Date: Thu, 21 Oct 2004 18:55:46 -0500 From: Vulpes Velox <v.velox@vvelox.net> To: current@freebsd.org Subject: X slowness on 5.3rc1 Message-ID: <20041021185546.16ed1fe7@fennec>
next in thread | raw e-mail | index | archive | help
Any suggestions for fixing the slowness of X on 5.3rc1?
Compared too 5.2.1, it crawls :(
Is there any sorta debugging I can turn off that has not been turned
off by defualt yet? Was just thinking of these, and I sorta remember
it being announced that it is all turned off at beta3 or 5 or so?
Also for some reason I have to put "machdep.disable_mtrrs=1" in the
loader.conf now or it freezes upon start now.
Any ways, here is the output from dmesg
Copyright (c) 1992-2004 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993,
1994 The Regents of the University of California. All rights
reserved. FreeBSD 5.3-RC1 #1: Wed Oct 20 09:41:47 CDT 2004
root@fennec:/usr/obj/usr/src/sys/fennec-1
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: AMD Duron(tm) processor (1300.01-MHz 686-class CPU)
Origin = "AuthenticAMD" Id = 0x671 Stepping = 1
Features=0x383fbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,P
GE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE> AMD
Features=0xc0480000<MP,AMIE,DSP,3DNow!> real memory = 536805376 (511
MB) avail memory = 511430656 (487 MB)
mptable_probe: MP Config Table has bad signature: \M-t\^O
ACPI APIC Table: <Nvidia AWRDACPI>
ioapic0 <Version 1.1> irqs 0-23 on motherboard
npx0: [FAST]
npx0: <math processor> on motherboard
npx0: INT 16 interface
acpi0: <Nvidia AWRDACPI> on motherboard
acpi0: Power Button (fixed)
Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x4008-0x400b on acpi0
cpu0: <ACPI CPU> on acpi0
acpi_tz0: <Thermal Zone> on acpi0
acpi_button0: <Power Button> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf0-0xcf3,0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
agp0: <NVIDIA nForce2 AGP Controller> mem 0xd8000000-0xdfffffff at
device 0.0 on pci0 pci0: <memory, RAM> at device 0.1 (no driver
attached) pci0: <memory, RAM> at device 0.2 (no driver attached)
pci0: <memory, RAM> at device 0.3 (no driver attached)
pci0: <memory, RAM> at device 0.4 (no driver attached)
pci0: <memory, RAM> at device 0.5 (no driver attached)
isab0: <PCI-ISA bridge> at device 1.0 on pci0
isa0: <ISA bus> on isab0
pci0: <serial bus, SMBus> at device 1.1 (no driver attached)
ohci0: <OHCI (generic) USB controller> mem 0xec002000-0xec002fff irq
21 at device 2.0 on pci0 ohci0: [GIANT-LOCKED]
usb0: OHCI version 1.0, legacy support
usb0: <OHCI (generic) USB controller> on ohci0
usb0: USB revision 1.0
uhub0: nVidia OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 4 ports with 4 removable, self powered
ohci1: <OHCI (generic) USB controller> mem 0xec003000-0xec003fff irq
20 at device 2.1 on pci0 ohci1: [GIANT-LOCKED]
usb1: OHCI version 1.0, legacy support
usb1: <OHCI (generic) USB controller> on ohci1
usb1: USB revision 1.0
uhub1: nVidia OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 4 ports with 4 removable, self powered
pci0: <serial bus, USB> at device 2.2 (no driver attached)
pcm0: <nVidia nForce2 400> port 0xc800-0xc87f,0xc400-0xc4ff mem
0xec000000-0xec000fff irq 20 at device 6.0 on pci0 pcm0:
[GIANT-LOCKED] pcm0: <Avance Logic ALC658 AC97 Codec>
pcib1: <ACPI PCI-PCI bridge> at device 8.0 on pci0
pci1: <ACPI PCI bus> on pcib1
pci1: <multimedia, video> at device 9.0 (no driver attached)
vr0: <VIA VT6102 Rhine II 10/100BaseTX> port 0xb000-0xb0ff mem
