Date: Fri, 26 Jan 2001 15:42:38 +0300 From: "Artem Koutchine" <matrix@ipform.ru> To: <ben@cahostnet.net>, "Doug Young" <dougy@bryden.apana.org.au>, <questions@FreeBSD.ORG> Subject: Re: New Kernel install Message-ID: <005e01c08795$9fd9c5a0$0c00a8c0@ipform.ru> References: <20010126123523.068D52750@sitemail.everyone.net>
next in thread | previous in thread | raw e-mail | index | archive | help
Did you cvsuped lately? Try cvsupping again and use make buildkernel KERNEL=YOUKERNELNAME make installkernel KERNEL=YOUKERNELNAME ----- Original Message ----- From: "Benjamin Ossei" <ben@cahostnet.net> To: "Doug Young" <dougy@bryden.apana.org.au>; <questions@FreeBSD.ORG> Sent: Friday, January 26, 2001 3:35 PM Subject: Re: New Kernel install > Do you think there's a bug in the software? > > --- "Doug Young" <dougy@bryden.apana.org.au> > > wrote: > >I tried the kernel compile in 4.2 earlier today & got similar response .... > >looks like > >some "feature" there that needs attention > > > >----- Original Message ----- > >From: "Benjamin Ossei" <ben@cahostnet.net> > >To: <questions@FreeBSD.ORG> > >Sent: Friday, January 26, 2001 10:23 PM > >Subject: New Kernel install > > > > > >Hi, > > > >I'm trying to compile a new kernel for my machine. I used the GENERIC > >configuration as a starting point and added what I needed and commented out > >what I didn't want. I was able to issue the command /usr/sbin/config -g > >"newkernel" fine but when I go to build the kernel with the make depend or > >just make I get a stop error. The error indicates that there's unterminited > >string or something to the effect and gives me this "#IF" for the problem. > >I've gone through my kernel config and can not see anything. I'm not very > >good at this I should also say. > > > >I'm using Freebsd 4.2-Current. This is my first custom kernel. I've > >attached the file for your viewing and hopefully you can see my problem. I > >included the options IPFIREWALL_DEFAULT_TO_ACCEPT for now to get the machine > >up and running. I'll change this to DENY once I"m done and recompile the > >kernel. > > > >Thanks for your help. > > > > > > > >_____________________________________________________________ > >========GET YOUR FREE E-MAIL============ > >http://freemail.cahostnet.net > >Web Hosting http://www.cahostnet.com > > > > > > > >--------------------------------------------------------------------- ------- > >---- > > > > > >> # > >> # GENERIC -- Generic kernel configuration file for FreeBSD/i386 > >> # > >> # For more information on this file, please read the handbook section on > >> # Kernel Configuration Files: > >> # > >> # http://www.FreeBSD.org/handbook/kernelconfig-config.html > >> # > >> # The handbook is also available locally in /usr/share/doc/handbook > >> # if you've installed the doc distribution, otherwise always see the > >> # FreeBSD World Wide Web server (http://www.FreeBSD.org/) for the > >> # latest information. > >> # > >> # An exhaustive list of options and more detailed explanations of the > >> # device lines is also present in the ./LINT configuration file. If you > >are > >> # in doubt as to the purpose or necessity of a line, check first in LINT. > >> # > >> # $FreeBSD: src/sys/i386/conf/FWKERNEL,v 1 2001/01/25 22:45 Ben Ossei Exp > >$ > >> > >> machine i386 > >> cpu I386_CPU > >> cpu I486_CPU > >> cpu I586_CPU > >> cpu I686_CPU > >> ident FWKERNEL > >> maxusers 64 > >> > >> # makeoptions DEBUG=-g #Build kernel with gdb(1) debug symbols > >> > >> # options MATH_EMULATE #Support for x87 emulation > >> options INET #InterNETworking > >> options INET6 #IPv6 communications protocols > >> options FFS #Berkeley Fast Filesystem > >> options FFS_ROOT #FFS usable as root device [keep this!] > >> options SOFTUPDATES #Enable FFS soft updates support > >> options MFS #Memory Filesystem > >> options MD_ROOT #MD is a potential root device > >> # options NFS #Network Filesystem > >> # options NFS_ROOT #NFS usable as root device, NFS required > >> # options MSDOSFS #MSDOS Filesystem > >> options CD9660 #ISO 9660 Filesystem > >> options CD9660_ROOT #CD-ROM usable as root, CD9660 required > >> options PROCFS #Process filesystem > >> options COMPAT_43 #Compatible with BSD 4.3 [KEEP THIS!] > >> options SCSI_DELAY=15000 #Delay (in ms) before probing SCSI > >> # options UCONSOLE #Allow users to grab the console > >> options USERCONFIG #boot -c editor > >> options VISUAL_USERCONFIG #visual boot -c editor > >> options KTRACE #ktrace(1) support > >> options SYSVSHM #SYSV-style shared memory > >> options SYSVMSG #SYSV-style message queues > >> options SYSVSEM #SYSV-style semaphores > >> options P1003_1B #Posix P1003_1B real-time extensions > >> options _KPOSIX_PRIORITY_SCHEDULING > >> options ICMP_BANDLIM #Rate limit bad replies > >> options KBD_INSTALL_CDEV #install a CDEV entry in /dev > >> options IPFIREWALL > >> options IPFIREWALL_VERBOSE > >> options IPDIVERT > >> options IPFIREWALL_DEFAULT_TO_ACCEPT > >> options IPFIREWALL_VERBOSE_LIMIT=100 > >> options IPFILTER > >> options IPFILTER_LOG > >> > >> # To make an SMP kernel, the next two are needed > >> options SMP # Symmetric MultiProcessor Kernel > >> options APIC_IO # Symmetric (APIC) I/O > >> > >> device isa > >> device eisa > >> device pci > >> > >> # Floppy drives > >> device fdc0 at isa? port IO_FD1 irq 6 drq 2 > >> device fd0 at fdc0 drive 0 > >> # device fd1 at fdc0 drive 1 > >> > >> # ATA and ATAPI devices > >> device ata0 at isa? port IO_WD1 irq 14 > >> device ata1 at isa? port IO_WD2 irq 15 > >> device ata > >> device atadisk # ATA disk drives > >> device atapicd # ATAPI CDROM drives > >> device atapifd # ATAPI floppy drives > >> device atapist # ATAPI tape drives > >> options ATA_STATIC_ID #Static device numbering > >> # options ATA_ENABLE_ATAPI_DMA #Enable DMA on ATAPI devices > >> > >> # SCSI Controllers > >> # device ahb # EISA AHA1742 family > >> # device ahc # AHA2940 and onboard AIC7xxx devices > >> # device amd # AMD 53C974 (Teckram DC-390(T)) > >> # device isp # Qlogic family > >> # device ncr # NCR/Symbios Logic > >> # device sym # NCR/Symbios Logic (newer chipsets) > >> # options SYM_SETUP_LP_PROBE_MAP=0x40 > >> # Allow ncr to attach legacy NCR devices when > >> # both sym and ncr are configured > >> > >> # device adv0 at isa? > >> # device adw > >> # device bt0 at isa? > >> # device aha0 at isa? > >> # device aic0 at isa? > >> > >> # device ncv # NCR 53C500 > >> # device nsp # Workbit Ninja SCSI-3 > >> # device stg # TMC 18C30/18C50 > >> > >> # SCSI peripherals > >> # device scbus # SCSI bus (required) > >> # device da # Direct Access (disks) > >> # device sa # Sequential Access (tape etc) > >> # device cd # CD > >> # device pass # Passthrough device (direct SCSI access) > >> > >> # RAID controllers interfaced to the SCSI subsystem > >> # device asr # DPT SmartRAID V, VI and Adaptec SCSI RAID > >> # device dpt # DPT Smartcache - See LINT for options! > >> # device mly # Mylex AcceleRAID/eXtremeRAID > >> > >> # RAID controllers > >> # device ida # Compaq Smart RAID > >> # device amr # AMI MegaRAID > >> # device mlx # Mylex DAC960 family > >> # device twe # 3ware Escalade > >> > >> # atkbdc0 controls both the keyboard and the PS/2 mouse > >> device atkbdc0 at isa? port IO_KBD > >> device atkbd0 at atkbdc? irq 1 flags 0x1 > >> device psm0 at atkbdc? irq 12 > >> > >> device vga0 at isa? > >> > >> # splash screen/screen saver > >> pseudo-device splash > >> > >> # syscons is the default console driver, resembling an SCO console > >> device sc0 at isa? flags 0x100 > >> > >> # Enable this and PCVT_FREEBSD for pcvt vt220 compatible console driver > >> # device vt0 at isa? > >> # options XSERVER # support for X server on a vt console > >> # options FAT_CURSOR # start with block cursor > >> # If you have a ThinkPAD, uncomment this along with the rest of the PCVT > >lines > >> # options PCVT_SCANSET=2 # IBM keyboards are non-std > >> > >> # Floating point support - do not disable. > >> device npx0 at nexus? port IO_NPX irq 13 > >> > >> # Power management support (see LINT for more options) > >> device apm0 at nexus? disable flags 0x20 # Advanced Power Management > >> > >> # PCCARD (PCMCIA) support > >> # device card > >> # device pcic0 at isa? irq 0 port 0x3e0 iomem 0xd0000 > >> # device pcic1 at isa? irq 0 port 0x3e2 iomem 0xd4000 disable > >> > >> # Serial (COM) ports > >> device sio0 at isa? port