Skip site navigation (1)Skip section navigation (2)
Date:      Mon, 14 Mar 2016 16:23:18 -0700
From:      "Chris H" <bsd-lists@bsdforge.com>
To:        <freebsd-current@freebsd.org>, "Robison, Dave" <david.robison@fisglobal.com>
Subject:   Re: LOR in r295717M
Message-ID:  <ec7c5eb731e79a0d789b638baee0464a@ultimatedns.net>
In-Reply-To: <6c09a4b03b5a0b3d524fd5b9550ea4b6@ultimatedns.net>
References:  <56E73826.7030308@fisglobal.com>, <6c09a4b03b5a0b3d524fd5b9550ea4b6@ultimatedns.net>

next in thread | previous in thread | raw e-mail | index | archive | help
On Mon, 14 Mar 2016 16:13:22 -0700 "Chris H" <bsd-lists@bsdforge.com> wrote

> On Mon, 14 Mar 2016 15:16:06 -0700 "Robison, Dave"
> <david.robison@fisglobal.com> wrote
> 
> > Hope this is the right place to take this. I can provide more info as
> > requested. 
> Hello, Dave.
> I reported nearly identical LOR's last week, and was
> told they're, ahem... "normal" see; harmless.
> My suggestion; rebuild your kernel, and remove WITNESS from
> your KERNCONF.
That is; remove WITNESS from your KERNCONF, before doing so
(rebuilding your kernel) -- in case there was any question. ;)
> 
> --Chris
> 
> >
> > 
> > 
> > lock order reversal:
> >  1st 0xfffffe03e1823700 bufwait (bufwait) @
> >  /usr/src/sys/kern/vfs_bio.c:3488 2nd 0xfffff80005286200 dirhash (dirhash)
> >  @ > /usr/src/sys/ufs/ufs/ufs_dirhash.c:281 stack backtrace:
> > #0 0xffffffff80a7fc60 at witness_debugger+0x70
> > #1 0xffffffff80a7fb61 at witness_checkorder+0xe71
> > #2 0xffffffff80a2d152 at _sx_xlock+0x72
> > #3 0xffffffff80cc562d at ufsdirhash_add+0x3d
> > #4 0xffffffff80cc84df at ufs_direnter+0x62f
> > #5 0xffffffff80cd1843 at ufs_makeinode+0x5f3
> > #6 0xffffffff80ccd3ed at ufs_create+0x2d
> > #7 0xffffffff80fbb561 at VOP_CREATE_APV+0xf1
> > #8 0xffffffff80ae6a18 at vn_open_cred+0x2f8
> > #9 0xffffffff80adfd9c at kern_openat+0x25c
> > #10 0xffffffff80e6f15b at amd64_syscall+0x2db
> > #11 0xffffffff80e4ed5b at Xfast_syscall+0xfb
> > 
> > 
> > lock order reversal:
> >  1st 0xfffff80021da2d50 ufs (ufs) @ /usr/src/sys/kern/vfs_syscalls.c:3400
> >  2nd 0xfffffe03e1823700 bufwait (bufwait) @
> > /usr/src/sys/ufs/ffs/ffs_vnops.c:263  3rd 0xfffff80025d1ed50 ufs (ufs) @
> > /usr/src/sys/kern/vfs_subr.c:2476 stack backtrace:
> > #0 0xffffffff80a7fc60 at witness_debugger+0x70
> > #1 0xffffffff80a7fb61 at witness_checkorder+0xe71
> > #2 0xffffffff809ff22b at __lockmgr_args+0xd3b
> > #3 0xffffffff80cc06b6 at ffs_lock+0xa6
> > #4 0xffffffff80fbdb00 at VOP_LOCK1_APV+0x100
> > #5 0xffffffff80ae71ba at _vn_lock+0x9a
> > #6 0xffffffff80ad7783 at vget+0x63
> > #7 0xffffffff80aca08c at vfs_hash_get+0xcc
> > #8 0xffffffff80cbbda0 at ffs_vgetf+0x40
> > #9 0xffffffff80cb3731 at softdep_sync_buf+0xad1
> > #10 0xffffffff80cc1296 at ffs_syncvnode+0x256
> > #11 0xffffffff80cc0550 at ffs_fsync+0x20
> > #12 0xffffffff80fbcbc7 at VOP_FSYNC_APV+0xf7
> > #13 0xffffffff80ae3e30 at sys_fsync+0x170
> > #14 0xffffffff80e6f15b at amd64_syscall+0x2db
> > #15 0xffffffff80e4ed5b at Xfast_syscall+0xfb
> > 
> > 
> > dmesg info:
> > 
> > daver@hvm1a:~ % cat /var/run/dmesg.boot
> > Copyright (c) 1992-2016 The FreeBSD Project.
> > Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
> >         The Regents of the University of California. All rights reserved.
> > FreeBSD is a registered trademark of The FreeBSD Foundation.
> > FreeBSD 11.0-CURRENT #0 r295717M: Mon Feb 22 12:24:00 PST 2016
> >     root@hvm1a.dev.vicor.com:/usr/obj/usr/src/sys/GENERIC amd64
> > FreeBSD clang version 3.7.1 (tags/RELEASE_371/final 255217) 20151225
> > WARNING: WITNESS option enabled, expect reduced performance.
> > VT(vga): resolution 640x480
> > CPU: Intel(R) Xeon(R) CPU            5150  @ 2.66GHz (2660.06-MHz K8-class
> > CPU)   Origin="GenuineIntel"  Id=0x6f6  Family=0x6  Model=0xf  Stepping=6
> >  
> >
> >
Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,
> > CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>  
> >
> >
Features2=0x4e3bd<SSE3,DTES64,MON,DS_CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,DCA
> > >   AMD Features=0x20100800<SYSCALL,NX,LM>
> >   AMD Features2=0x1<LAHF>
> >   VT-x: (disabled in BIOS) HLT,PAUSE
> >   TSC: P-state invariant, performance statistics
> > real memory  = 17179869184 (16384 MB)
> > avail memory = 16553672704 (15786 MB)
> > Event timer "LAPIC" quality 400
> > ACPI APIC Table: <INTEL  S5000PAL>
> > FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs
> > FreeBSD/SMP: 1 package(s) x 2 core(s)
> >  cpu0 (BSP): APIC ID:  0
> >  cpu1 (AP): APIC ID:  1
> > random: unblocking device.
> > ioapic0 <Version 2.0> irqs 0-23 on motherboard
> > ioapic1 <Version 2.0> irqs 24-47 on motherboard
> > random: entropy device external interface
> > kbd1 at kbdmux0
> > netmap: loaded module
> > module_register_init: MOD_LOAD (vesa, 0xffffffff80ee2ef0, 0) error 19
> > vtvga0: <VT VGA driver> on motherboard
> > cryptosoft0: <software crypto> on motherboard
> > acpi0: <INTEL S5000PAL> on motherboard
> > acpi0: Power Button (fixed)
> > cpu0: <ACPI CPU> on acpi0
> > cpu1: <ACPI CPU> on acpi0
> > atrtc0: <AT realtime clock> port 0x70-0x71,0x74-0x77 irq 8 on acpi0
> > Event timer "RTC" frequency 32768 Hz quality 0
> > attimer0: <AT timer> port 0x40-0x43,0x50-0x53 irq 0 on acpi0
> > Timecounter "i8254" frequency 1193182 Hz quality 0
> > Event timer "i8254" frequency 1193182 Hz quality 100
> > hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0
> > Timecounter "HPET" frequency 14318180 Hz quality 950
> > Event timer "HPET" frequency 14318180 Hz quality 450
> > Event timer "HPET1" frequency 14318180 Hz quality 440
> > Event timer "HPET2" frequency 14318180 Hz quality 440
> > Timecounter "ACPI-fast" frequency 3579545 Hz quality 900
> > acpi_timer0: <24-bit timer at 3.579545MHz> port 0x408-0x40b on acpi0
> > acpi_button0: <Power Button> on acpi0
> > pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
> > pci0: <ACPI PCI bus> on pcib0
> > pcib1: <ACPI PCI-PCI bridge> at device 2.0 on pci0
> > pci1: <ACPI PCI bus> on pcib1
> > pcib2: <ACPI PCI-PCI bridge> irq 16 at device 0.0 on pci1
> > pci2: <ACPI PCI bus> on pcib2
> > pcib3: <ACPI PCI-PCI bridge> irq 16 at device 0.0 on pci2
> > pci3: <ACPI PCI bus> on pcib3
> > pcib4: <ACPI PCI-PCI bridge> at device 0.0 on pci3