0xeb000000-0xeb0000ff irq 18 at device 11.0 on pci1 miibus0: <MII bus>
on vr0 ukphy0: <Generic IEEE 802.3u media interface> on miibus0
ukphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
vr0: Ethernet address: 00:50:8d:5f:4b:ae
atapci0: <nVidia nForce2 MCP UDMA133 controller> port
0xf000-0xf00f,0x376,0x170-0x177,0x3f6,0x1f0-0x1f7 at device 9.0 on
pci0 ata0: channel #0 on atapci0
ata1: channel #1 on atapci0
atapci1: <GENERIC ATA controller> port
0xe800-0xe80f,0xb70-0xb73,0x970-0x977,0xbf0-0xbf3,0x9f0-0x9f7 irq 22
at device 11.0 on pci0 ata2: channel #0 on atapci1
ata3: channel #1 on atapci1
pcib2: <ACPI PCI-PCI bridge> at device 30.0 on pci0
pci2: <ACPI PCI bus> on pcib2
nvidia0: <GeForce FX 5200> mem
0xe0000000-0xe7ffffff,0xe9000000-0xe9ffffff irq 19 at device 0.0 on
pci2 nvidia0: [GIANT-LOCKED]
fdc0: <floppy drive controller> port 0x3f7,0x3f0-0x3f5 irq 6 drq 2 on
acpi0 fdc0: [FAST]
sio0: <16550A-compatible COM port> port 0x3f8-0x3ff irq 4 flags 0x10
on acpi0 sio0: type 16550A
ppc0: <ECP parallel printer port> port 0x778-0x77b,0x378-0x37f irq 7
drq 3 on acpi0 ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in
COMPATIBLE mode ppc0: FIFO with 16/16/9 bytes threshold
ppbus0: <Parallel port bus> on ppc0
plip0: <PLIP network interface> on ppbus0
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
atkbdc0: <Keyboard controller (i8042)> port 0x64,0x60 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: [GIANT-LOCKED]
psm0: model IntelliMouse, device ID 3
pmtimer0 on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sio1: configured irq 3 not in bitmap of probed irqs 0
sio1: port may not be enabled
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on
isa0 Timecounter "TSC" frequency 1300006192 Hz quality 800
Timecounters tick every 1.000 msec
IPv6 packet filtering initialized, default to accept, logging limited
to 100 packets/entry ipfw2 initialized, divert enabled, rule-based
forwarding enabled, default to accept, logging limited to 100
packets/entry by default ad0: 39205MB <Maxtor 6E040L0/NAR61590>
[79656/16/63] at ata0-master UDMA133 acd0: CDROM <LTN526D/9S01> at
ata1-slave UDMA33 cd0 at ata1 bus 0 target 1 lun 0
cd0: <LITEON CD-ROM LTN526D 9S01> Removable CD-ROM SCSI-0 device
cd0: 33.000MB/s transfers
cd0: Attempt to query device size failed: NOT READY, Medium not
present
Here is my kernel config....
machine i386
cpu I686_CPU
ident fennec-1
#CPU options
options CPU_ATHLON_SSE_HACK
options CPU_ENABLE_SSE
options CPU_FASTER_5X86_FPU
# To statically compile in device wiring instead of /boot/device.hints
#hints "GENERIC.hints" # Default places to look for devices.
#options SCHED_4BSD # 4BSD scheduler
options SCHED_ULE # ULE scheduler
options INET # InterNETworking
options INET6 # IPv6 communications protocols
options FFS # Berkeley Fast Filesystem
options SOFTUPDATES # Enable FFS soft updates support
options UFS_ACL # Support for access control lists
option UFS_EXTATTR # Support for extra ufs features
options UFS_DIRHASH # Improve performance on big directories
options MD_ROOT # MD is a potential root device
options NFSCLIENT # Network Filesystem Client
options NFSSERVER # Network Filesystem Server
options NFS_ROOT # NFS usable as /, requires NFSCLIENT
options MSDOSFS # MSDOS Filesystem
options CD9660 # ISO 9660 Filesystem
options PROCFS # Process filesystem (requires PSEUDOFS)
options PSEUDOFS # Pseudo-filesystem framework
options GEOM_GPT # GUID Partition Tables.
options COMPAT_43 # Compatible with BSD 4.3 [KEEP THIS!]
