Date: Fri, 26 Jan 2001 04:35:22 -0800 (PST) From: Benjamin Ossei <ben@cahostnet.net> To: "Doug Young" <dougy@bryden.apana.org.au>, questions@FreeBSD.ORG Subject: Re: New Kernel install Message-ID: <20010126123523.068D52750@sitemail.everyone.net>
next in thread | raw e-mail | index | archive | help
Do you think there's a bug in the software? --- "Doug Young" <dougy@bryden.apana.org.au> > wrote: >I tried the kernel compile in 4.2 earlier today & got similar response .... >looks like >some "feature" there that needs attention > >----- Original Message ----- >From: "Benjamin Ossei" <ben@cahostnet.net> >To: <questions@FreeBSD.ORG> >Sent: Friday, January 26, 2001 10:23 PM >Subject: New Kernel install > > >Hi, > >I'm trying to compile a new kernel for my machine. I used the GENERIC >configuration as a starting point and added what I needed and commented out >what I didn't want. I was able to issue the command /usr/sbin/config -g >"newkernel" fine but when I go to build the kernel with the make depend or >just make I get a stop error. The error indicates that there's unterminited >string or something to the effect and gives me this "#IF" for the problem. >I've gone through my kernel config and can not see anything. I'm not very >good at this I should also say. > >I'm using Freebsd 4.2-Current. This is my first custom kernel. I've >attached the file for your viewing and hopefully you can see my problem. I >included the options IPFIREWALL_DEFAULT_TO_ACCEPT for now to get the machine >up and running. I'll change this to DENY once I"m done and recompile the >kernel. > >Thanks for your help. > > > >_____________________________________________________________ >========GET YOUR FREE E-MAIL============ >http://freemail.cahostnet.net >Web Hosting http://www.cahostnet.com > > > >---------------------------------------------------------------------------- >---- > > >> # >> # GENERIC -- Generic kernel configuration file for FreeBSD/i386 >> # >> # For more information on this file, please read the handbook section on >> # Kernel Configuration Files: >> # >> # http://www.FreeBSD.org/handbook/kernelconfig-config.html >> # >> # The handbook is also available locally in /usr/share/doc/handbook >> # if you've installed the doc distribution, otherwise always see the >> # FreeBSD World Wide Web server (http://www.FreeBSD.org/) for the >> # latest information. >> # >> # An exhaustive list of options and more detailed explanations of the >> # device lines is also present in the ./LINT configuration file. If you >are >> # in doubt as to the purpose or necessity of a line, check first in LINT. >> # >> # $FreeBSD: src/sys/i386/conf/FWKERNEL,v 1 2001/01/25 22:45 Ben Ossei Exp >$ >> >> machine i386 >> cpu I386_CPU >> cpu I486_CPU >> cpu I586_CPU >> cpu I686_CPU >> ident FWKERNEL >> maxusers 64 >> >> # makeoptions DEBUG=-g #Build kernel with gdb(1) debug symbols >> >> # options MATH_EMULATE #Support for x87 emulation >> options INET #InterNETworking >> options INET6 #IPv6 communications protocols >> options FFS #Berkeley Fast Filesystem >> options FFS_ROOT #FFS usable as root device [keep this!] >> options SOFTUPDATES #Enable FFS soft updates support >> options MFS #Memory Filesystem >> options MD_ROOT #MD is a potential root device >> # options NFS #Network Filesystem >> # options NFS_ROOT #NFS usable as root device, NFS required >> # options MSDOSFS #MSDOS Filesystem >> options CD9660 #ISO 9660 Filesystem >> options CD9660_ROOT #CD-ROM usable as root, CD9660 required >> options PROCFS #Process filesystem >> options COMPAT_43 #Compatible with BSD 4.3 [KEEP THIS!] >> options SCSI_DELAY=15000 #Delay (in ms) before probing SCSI >> # options UCONSOLE #Allow users to grab the console >> options USERCONFIG #boot -c editor >> options VISUAL_USERCONFIG #visual