> > pci4: <ACPI PCI bus> on pcib4
> > mfi0: <LSI MegaSAS 1064R> mem 0xb8b00000-0xb8b0ffff,0xb8900000-0xb891ffff
> > irq 18 at device 14.0 on pci4 mfi0: Using MSI
> > mfi0: Megaraid SAS driver Ver 4.23 
> > mfi0: FW MaxCmds = 1008, limiting to 128
> > pcib5: <PCI-PCI bridge> at device 0.2 on pci3
> > pci5: <PCI bus> on pcib5
> > pcib6: <ACPI PCI-PCI bridge> irq 16 at device 1.0 on pci2
> > pci6: <ACPI PCI bus> on pcib6
> > pcib7: <ACPI PCI-PCI bridge> irq 16 at device 2.0 on pci2
> > pci7: <ACPI PCI bus> on pcib7
> > em0: <Intel(R) PRO/1000 Network Connection 7.6.1-k> port 0x3020-0x303f mem
> > 0xb8820000-0xb883ffff,0xb8400000-0xb87fffff irq 18 at device 0.0 on pci7
> > em0: Using an MSI interrupt
> > em0: Ethernet address: 00:15:17:db:55:98
> > em0: netmap queues/slots: TX 1/1024, RX 1/1024
> > em1: <Intel(R) PRO/1000 Network Connection 7.6.1-k> port 0x3000-0x301f mem
> > 0xb8800000-0xb881ffff,0xb8000000-0xb83fffff irq 19 at device 0.1 on pci7
> > em1: Using an MSI interrupt
> > em1: Ethernet address: 00:15:17:db:55:99
> > em1: netmap queues/slots: TX 1/1024, RX 1/1024
> > pcib8: <ACPI PCI-PCI bridge> at device 0.3 on pci1
> > pci8: <ACPI PCI bus> on pcib8
> > pcib9: <PCI-PCI bridge> at device 3.0 on pci0
> > pci9: <PCI bus> on pcib9
> > pcib10: <ACPI PCI-PCI bridge> at device 4.0 on pci0
> > pci10: <ACPI PCI bus> on pcib10
> > pcib11: <ACPI PCI-PCI bridge> at device 5.0 on pci0
> > pci11: <ACPI PCI bus> on pcib11
> > mps0: <Avago Technologies (LSI) SAS2308> port 0x2000-0x20ff mem
> > 0xb8d40000-0xb8d4ffff,0xb8d00000-0xb8d3ffff irq 18 at device 0.0 on pci11
> > mps0: Firmware: 20.00.02.00, Driver: 20.00.00.00-fbsd
> > mps0: IOCCapabilities:
> > 5285c<ScsiTaskFull,DiagTrace,SnapBuf,EEDP,TransRetry,EventReplay,HostDisc>
> > pcib12: <ACPI PCI-PCI bridge> at device 6.0 on pci0
> > pci12: <ACPI PCI bus> on pcib12
> > pcib13: <ACPI PCI-PCI bridge> at device 7.0 on pci0
> > pci13: <ACPI PCI bus> on pcib13
> > uhci0: <Intel 631XESB/632XESB/3100 USB controller USB-1> port 0x4080-0x409f
> > irq 23 at device 29.0 on pci0 uhci0: LegSup = 0x2f00
> > usbus0 on uhci0
> > uhci1: <Intel 631XESB/632XESB/3100 USB controller USB-2> port 0x4060-0x407f
> > irq 22 at device 29.1 on pci0 uhci1: LegSup = 0x2f00
> > usbus1 on uhci1
> > uhci2: <Intel 631XESB/632XESB/3100 USB controller USB-3> port 0x4040-0x405f
> > irq 23 at device 29.2 on pci0 uhci2: LegSup = 0x2f00
> > usbus2 on uhci2
> > uhci3: <Intel 631XESB/632XESB/3100 USB controller USB-4> port 0x4020-0x403f
> > irq 22 at device 29.3 on pci0 uhci3: LegSup = 0x2f00
> > usbus3 on uhci3
> > ehci0: <Intel 63XXESB USB 2.0 controller> mem 0xb8e00400-0xb8e007ff irq 23
> > at device 29.7 on pci0 usbus4: EHCI version 1.0
> > usbus4 on ehci0
> > pcib14: <ACPI PCI-PCI bridge> at device 30.0 on pci0
> > pci14: <ACPI PCI bus> on pcib14
> > vgapci0: <VGA-compatible display> port 0x1000-0x10ff mem
> > 0xb0000000-0xb7ffffff,0xb8c00000-0xb8c0ffff irq 17 at device 12.0 on pci14
> > vgapci0: Boot video device
> > isab0: <PCI-ISA bridge> at device 31.0 on pci0
> > isa0: <ISA bus> on isab0
> > atapci0: <Intel 63XXESB2 UDMA100 controller> port