options COMPAT_FREEBSD4 # Compatible with FreeBSD4
options SCSI_DELAY=15000 # Delay (in ms) before probing SCSI
#options KTRACE # ktrace(1) support
options SYSVSHM # SYSV-style shared memory
options SYSVMSG # SYSV-style message queues
options SYSVSEM # SYSV-style semaphores
options _KPOSIX_PRIORITY_SCHEDULING # POSIX P1003_1B real-time
extensions options KBD_INSTALL_CDEV # install a CDEV entry in
/dev options AHC_REG_PRETTY_PRINT # Print register bitfields in
debug # output. Adds ~128k to driver.
options AHD_REG_PRETTY_PRINT # Print register bitfields in debug
# output. Adds ~215k to driver.
options ADAPTIVE_GIANT # Giant mutex is adaptive.
options DIRECTIO # bypass kernel buffer for files with
# the O_DIRECT flag set
device apic # I/O APIC
# Bus support. Do not remove isa, even if you have no isa slots
device isa
device pci
# Floppy drives
device fdc
# ATA and ATAPI devices
device ata
device atadisk # ATA disk drives
device ataraid # ATA RAID drives
device atapicd # ATAPI CDROM drives
device atapifd # ATAPI floppy drives
device atapist # ATAPI tape drives
options ATA_STATIC_ID # Static device numbering
device atapicam # use a atapi cdrom as scsi
# SCSI peripherals
device scbus # SCSI bus (required for SCSI)
device ch # SCSI media changers
device da # Direct Access (disks)
device sa # Sequential Access (tape etc)
device cd # CD
device pass # Passthrough device (direct SCSI access)
device ses # SCSI Environmental Services (and SAF-TE)
# atkbdc0 controls both the keyboard and the PS/2 mouse
device atkbdc # AT keyboard controller
device atkbd # AT keyboard
device psm # PS/2 mouse
device vga # VGA video card driver
options VGA_WIDTH90 # VGA width 90 ability
device splash # Splash screen and screen saver support
# syscons is the default console driver, resembling an SCO console
device sc
options SC_NORM_ATTR=(FG_GREEN|BG_BLACK)
options SC_NORM_REV_ATTR=(FG_BLACK|BG_GREEN)
options SC_KERNEL_CONS_ATTR=(FG_RED|BG_BLACK)
options SC_KERNEL_CONS_REV_ATTR=(FG_BLACK|BG_RED)
# Floating point support - do not disable.
device npx
# Serial (COM) ports
device sio # 8250, 16[45]50 based serial ports
# Parallel port
device ppc
device ppbus # Parallel port bus (required)
device lpt # Printer
device plip # TCP/IP over parallel
device ppi # Parallel port interface device
#device vpo # Requires scbus and da
# Pseudo devices.
device loop # Network loopback
device mem # Memory and kernel memory devices
device io # I/O device
device random # Entropy device
device ether # Ethernet support
device sl # Kernel SLIP
device ppp # Kernel PPP
device tun # Packet tunnel.
device pty # Pseudo-ttys (telnet etc)
device md # Memory "disks"
device gif # IPv6 and IPv4 tunneling
device faith # IPv6-to-IPv4 relaying (translation)
# USB support
device uhci # UHCI PCI->USB interface
device ohci # OHCI PCI->USB interface
device usb # USB Bus (required)
#device udbp # USB Double Bulk Pipe devices
options DEVICE_POLLING
options HZ=1000
# The `bpf' device enables the Berkeley Packet Filter.
# Be aware of the administrative consequences of enabling this!
device bpf # Berkeley packet filter
options IPFIREWALL #firewall
options IPFIREWALL_VERBOSE #enable logging to syslogd(8)
options IPFIREWALL_VERBOSE_LIMIT=100 #limit verbosity
options IPFIREWALL_DEFAULT_TO_ACCEPT #allow everything by
default options IPV6FIREWALL #firewall for IPv6
options IPV6FIREWALL_VERBOSE
options IPV6FIREWALL_VERBOSE_LIMIT=100
options IPV6FIREWALL_DEFAULT_TO_ACCEPT
options IPFIREWALL_FORWARD #packet destination changes
options IPDIVERT #divert sockets
device crypto # core crypto support
device cryptodev # /dev/crypto for access to h/w
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20041021185546.16ed1fe7>