Date: Mon, 27 May 2002 01:11:56 -0600 From: Stephane R.D.Zanoni <Stephane@omni-ts.com> To: freebsd-questions@FreeBSD.org, Subject: Error compiling my kernel. Message-ID: <1022483516.cd8efc40Stephane@omni-ts.com>
index | next in thread | raw e-mail
[-- Attachment #1 --] Here's a quick cap. of what i've done. I installed FreeBSD 4.5, recompiled it for multiprocessor support and everything worked fine. I then ran cvsup, and then ran buildworld to resync config and stuff. When i try to compile now i get this error. I don't know why it's breaking on the floppy disk line. This is a Compaq 5500 Rackmount Server. Anyhelp would be apreciated. ----- SNIP ----- fractal# make buildkernel KERNCONF=fractal -------------------------------------------------------------- >>> Kernel build for fractal started on Mon May 27 01:12:17 MDT 2002 -------------------------------------------------------------- ===> fractal mkdir -p /usr/obj/usr/src/sys cd /usr/src/sys/i386/conf; PATH=/usr/obj/usr/src/i386/usr/sbin:/usr/obj/usr/src/i386/usr/bin:/usr/obj/usr/src/i386/usr/games:/sbin:/bin:/usr/sbin:/usr/bin config -d /usr/obj/usr/src/sys/fractal /usr/src/sys/i386/conf/fractal config: /usr/src/sys/i386/conf/fractal:74: devices with zero units are not likely to be correct *** Error code 1 Stop in /usr/src. *** Error code 1 Stop in /usr/src. ----- SNIP ----- Stephane [-- Attachment #2 --] # GENERIC -- Generic kernel configuration file for FreeBSD/i386 # # For more information on this file, please read the handbook section on # Kernel Configuration Files: # # http://www.FreeBSD.org/handbook/kernelconfig-config.html # # The handbook is also available locally in /usr/share/doc/handbook # if you've installed the doc distribution, otherwise always see the # FreeBSD World Wide Web server (http://www.FreeBSD.org/) for the # latest information. # # An exhaustive list of options and more detailed explanations of the # device lines is also present in the ./LINT configuration file. If you are # in doubt as to the purpose or necessity of a line, check first in LINT. # # $FreeBSD: src/sys/i386/conf/GENERIC,v 1.246.2.38 2002/01/25 17:41:40 murray Exp $ machine i386 cpu I386_CPU cpu I486_CPU cpu I586_CPU cpu I686_CPU ident GENERIC maxusers 0 #makeoptions DEBUG=-g #Build kernel with gdb(1) debug symbols options MATH_EMULATE #Support for x87 emulation options INET #InterNETworking ## Added March 25, 2002 -- For Firewall Support options IPFILTER options IPFILTER_LOG options IPFILTER_DEFAULT_BLOCK ## ## Added March 25, 200 -- For Quota Support options QUOTA ## options INET6 #IPv6 communications protocols options FFS #Berkeley Fast Filesystem options FFS_ROOT #FFS usable as root device [keep this!] options SOFTUPDATES #Enable FFS soft updates support options UFS_DIRHASH #Improve performance on big directories options MFS #Memory Filesystem options MD_ROOT #MD is a potential root device options NFS #Network Filesystem options NFS_ROOT #NFS usable as root device, NFS required options MSDOSFS #MSDOS Filesystem options CD9660 #ISO 9660 Filesystem options CD9660_ROOT #CD-ROM usable as root, CD9660 required options PROCFS #Process filesystem options COMPAT_43 #Compatible with BSD 4.3 [KEEP THIS!] options SCSI_DELAY=15000 #Delay (in ms) before probing SCSI options UCONSOLE #Allow users to grab the console options USERCONFIG #boot -c editor options VISUAL_USERCONFIG #visual boot -c editor options KTRACE #ktrace(1) support options SYSVSHM #SYSV-style shared memory options SYSVMSG #SYSV-style message queues options SYSVSEM #SYSV-style