> > 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0x40b0-0x40bf irq 20 at device 31.1 on
> > pci0 ata0: <ATA channel> at channel 0 on atapci0
> > atapci1: <Intel 63XXESB2 SATA300 controller> port
> > 0x40c8-0x40cf,0x40e4-0x40e7,0x40c0-0x40c7,0x40e0-0x40e3,0x40a0-0x40af mem
> > 0xb8e00000-0xb8e003ff irq 20 at device 31.2 on pci0 ata2: <ATA channel> at
> > channel 0 on atapci1 ata3: <ATA channel> at channel 1 on atapci1
> > uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
> > uart1: <16550 or compatible> port 0x2f8-0x2ff irq 3 on acpi0
> > atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
> > atkbd0: <AT Keyboard> irq 1 on atkbdc0
> > kbd0 at atkbd0
> > atkbd0: [GIANT-LOCKED]
> > orm0: <ISA Option ROMs> at iomem
> > 0xc0000-0xc8fff,0xce800-0xcf7ff,0xcf800-0xd07ff,0xd0800-0xd67ff on isa0
> > ppc0: cannot reserve I/O port range
> > est0: <Enhanced SpeedStep Frequency Control> on cpu0
> > est1: <Enhanced SpeedStep Frequency Control> on cpu1
> > mfi0: 19700 (509494462s/0x0020/info) - Shutdown command received from host
> > mfi0: 19701 (boot + 0s/0x0020/info) - Firmware initialization started (PCI
> > ID 0411/1000/3501/8086) mfi0: 19702 (boot + 0s/0x0020/info) - Firmware
> > version 1.12.280-0826 mfi0: 19703 (boot + 23s/0x0008/info) - Battery
> > temperature is normal mfi0: 19704 (boot + 23s/0x0008/info) - Battery
> > Present mfi0: 19705 (boot + 24s/0x0020/info) - Board Revision 
> > mfi0: 19706 (boot + 53s/0x0004/info) - Enclosure (SES) discovered on PD
> > 07(c None/p1) mfi0: 19707 (boot + 53s/0x0002/info) - Inserted: Encl PD 07
> > mfi0: MFI_DCMD_PD_LIST_QUERY failed 2
> > mfi0: 19708 (boot + 53s/0x0002/info) - Inserted: PD 07(c None/p1) Info:
> > enclPd=07, scsiType=d, portMap=09,
> > sasAddr=5000007000580000,0000000000000000 mfi0: 19709 (boot +
> > 53s/0x0002/info) - Inserted: PD 1c(e0x07/s0) mfi0: MFI_DCMD_PD_LIST_QUERY
> > failed 2 mfi0: 19710 (boot + 53s/0x0002/info) - Inserted: PD 1c(e0x07/s0)
> > Info: enclPd=07, scsiType=0, portMap=00,
> > sasAddr=83945143a499a876,0000000000000000 mfi0: 19711 (boot +
> > 53s/0x0002/info) - Inserted: PD 1d(e0x07/s1) mfi0: MFI_DCMD_PD_LIST_QUERY
> > failed 2 mfi0: 19712 (boot + 53s/0x0002/info) - Inserted: PD 1d(e0x07/s1)
> > Info: enclPd=07, scsiType=0, portMap=01,
> > sasAddr=839544489e9aad93,0000000000000000 mfi0: 19713 (boot +
> > 53s/0x0002/info) - Inserted: PD 1e(e0x07/s2) mfi0: MFI_DCMD_PD_LIST_QUERY
> > failed 2 mfi0: 19714 (boot + 53s/0x0002/info) - Inserted: PD 1e(e0x07/s2)
> > Info: enclPd=07, scsiType=0, portMap=02,
> > sasAddr=83985540c098cb92,0000000000000000 mfi0: 19715 (boot +
> > 53s/0x0002/info) - Inserted: PD 1f(e0x07/s3) mfi0: MFI_DCMD_PD_LIST_QUERY
> > failed 2 mfi0: 19716 (boot + 53s/0x0002/info) - Inserted: PD 1f(e0x07/s3)
> > Info: enclPd=07, scsiType=0, portMap=03,
> > sasAddr=8394473ac3acd095,0000000000000000 mfi0: 19717
> > (509496114s/0x0020/info) - Time established as 02/22/16 22:41:54; (55
> > seconds since power on) usbus0: 12Mbps Full Speed USB v1.0 Timecounters
> > tick every 1.000 msec IPsec: Initialized Security Association Processing.
