327_MAX_FRAME_SIZE_MTU, 9018 + 8 + 2); + + /* Enable MIB counters */ + arswitch_modifyreg(sc->sc_dev, AR8327_REG_MODULE_EN, + AR8327_MODULE_EN_MIB, AR8327_MODULE_EN_MIB); + + return (0); +} + +/* + * Port setup. + */ +static void +ar8327_port_init(struct arswitch_softc *sc, int port) +{ + uint32_t t; + + /* XXX TODO: need to initialise port0/port6 status in pdata */ + +#if 0 + if (port == AR8216_PORT_CPU) + t = sc->chip_data.ar8327.port0_status; + else if (port == 6) + t = sc->chip_data.ar8327.port6_status; + else +#endif + /* XXX DB120 - hard-code port0 to 1000/full */ + if (port == 0) { + t = AR8X16_PORT_STS_SPEED_1000; + t |= AR8X16_PORT_STS_TXMAC | AR8X16_PORT_STS_RXMAC; + t |= AR8X16_PORT_STS_DUPLEX; + t |= AR8X16_PORT_STS_RXFLOW; + t |= AR8X16_PORT_STS_TXFLOW; + } else + t = AR8X16_PORT_STS_LINK_AUTO; + + arswitch_writereg(sc->sc_dev, AR8327_REG_PORT_STATUS(port), t); + arswitch_writereg(sc->sc_dev, AR8327_REG_PORT_HEADER(port), 0); + + t = 1 << AR8327_PORT_VLAN0_DEF_SVID_S; + t |= 1 << AR8327_PORT_VLAN0_DEF_CVID_S; + arswitch_writereg(sc->sc_dev, AR8327_REG_PORT_VLAN0(port), t); + + t = AR8327_PORT_VLAN1_OUT_MODE_UNTOUCH << AR8327_PORT_VLAN1_OUT_MODE_S; + arswitch_writereg(sc->sc_dev, AR8327_REG_PORT_VLAN1(port), t); + + t = AR8327_PORT_LOOKUP_LEARN; + t |= AR8X16_PORT_CTRL_STATE_FORWARD << AR8327_PORT_LOOKUP_STATE_S; + arswitch_writereg(sc->sc_dev, AR8327_REG_PORT_LOOKUP(port), t); +} + +static int +ar8327_port_vlan_setup(struct arswitch_softc *sc, etherswitch_port_t *p) +{ + + /* XXX stub for now */ + device_printf(sc->sc_dev, "%s: called\n", __func__); + return (0); +} + +static int +ar8327_port_vlan_get(struct arswitch_softc *sc, etherswitch_port_t *p) +{ + + /* XXX stub for now */ + device_printf(sc->sc_dev, "%s: called\n", __func__); + return (0); +} + +static void +ar8327_reset_vlans(struct arswitch_softc *sc) +{ + int i; + uint32_t mode, t; + + /* + * For now, let's default to one portgroup, just so traffic + * flows. All ports can see other ports. + */ + for (i = 0; i < AR8327_NUM_PORTS; i++) { + /* set pvid = i */ + t = i << AR8327_PORT_VLAN0_DEF_SVID_S; + t |= i << AR8327_PORT_VLAN0_DEF_CVID_S; + arswitch_writereg(sc->sc_dev, AR8327_REG_PORT_VLAN0(i), t); + + /* set egress == out_keep */ + mode = AR8327_PORT_VLAN1_OUT_MODE_UNTOUCH; + + t = AR8327_PORT_VLAN1_PORT_VLAN_PROP; + t |= mode << AR8327_PORT_VLAN1_OUT_MODE_S; + arswitch_writereg(sc->sc_dev, AR8327_REG_PORT_VLAN1(i), t); + + /* Set ingress = out_keep; members = 0x3f for all ports */ + + t = 0x3f; /* all ports */ + t |= AR8327_PORT_LOOKUP_LEARN; + + /* in_port_only, forward */ + t |= AR8X16_PORT_VLAN_MODE_PORT_ONLY << AR8327_PORT_LOOKUP_IN_MODE_S; + t |= AR8X16_PORT_CTRL_STATE_FORWARD << AR8327_PORT_LOOKUP_STATE_S; + arswitch_writereg(sc->sc_dev, AR8327_REG_PORT_LOOKUP(i), t); + } +} + +static int +ar8327_vlan_getvgroup(struct arswitch_softc *sc, etherswitch_vlangroup_t *vg) +{ + device_printf(sc->sc_dev, "%s: called\n", __func__); + return (0); +} + +static int +ar8327_vlan_setvgroup(struct arswitch_softc *sc, etherswitch_vlangroup_t *vg) +{ + + device_printf(sc->sc_dev, "%s: called\n", __func__); + return (0); +} + +static int +ar8327_get_pvid(struct arswitch_softc *sc, int port, int *pvid) +{ + + device_printf(sc->sc_dev, "%s: called\n", __func__); + return (0); +} + +static int +ar8327_set_pvid(struct arswitch_softc *sc, int port, int pvid) +{ + + device_printf(sc->sc_dev, "%s: called\n", __func__); + return (0); +} + +void +ar8327_attach(struct arswitch_softc *sc) +{ + + sc->hal.arswitch_hw_setup = ar8327_hw_setup; + sc->hal.arswitch_hw_global_setup = ar8327_hw_global_setup; + + sc->hal.arswitch_port_init = ar8327_port_init; + sc->hal.arswitch_port_vlan_setup = ar8327_port_vlan_setup; + sc->hal.arswitch_port_vlan_get = ar8327_port_vlan_get; + + sc->hal.arswitch_vlan_init_hw = ar8327_reset_vlans; + sc->hal.arswitch_vlan_getvgroup = ar8327_vlan_getvgroup; + sc->hal.arswitch_vlan_setvgroup = ar8327_vlan_setvgroup; + sc->hal.arswitch_vlan_get_pvid = ar8327_get_pvid; + sc->hal.arswitch_vlan_set_pvid = ar8327_set_pvid; + + /* Set the switch vlan capabilities. */ + sc->info.es_vlan_caps = ETHERSWITCH_VLAN_DOT1Q | + ETHERSWITCH_VLAN_PORT | ETHERSWITCH_VLAN_DOUBLE_TAG; + sc->info.es_nvlangroups = AR8X16_MAX_VLANS; +} Added: head/sys/dev/etherswitch/arswitch/arswitch_8327.h ============================================================================== --- /dev/null 00:00:00 1970 (empty, because file is newly added) +++ head/sys/dev/etherswitch/arswitch/arswitch_8327.h Mon Feb 24 04:47:16 2014 (r262430) @@ -0,0 +1,91 @@ +/*- + * Copyright (c) 2014 Adrian Chadd <adrian@FreeBSD.org> + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * + * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND + * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE + * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE + * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS + * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) + * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT + * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY + * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF + * SUCH DAMAGE. + * + * $FreeBSD$ + */ +#ifndef __ARSWITCH_8327_H__ +#define __ARSWITCH_8327_H__ + +enum ar8327_pad_mode { + AR8327_PAD_NC = 0, + AR8327_PAD_MAC2MAC_MII, + AR8327_PAD_MAC2MAC_GMII, + AR8327_PAD_MAC_SGMII, + AR8327_PAD_MAC2PHY_MII, + AR8327_PAD_MAC2PHY_GMII, + AR8327_PAD_MAC_RGMII, + AR8327_PAD_PHY_GMII, + AR8327_PAD_PHY_RGMII, + AR8327_PAD_PHY_MII, +}; + +enum ar8327_clk_delay_sel { + AR8327_CLK_DELAY_SEL0 = 0, + AR8327_CLK_DELAY_SEL1, + AR8327_CLK_DELAY_SEL2, + AR8327_CLK_DELAY_SEL3, +}; + +/* XXX update the field types */ +struct ar8327_pad_cfg { + uint32_t mode; + uint32_t rxclk_sel; + uint32_t txclk_sel; + uint32_t txclk_delay_sel; + uint32_t rxclk_delay_sel; + uint32_t txclk_delay_en; + uint32_t rxclk_delay_en; + uint32_t sgmii_delay_en; + uint32_t pipe_rxclk_sel; +}; + +struct ar8327_sgmii_cfg { + uint32_t sgmii_ctrl; + uint32_t serdes_aen; +}; + +struct ar8327_led_cfg { + uint32_t led_ctrl0; + uint32_t led_ctrl1; + uint32_t led_ctrl2; + uint32_t led_ctrl3; + uint32_t open_drain; +}; + +struct ar8327_port_cfg { +#define AR8327_PORT_SPEED_10 1 +#define AR8327_PORT_SPEED_100 2 +#define AR8327_PORT_SPEED_1000 3 + uint32_t speed; + uint32_t force_link; + uint32_t duplex; + uint32_t txpause; + uint32_t rxpause; +}; + +extern void ar8327_attach(struct arswitch_softc *sc); + +#endif /* __ARSWITCH_8327_H__ */ +
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?201402240447.s1O4lHO7017386>