Date: Mon, 28 Mar 2016 13:44:36 +0100 From: Mark R V Murray <markm@FreeBSD.org> To: freebsd-arm <freebsd-arm@freebsd.org> Subject: RPi 2 with 7-inch touchscreen. Message-ID: <C03C0CD0-F135-4FF1-9F07-D1C73F46E5CF@FreeBSD.org>
index | next in thread | raw e-mail
[-- Attachment #1 --] Hi Folks, I have an RPi2 and I'm having some difficulties with the "official" 7-inch touch-screen: https://www.raspberrypi.org/blog/the-eagerly-awaited-raspberry-pi-display/ I know the touchscreen works, because it works with RaspBian. I can't get any activity out of it with FreeBSD, however. I'm using FreeBSD-11-CURRENT, and the boot image is based on an 11-CURRENT "official" download, but I added a very recent build of sysutils/u-boot-rpi2. I can build CURRENT on the machine (using a USB SSD, manually mounted), and I made sure I had the latest RPI2.DTB file in the FAT partition. The screen stays stubbornly OFF. Here is the relevant extract of CONFIG.TXT: hdmi_force_unplug=1 or hdmi_force_hotplug=1 or #hdmi_safe=1 or hdmi_ignore_edid=0xa5000080 hdmi_drive=2 hdmi_group=2 hdmi_mode=28 ... and I've tried a couple of combinations of the above with no luck. I can make an HDMI TV work, but not the inbuilt ribbon-cable interface. I suspect the DTB file as FreeBSD's is much smaller than RaspBian's, but I'm not all that clued in that department. Has anyone had any better luck than me? M -- Mark R V Murray [-- Attachment #2 --] -----BEGIN PGP SIGNATURE----- Version: GnuPG/MacGPG2 v2.0.28 Comment: GPGTools - http://gpgtools.org iEYEARECAAYFAlb5JzwACgkQzQuKNftX15P2VACgtFIyKoHKJEW6oMslD6HIeOLk Q9EAn0hTRkA7qgvhLZ7++RMqrJDbf6Bh =RlVM -----END PGP SIGNATURE-----home | help
Want to link to this message? Use this
URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?C03C0CD0-F135-4FF1-9F07-D1C73F46E5CF>