> > usbus1: 12Mbps Full Speed USB v1.0
> > usbus2: 12Mbps Full Speed USB v1.0
> > ugen0.1: <Intel> at usbus0
> > ugen1.1: <Intel> at usbus1
> > uhub0: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus0
> > uhub1: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus1
> > ugen2.1: <Intel> at usbus2
> > uhub2: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus2
> > usbus3: 12Mbps Full Speed USB v1.0
> > usbus4: 480Mbps High Speed USB v2.0
> > ugen3.1: <Intel> at usbus3
> > ugen4.1: <Intel> at usbus4
> > uhub3: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus3
> > uhub4: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus4
> > mfid0 on mfi0
> > mfid0: 952720MB (1951170560 sectors) RAID volume (no label) is optimal
> > uhub0: 2 ports with 2 removable, self powered
> > uhub1: 2 ports with 2 removable, self powered
> > uhub2: 2 ports with 2 removable, self powered
> > mfid1 on mfi0
> > mfid1: 952720MB (1951170560 sectors) RAID volume (no label) is optimal
> > mps0: SAS Address for SATA device = 83ae5139c8babb8a
> > uhub3: 2 ports with 2 removable, self powered
> > mps0: SAS Address for SATA device = 83ac5340bec1a876
> > mps0: SAS Address for SATA device = 83984f3cc698c081
> > mps0: SAS Address for SATA device = 83b43946b6a1cc77
> > mps0: SAS Address for SATA device = 83984b3ab4b2cd83
> > mps0: SAS Address for SATA device = 839a5843b3baaf75
> > mps0: SAS Address for SATA device = 839a4733c7add186
> > mps0: SAS Address for SATA device = 83a95744a5b4c696
> > mps0: SAS Address for SATA device = 7e9735279fa59487
> > mps0: SAS Address for SATA device = 7e973622a2a7958c
> > mps0: SAS Address from SATA device = 83ae5139c8babb8a
> > mps0: SAS Address from SATA device = 83ac5340bec1a876
> > mps0: SAS Address from SATA device = 83984f3cc698c081
> > mps0: SAS Address from SATA device = 83b43946b6a1cc77
> > mps0: SAS Address from SATA device = 83984b3ab4b2cd83
> > mps0: SAS Address from SATA device = 839a5843b3baaf75
> > mps0: SAS Address from SATA device = 839a4733c7add186
> > mps0: SAS Address from SATA device = 83a95744a5b4c696
> > mps0: SAS Address from SATA device = 7e9735279fa59487
> > mps0: SAS Address from SATA device = 7e973622a2a7958c
> > mps0: SAS Address for SATA device = 7e9737209fa99788
> > mps0: SAS Address for SATA device = 7e973321a7ad958c
> > mps0: SAS Address from SATA device = 7e9737209fa99788
> > mps0: SAS Address from SATA device = 7e973321a7ad958c
> > ses0 at mps0 bus 0 scbus0 target 20 lun 0
> > ses0: <LSI SAS2X28 0e12> Fixed Enclosure Services SPC-3 SCSI device
> > ses0: Serial Number 
> > ses0: 600.000MB/s transfers
> > ses0: Command Queueing enabled
> > ses0: SCSI-3 ENC Device
> > ses1 at mps0 bus 0 scbus0 target 21 lun 0
> > ses1: <LSI SAS2X28 0e12> Fixed Enclosure Services SPC-3 SCSI device
> > ses1: Serial Number 
> > ses1: 600.000MB/s transfers
> > ses1: Command Queueing enabled
> > ses1: SCSI-3 ENC Device
> > da0 at mps0 bus 0 scbus0 target 8 lun 0
> > da0: <ATA WDC WD1003FZEX-0 1A01> Fixed Direct Access SPC-4 SCSI device