semaphores options P1003_1B #Posix P1003_1B real-time extensions options _KPOSIX_PRIORITY_SCHEDULING options ICMP_BANDLIM #Rate limit bad replies options KBD_INSTALL_CDEV # install a CDEV entry in /dev # To make an SMP kernel, the next two are needed options SMP # Symmetric MultiProcessor Kernel options APIC_IO # Symmetric (APIC) I/O device isa device eisa device pci device fdc0 at isa? port IO_FD1 irq 6 drq 2 device fd0 at fdc0 drive 0 device fd1 at fdc0 drive 1 # ATA and ATAPI devices device ata0 at isa? port IO_WD1 irq 14 device ata1 at isa? port IO_WD2 irq 15 device ata device atadisk # ATA disk drives device atapicd # ATAPI CDROM drives device atapifd # ATAPI floppy drives device atapist # ATAPI tape drives options ATA_STATIC_ID #Static device numbering # SCSI Controllers device scbus # SCSI bus (required) device da # Direct Access (disks) device sa # Sequential Access (tape etc) device cd # CD device pass # Passthrough device (direct SCSI access) # RAID controllers device ida # Compaq Smart RAID # atkbdc0 controls both the keyboard and the PS/2 mouse device atkbdc0 at isa? port IO_KBD device atkbd0 at atkbdc? irq 1 flags 0x1 device psm0 at atkbdc? irq 12 device vga0 at isa? # splash screen/screen saver pseudo-device splash # syscons is the default console driver, resembling an SCO console device sc0 at isa? flags 0x100 # Enable this and PCVT_FREEBSD for pcvt vt220 compatible console driver #device vt0 at isa? #options XSERVER # support for X server on a vt console #options FAT_CURSOR # start with block cursor # If you have a ThinkPAD, uncomment this along with the rest of the PCVT lines #options PCVT_SCANSET=2 # IBM keyboards are non-std # Floating point support - do not disable. device npx0 at nexus? port IO_NPX irq 13 # Power management support (see LINT for more options) device apm0 at nexus? disable flags 0x20 # Advanced Power Management # Serial (COM) ports device sio0 at isa? port IO_COM1 flags 0x10 irq 4 device sio1 at isa? port IO_COM2 irq 3 device sio2 at isa? disable port IO_COM3 irq 5 device sio3 at isa? disable port IO_COM4 irq 9 # Parallel port device ppc0 at isa? irq 7 device ppbus # Parallel port bus (required) device lpt # Printer device plip # TCP/IP over parallel device ppi # Parallel port interface device #device vpo # Requires scbus and da # PCI Ethernet NICs that use the common MII bus controller code. # NOTE: Be sure to keep the 'device miibus' line in order to use these NICs! device fxp # Intel EtherExpress PRO/100B (82557, 82558) device xl # 3Com 3c90x (``Boomerang'', ``Cyclone'') # The probe order of these is presently determined by i386/isa/isa_compat.c. device ie0 at isa? port 0x300 irq 10 iomem 0xd0000 #device le0 at isa? port 0x300 irq 5 iomem 0xd0000 device lnc0 at isa? port 0x280 irq 10 drq 0 device cs0 at isa? port 0x300 device sn0 at isa? port 0x300 irq 10 # Pseudo devices - the number indicates how many units to allocate. pseudo-device loop # Network loopback pseudo-device ether # Ethernet support pseudo-device sl 1 # Kernel SLIP pseudo-device ppp 1 # Kernel PPP pseudo-device tun # Packet tunnel. pseudo-device pty # Pseudo-ttys (telnet etc) pseudo-device md # Memory "disks" pseudo-device gif # IPv6 and IPv4 tunneling pseudo-device faith 1 # IPv6-to-IPv4 relaying (translation) # The `bpf' pseudo-device enables the Berkeley Packet Filter. # Be aware of the administrative consequences of enabling this! pseudo-device bpf #Berkeley packet filterhelp
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?1022483516.cd8efc40Stephane>