IO_COM1 flags 0x10 irq 4 > >> device sio1 at isa? port IO_COM2 irq 3 > >> device sio2 at isa? disable port IO_COM3 irq 5 > >> device sio3 at isa? disable port IO_COM4 irq 9 > >> > >> # Parallel port > >> device ppc0 at isa? irq 7 > >> device ppbus # Parallel port bus (required) > >> device lpt # Printer > >> # device plip # TCP/IP over parallel > >> device ppi # Parallel port interface device > >> # device vpo # Requires scbus and da > >> > >> > >> # PCI Ethernet NICs. > >> # device de # DEC/Intel DC21x4x (``Tulip'') > >> device fxp # Intel EtherExpress PRO/100B (82557, 82558) > >> # device tx # SMC 9432TX (83c170 ``EPIC'') > >> device vx # 3Com 3c590, 3c595 (``Vortex'') > >> # device wx # Intel Gigabit Ethernet Card (``Wiseman'') > >> > >> # PCI Ethernet NICs that use the common MII bus controller code. > >> # NOTE: Be sure to keep the 'device miibus' line in order to use these > >NICs! > >> device miibus # MII bus support > >> device dc # DEC/Intel 21143 and various workalikes > >> # device pcn # AMD Am79C79x PCI 10/100 NICs > >> # device rl # RealTek 8129/8139 > >> # device sf # Adaptec AIC-6915 (``Starfire'') > >> # device sis # Silicon Integrated Systems SiS 900/SiS 7016 > >> # device ste # Sundance ST201 (D-Link DFE-550TX) > >> # device tl # Texas Instruments ThunderLAN > >> # device vr # VIA Rhine, Rhine II > >> # device wb # Winbond W89C840F > >> device xl # 3Com 3c90x (``Boomerang'', ``Cyclone'') > >> > >> # ISA Ethernet NICs. > >> # device ed0 at isa? port 0x280 irq 10 iomem 0xd8000 > >> # device ex > >> # device ep > >> # device fe0 at isa? port 0x300 > >> # WaveLAN/IEEE 802.11 wireless NICs. Note: the WaveLAN/IEEE really > >> # exists only as a PCMCIA device, so there is no ISA attatement needed > >> # and resources will always be dynamically assigned by the pccard code. > >> # device wi > >> # Aironet 4500/4800 802.11 wireless NICs. Note: the declaration below will > >> # work for PCMCIA and PCI cards, as well as ISA cards set to ISA PnP > >> # mode (the factory default). If you set the switches on your ISA > >> # card for a manually chosen I/O address and IRQ, you must specify > >> # those paremeters here. > >> # device an > >> # Xircom Ethernet > >> # device xe > >> # The probe order of these is presently determined by > >i386/isa/isa_compat.c. > >> # device ie0 at isa? port 0x300 irq 10 iomem 0xd0000 > >> # device le0 at isa? port 0x300 irq 5 iomem 0xd0000 > >> # device lnc0 at isa? port 0x280 irq 10 drq 0 > >> # device cs0 at isa? port 0x300 > >> # device sn0 at isa? port 0x300 irq 10 > >> > >> # Pseudo devices - the number indicates how many units to allocated. > >> pseudo-device loop # Network loopback > >> pseudo-device ether # Ethernet support > >> # pseudo-device sl 1 # Kernel SLIP > >> # pseudo-device ppp 1 # Kernel PPP > >> # pseudo-device tun # Packet tunnel. > >> pseudo-device pty # Pseudo-ttys (telnet etc) > >> pseudo-device md # Memory "disks" > >> pseudo-device gif 4 # IPv6 and IPv4 tunneling > >> pseudo-device faith 1 # IPv6-to-IPv4 relaying (translation) > >> > >> # The `bpf' pseudo-device enables the Berkeley Packet Filter. > >> # Be aware of the administrative consequences of enabling this! > >> pseudo-device bpf #Berkeley packet filter > >> > >> # USB support > >> # device uhci # UHCI PCI->USB interface > >> # device ohci # OHCI PCI->USB interface > >> device usb # USB Bus (required) > >> device ugen # Generic > >> device uhid # "Human Interface Devices" > >> device ukbd # Keyboard > >> device ulpt # Printer > >> # device umass # Disks/Mass storage - Requires scbus and da > >> device ums # Mouse > >> # device uscanner # Scanners > >> # USB Ethernet, requires mii > >> # device aue # ADMtek USB ethernet > >> # device cue # CATC USB ethernet > >> # device kue # Kawasaki LSI USB ethernet > >> > > _____________________________________________________________ > ========GET YOUR FREE E-MAIL============ > http://freemail.cahostnet.net > Web Hosting http://www.cahostnet.com > > > To Unsubscribe: send mail to majordomo@FreeBSD.org > with "unsubscribe freebsd-questions" in the body of the message > To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?005e01c08795$9fd9c5a0$0c00a8c0>