> > da0: Serial Number      WD-WCC3FJNKZRCJ
> > da0: 600.000MB/s transfers
> > da0: Command Queueing enabled
> > da0: 953869MB (1953525168 512 byte sectors)
> > da1 at mps0 bus 0 scbus0 target 9 lun 0
> > da1: <ATA WDC WD1003FZEX-0 1A01> Fixed Direct Access SPC-4 SCSI device
> > da1: Serial Number      WD-WCC3FHPRPY06
> > da1: 600.000MB/s transfers
> > da1: Command Queueing enabled
> > da1: 953869MB (1953525168 512 byte sectors)
> > da2 at mps0 bus 0 scbus0 target 10 lun 0
> > da2: <ATA WDC WD1003FZEX-0 1A01> Fixed Direct Access SPC-4 SCSI device
> > da2: Serial Number      WD-WCC3F4LNX0HA
> > da2: 600.000MB/s transfers
> > da2: Command Queueing enabled
> > da2: 953869MB (1953525168 512 byte sectors)
> > da3 at mps0 bus 0 scbus0 target 11 lun 0
> > da3: <ATA WDC WD1003FZEX-0 1A01> Fixed Direct Access SPC-4 SCSI device
> > da3: Serial Number      WD-WCC3FP6XH9T7
> > da3: 600.000MB/s transfers
> > da3: Command Queueing enabled
> > da3: 953869MB (1953525168 512 byte sectors)
> > da4 at mps0 bus 0 scbus0 target 12 lun 0
> > da4: <ATA WDC WD1003FZEX-0 1A01> Fixed Direct Access SPC-4 SCSI device
> > da4: Serial Number      WD-WCC3F4HLFJUC
> > da4: 600.000MB/s transfers
> > da4: Command Queueing enabled
> > da4: 953869MB (1953525168 512 byte sectors)
> > da5 at mps0 bus 0 scbus0 target 13 lun 0
> > da5: <ATA WDC WD1003FZEX-0 1A01> Fixed Direct Access SPC-4 SCSI device
> > da5: Serial Number      WD-WCC3F6UUER75
> > da5: 600.000MB/s transfers
> > da5: Command Queueing enabled
> > da5: 953869MB (1953525168 512 byte sectors)
> > da6 at mps0 bus 0 scbus0 target 14 lun 0
> > da6: <ATA WDC WD1003FZEX-0 1A01> Fixed Direct Access SPC-4 SCSI device
> > da6: Serial Number      WD-WCC3F6DEYEYF
> > da6: 600.000MB/s transfers
> > da6: Command Queueing enabled
> > da6: 953869MB (1953525168 512 byte sectors)
> > da7 at mps0 bus 0 scbus0 target 15 lun 0
> > da7: <ATA WDC WD1003FZEX-0 1A01> Fixed Direct Access SPC-4 SCSI device
> > da7: Serial Number      WD-WCC3FETV7LNV
> > da7: 600.000MB/s transfers
> > da7: Command Queueing enabled
> > da7: 953869MB (1953525168 512 byte sectors)
> > da9 at mps0 bus 0 scbus0 target 17 lun 0
> > da9: <ATA WDC WD1002FAEX-0 1D05> Fixed Direct Access SPC-4 SCSI device
> > da9: Serial Number      WD-WCATRC344375
> > da9: 600.000MB/s transfers
> > da9: Command Queueing enabled
> > da9: 953869MB (1953525168 512 byte sectors)
> > da8 at mps0 bus 0 scbus0 target 16 lun 0
> > ses0: da0,pass0: Element descriptor: 'Slot 01'
> > da8: <ATA WDC WD1002FAEX-0 1D05> Fixed Direct Access SPC-4 SCSI device
> > ses0: da0,pass0: SAS Device Slot Element: 1 Phys at Slot 0
> > da8: Serial Number      WD-WCATRC291160
> > ses0:  phy 0: SATA device
> > da8: 600.000MB/s transfersses0:  phy 0: parent 5003048001a23a3f addr
> > 5003048001a23a2c 
> >
> > da8: Command Queueing enabled
> > da8: 953869MB (1953525168 512 byte sectors)
> > da10 at mps0 bus 0 scbus0 target 18 lun 0