boot -c editor >> options KTRACE #ktrace(1) support >> options SYSVSHM #SYSV-style shared memory >> options SYSVMSG #SYSV-style message queues >> options SYSVSEM #SYSV-style semaphores >> options P1003_1B #Posix P1003_1B real-time extensions >> options _KPOSIX_PRIORITY_SCHEDULING >> options ICMP_BANDLIM #Rate limit bad replies >> options KBD_INSTALL_CDEV #install a CDEV entry in /dev >> options IPFIREWALL >> options IPFIREWALL_VERBOSE >> options IPDIVERT >> options IPFIREWALL_DEFAULT_TO_ACCEPT >> options IPFIREWALL_VERBOSE_LIMIT=100 >> options IPFILTER >> options IPFILTER_LOG >> >> # To make an SMP kernel, the next two are needed >> options SMP # Symmetric MultiProcessor Kernel >> options APIC_IO # Symmetric (APIC) I/O >> >> device isa >> device eisa >> device pci >> >> # Floppy drives >> device fdc0 at isa? port IO_FD1 irq 6 drq 2 >> device fd0 at fdc0 drive 0 >> # device fd1 at fdc0 drive 1 >> >> # ATA and ATAPI devices >> device ata0 at isa? port IO_WD1 irq 14 >> device ata1 at isa? port IO_WD2 irq 15 >> device ata >> device atadisk # ATA disk drives >> device atapicd # ATAPI CDROM drives >> device atapifd # ATAPI floppy drives >> device atapist # ATAPI tape drives >> options ATA_STATIC_ID #Static device numbering >> # options ATA_ENABLE_ATAPI_DMA #Enable DMA on ATAPI devices >> >> # SCSI Controllers >> # device ahb # EISA AHA1742 family >> # device ahc # AHA2940 and onboard AIC7xxx devices >> # device amd # AMD 53C974 (Teckram DC-390(T)) >> # device isp # Qlogic family >> # device ncr # NCR/Symbios Logic >> # device sym # NCR/Symbios Logic (newer chipsets) >> # options SYM_SETUP_LP_PROBE_MAP=0x40 >> # Allow ncr to attach legacy NCR devices when >> # both sym and ncr are configured >> >> # device adv0 at isa? >> # device adw >> # device bt0 at isa? >> # device aha0 at isa? >> # device aic0 at isa? >> >> # device ncv # NCR 53C500 >> # device nsp # Workbit Ninja SCSI-3 >> # device stg # TMC 18C30/18C50 >> >> # SCSI peripherals >> # device scbus # SCSI bus (required) >> # device da # Direct Access (disks) >> # device sa # Sequential Access (tape etc) >> # device cd # CD >> # device pass # Passthrough device (direct SCSI access) >> >> # RAID controllers interfaced to the SCSI subsystem >> # device asr # DPT SmartRAID V, VI and Adaptec SCSI RAID >> # device dpt # DPT Smartcache - See LINT for options! >> # device mly # Mylex AcceleRAID/eXtremeRAID >> >> # RAID controllers >> # device ida # Compaq Smart RAID >> # device amr # AMI MegaRAID >> # device mlx # Mylex DAC960 family >> # device twe # 3ware Escalade >> >> # atkbdc0 controls both the keyboard and the PS/2 mouse >> device atkbdc0 at isa? port IO_KBD >> device atkbd0 at atkbdc? irq 1 flags 0x1 >> device psm0 at atkbdc? irq 12 >> >> device vga0 at isa? >> >> # splash screen/screen saver >> pseudo-device splash >> >> # syscons is the default console driver, resembling an SCO console >> device sc0 at isa? flags 0x100 >> >> # Enable this and PCVT_FREEBSD for pcvt vt220 compatible console driver >> # device vt0 at isa? >> # options XSERVER # support for X server on a vt console >> # options FAT_CURSOR # start with block cursor >> # If you have a ThinkPAD, uncomment this along with the rest of the PCVT >lines >> # options PCVT_SCANSET=2 # IBM keyboards are non-std >> >> # Floating point support - do not disable. >> device npx0 at nexus? port IO_NPX irq 13 >> >> # Power management support (see LINT for more options) >> device apm0 at nexus? disable flags 0x20 # Advanced Power Management >> >> # PCCARD (PCMCIA) support >> # device card >> # device pcic0 at isa? irq 0 port 0x3e0 iomem 0xd0000 >> # device pcic1 at isa? irq 0 port 0x3e2 iomem 0xd4000 disable >> >> # Serial (COM) ports >> device sio0 at isa? port IO_COM1 flags 0x10 irq 4 >> device sio1 at isa? port IO_COM2 irq 3 >> device sio2 at isa? disable port IO_COM3 irq 5 >> device sio3 at isa? disable port IO_COM4 irq 9 >> >> # Parallel port >> device ppc0 at isa? irq 7 >> device ppbus # Parallel port bus (required) >> device lpt # Printer >> # device plip # TCP/IP over parallel >> device ppi # Parallel port interface device >> # device vpo # Requires scbus and da >> >> >> # PCI Ethernet NICs. >> # device de # DEC/Intel DC21x4x (``Tulip'') >> device fxp # Intel EtherExpress PRO/100B (82557, 82558) >> # device tx # SMC 9432TX (83c170 ``EPIC'') >> device vx # 3Com 3c590, 3c595 (``Vortex'') >> # device wx # Intel Gigabit Ethernet Card (``Wiseman'') >> >> # PCI Ethernet NICs that use the common MII bus controller code. >> # NOTE: Be sure to keep the 'device miibus' line in order to use these >NICs! >> device miibus # MII bus support >> device dc # DEC/Intel 21143 and various workalikes >> # device pcn # AMD Am79C79x PCI 10/100 NICs >> # device rl # RealTek 8129/8139 >> # device sf # Adaptec AIC-6915 (``Starfire'') >> # device sis # Silicon Integrated Systems SiS 900/SiS 7016 >> # device ste # Sundance ST201 (D-Link DFE-550TX) >> # device tl # Texas Instruments ThunderLAN >> # device vr # VIA Rhine, Rhine II >> # device wb # Winbond W89C840F >> device xl # 3Com 3c90x (``Boomerang'', ``Cyclone'') >> >> # ISA Ethernet NICs. >> # device ed0 at isa? port 0x280 irq 10 iomem 0xd8000 >> # device ex >> # device ep >> # device fe0 at isa? port 0x300 >> # WaveLAN/IEEE 802.11 wireless NICs. Note: the WaveLAN/IEEE really >> # exists only as a PCMCIA device, so there is no ISA attatement needed >> # and resources will always be dynamically assigned by the pccard code. >> # device wi >> # Aironet 4500/4800 802.11 wireless NICs. Note: the declaration below will >> # work for PCMCIA and PCI cards, as well as ISA cards set to ISA PnP >> # mode (the factory default). If you set the switches on your ISA >> # card for a manually chosen I/O address and IRQ, you must specify >> # those paremeters here. >> # device an >> # Xircom Ethernet >> # device xe >> # The probe order of these is presently determined by >i386/isa/isa_compat.c. >> # device ie0 at isa? port 0x300 irq 10 iomem 0xd0000 >> # device le0 at isa? port 0x300 irq 5 iomem 0xd0000 >> # device lnc0 at isa? port 0x280 irq 10 drq 0 >> # device cs0 at isa? port 0x300 >> # device sn0 at isa? port 0x300 irq 10 >> >> # Pseudo devices - the number indicates how many units to allocated. >> pseudo-device loop # Network loopback >> pseudo-device ether # Ethernet support >> # pseudo-device sl 1 # Kernel SLIP >> # pseudo-device ppp 1 # Kernel PPP >> # pseudo-device tun # Packet tunnel. >> pseudo-device pty # Pseudo-ttys (telnet etc) >> pseudo-device md # Memory "disks" >> pseudo-device gif 4 # IPv6 and IPv4 tunneling >> pseudo-device faith 1 # IPv6-to-IPv4 relaying (translation) >> >> # The `bpf' pseudo-device enables the Berkeley Packet Filter. >> # Be aware of the administrative consequences of enabling this! >> pseudo-device bpf #Berkeley packet filter >> >> # USB support >> # device uhci # UHCI PCI->USB interface >> # device ohci # OHCI PCI->USB interface >> device usb # USB Bus (required) >> device ugen # Generic >> device uhid # "Human Interface Devices" >> device ukbd # Keyboard >> device ulpt # Printer >> # device umass # Disks/Mass storage - Requires scbus and da >> device ums # Mouse >> # device uscanner # Scanners >> # USB Ethernet, requires mii >> # device aue # ADMtek USB ethernet >> # device cue # CATC USB ethernet >> # device kue # Kawasaki LSI USB ethernet >> _____________________________________________________________ ========GET YOUR FREE E-MAIL============ http://freemail.cahostnet.net Web Hosting http://www.cahostnet.com To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20010126123523.068D52750>