> > da10: <ATA WDC WD1002FAEX-0 1D05> Fixed Direct Access SPC-4 SCSI device
> > da10: Serial Number      WD-WCATRC421591
> > da10: 600.000MB/s transfers
> > da10: Command Queueing enabled
> > da10: 953869MB (1953525168 512 byte sectors)
> > da11 at mps0 bus 0 scbus0 target 19 lun 0
> > da11: <ATA WDC WD1002FAEX-0 1D05> Fixed Direct Access SPC-4 SCSI device
> > da11: Serial Number      WD-WCATRC039975
> > da11: 600.000MB/s transfers
> > da11: Command Queueing enabled
> > da11: 953869MB (1953525168 512 byte sectors)
> > ses0: da1,pass1: Element descriptor: 'Slot 02'
> > ses0: da1,pass1: SAS Device Slot Element: 1 Phys at Slot 1
> > ses0:  phy 0: SATA device
> > ses0:  phy 0: parent 5003048001a23a3f addr 5003048001a23a2d
> > ses0: da2,pass2: Element descriptor: 'Slot 03'
> > ses0: da2,pass2: SAS Device Slot Element: 1 Phys at Slot 2
> > ses0:  phy 0: SATA device
> > ses0:  phy 0: parent 5003048001a23a3f addr 5003048001a23a2e
> > ses0: da3: Element descriptor: 'Slot 04'
> > ses0: da3: SAS Device Slot Element: 1 Phys at Slot 3
> > ses0:  phy 0: SATA device
> > ses0:  phy 0: parent 5003048001a23a3f addr 5003048001a23a2f
> > ses0: da4: Element descriptor: 'Slot 05'
> > ses0: da4: SAS Device Slot Element: 1 Phys at Slot 4
> > ses0:  phy 0: SATA device
> > ses0:  phy 0: parent 5003048001a23a3f addr 5003048001a23a30
> > ses0: da5: Element descriptor: 'Slot 06'
> > ses0: da5: SAS Device Slot Element: 1 Phys at Slot 5
> > ses0:  phy 0: SATA device
> > ses0:  phy 0: parent 5003048001a23a3f addr 5003048001a23a31
> > ses0: da6: Element descriptor: 'Slot 07'
> > ses0: da6: SAS Device Slot Element: 1 Phys at Slot 6
> > ses0:  phy 0: SATA device
> > ses0:  phy 0: parent 5003048001a23a3f addr 5003048001a23a32
> > ses0: da7: Element descriptor: 'Slot 08'
> > ses0: da7: SAS Device Slot Element: 1 Phys at Slot 7
> > ses0:  phy 0: SATA device
> > ses0:  phy 0: parent 5003048001a23a3f addr 5003048001a23a33
> > ses0: da8: Element descriptor: 'Slot 09'
> > ses0: da8: SAS Device Slot Element: 1 Phys at Slot 8
> > ses0:  phy 0: SATA device
> > ses0:  phy 0: parent 5003048001a23a3f addr 5003048001a23a34
> > ses0: da9: Element descriptor: 'Slot 10'
> > ses0: da9: SAS Device Slot Element: 1 Phys at Slot 9
> > ses0:  phy 0: SATA device
> > ses0:  phy 0: parent 5003048001a23a3f addr 5003048001a23a35
> > ses0: da10: Element descriptor: 'Slot 11'
> > ses0: da10: SAS Device Slot Element: 1 Phys at Slot 10
> > ses0:  phy 0: SATA device
> > ses0:  phy 0: parent 5003048001a23a3f addr 5003048001a23a36
> > ses0: da11: Element descriptor: 'Slot 12'
> > ses0: da11: SAS Device Slot Element: 1 Phys at Slot 11
> > ses0:  phy 0: SATA device
> > ses0:  phy 0: parent 5003048001a23a3f addr 5003048001a23a37
> > cd0 at ata0 bus 0 scbus1 target 1 lun 0
> > cd0: <MATSHITA DVD-ROM UJDA780 1.50> Removable CD-ROM SCSI device
> > cd0: 33.300MB/s transfers (UDMA2, ATAPI 12bytes, PIO 65534bytes)
> > cd0: Attempt to query device size failed: NOT READY, Medium not present -
> > tray closed SMP: AP CPU #1 Launched!
> > Timecounter "TSC-low" frequency 1330028520 Hz quality 1000
> > WARNING: WITNESS option enabled, expect reduced performance.
> > Trying to mount root from ufs:/dev/mfid0p2 [rw]...
> > ZFS filesystem version: 5
> > ZFS storage pool version: features support (5000)
> > uhub4: 8 ports with 8 removable, self powered
> > ugen2.2: <No brand> at usbus2
> > ukbd0: <No brand KVM, class 0/0, rev 1.10/0.00, addr 2> on usbus2
> > kbd2 at ukbd0
> > ugen4.2: <IntelR> at usbus4
> > umass0: <IntelR Multidevice, class 0/0, rev 2.00/0.01, addr 2> on usbus4
> > umass0:  SCSI over Bulk-Only; quirks = 0x0100
> > umass0:4:0: Attached to scbus4
> > umass1: <IntelR Multidevice, class 0/0, rev 2.00/0.01, addr 2> on usbus4
> > umass1:  SCSI over Bulk-Only; quirks = 0x0100
> > umass1:5:1: Attached to scbus5
> > umass2: <IntelR Multidevice, class 0/0, rev 2.00/0.01, addr 2> on usbus4
> > umass2:  SCSI over Bulk-Only; quirks = 0x0100
> > umass2:6:2: Attached to scbus6
> > umass3: <IntelR Multidevice, class 0/0, rev 2.00/0.01, addr 2> on usbus4
> > umass3:  SCSI over Bulk-Only; quirks = 0x0100
> > umass3:7:3: Attached to scbus7
> > ukbd1: <IntelR Multidevice, class 0/0, rev 2.00/0.01, addr 2> on usbus4
> > kbd3 at ukbd1
> > cd1 at umass-sim2 bus 2 scbus6 target 0 lun 0
> > cd1: <Intel(R) RMM2 VDrive 3 0.01> Removable CD-ROM SCSI-3 device
> > cd1: Serial Number 731284497BE433D913F08AD68B5E9D71
> > cd1: 40.000MB/s transfers
> > cd1: Attempt to query device size failed: NOT READY, Medium not present
> > cd1: quirks=0x10<10_BYTE_ONLY>
> > cd2 at umass-sim3 bus 3 scbus7 target 0 lun 0
> > cd2: <Intel(R) RMM2 VDrive 4 0.01> Removable CD-ROM SCSI-3 device
> > cd2: Serial Number 731284497BE433D913F08AD68B5E9D71
> > cd2: 40.000MB/s transfers
> > cd2: Attempt to query device size failed: NOT READY, Medium not present
> > cd2: quirks=0x10<10_BYTE_ONLY>
> > cd3 at umass-sim0 bus 0 scbus4 target 0 lun 0
> > cd3: <Intel(R) RMM2 VDrive 1 0.01> Removable CD-ROM SCSI-3 device
> > cd3: Serial Number 731284497BE433D913F08AD68B5E9D71
> > cd3: 40.000MB/s transfers
> > cd3: Attempt to query device size failed: NOT READY, Medium not present
> > cd3: quirks=0x10<10_BYTE_ONLY>
> > cd4 at umass-sim1 bus 1 scbus5 target 0 lun 0
> > cd4: <Intel(R) RMM2 VDrive 2 0.01> Removable CD-ROM SCSI-3 device
> > cd4: Serial Number 731284497BE433D913F08AD68B5E9D71
> > cd4: 40.000MB/s transfers
> > cd4: Attempt to query device size failed: NOT READY, Medium not present
> > cd4: quirks=0x10<10_BYTE_ONLY>
> > em0: link state changed to UP
> > uhid0: <IntelR Multidevice, class 0/0, rev 2.00/0.01, addr 2> on usbus4
> > ums0: <No brand KVM, class 0/0, rev 1.10/0.00, addr 2> on usbus2
> > ums0: 5 buttons and [XYZ] coordinates ID=1
> > 
> > 
> > 
> > 
> > 
> > -- 
> > Dave Robison





Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?ec7c5eb731e79a0d789b638baee0464a>