Date: Tue, 15 Nov 2005 18:30:03 +0100 From: Jens Holmqvist <zparta@gmail.com> To: "WOPR, Julien Nury" <jnury@wopr.ch> Cc: freebsd-hardware@freebsd.org Subject: Re: FreeBSD 6.0 and HighPoint RocketRAID 1520 (HPT372N) Message-ID: <3b41db850511150930r71449a55j79c13c4bd85fe07b@mail.gmail.com> In-Reply-To: <20051115170709.16DD194CBBF@safemail.wopr-hosting.com> References: <20051115170709.16DD194CBBF@safemail.wopr-hosting.com>
next in thread | previous in thread | raw e-mail | index | archive | help
i got a problem with my raid0 array in freebsd 6.0 works like a charm in 5.= 4 i got HPT372 but i dont get write_dma errors but my kernel panics this just game me hope that it isnt my hardware that is the problem :) On 11/15/05, WOPR, Julien Nury <jnury@wopr.ch> wrote: > > Hi, > > I try to install FreeBSD 6.0 on a i386 with a Highpoint RocketRAID 1520 > (with HPT372N Chipset). I have 2 identical disks in RAID1. The system is > correctly detected at boot : > > > -------------------------------------------------------------------------= --- > atapci0: <HighPoint HPT372N UDMA133 controller> port > 0x9f00-0x9f07,0x9e00-0x9e03,0x9d00-0x9d07,0x9c00-0x9c03,0x9a00-0x9aff irq > 18 > at device 3.0 on pci2 > ata2: <aATA channel 0> on atapci0 > ata3: <aATA channel 1> on atapci0 > ... > ad4: 78533MB <HDS728080PLA380 PF20A68A> at ata2-master UDMA133 > ad6: 78533MB <HDS728080PLA380 PF20A68A> at ata3-master UDMA133 > ar0: 78533MB <HighPoint v2 RocketRAID RAID1> status: READY > ar0: disk0 READY (master) using ad4 at ata2-master > ar0: disk1 READY (mirror) using ad6 at ata3-master > > -------------------------------------------------------------------------= --- > > In the install process I can create ar0s1a, but when it starts to write o= n > the disk (to create fs table) I get the following error sequence : > > > -------------------------------------------------------------------------= --- > ad6: FAILURE - WRITE_DMA status=3D51<READY,DSC,ERROR> > error=3D5<ABORTED,ILLEGAL_LENGHT> LBA=3D63 > ar0: WARNING - mirror protection lost. RAID1 array in DEGRADED mode > ad4: FAILURE - WRITE_DMA status=3D51<READY,DSC,ERROR> > error=3D5<ABORTED,ILLEGAL_LENGHT> LBA=3D9 > ada4: write metadata failed > ad4: FAILURE - WRITE_DMA status=3D51<READY,DSC,ERROR> > error=3D5<ABORTED,ILLEGAL_LENGHT> LBA=3D63 > ar0: FAILURE - RAID1 array broken > > -------------------------------------------------------------------------= --- > > Of course, I can't continue installation. > > I have no problem with the same machine and FreeBSD 5.4 (in 5.4, the card > is > recognized as a HPT372) > > I'have read " ATA RAID support has been rewritten and supports a number o= f > new metadata formats. " in the release note of the 6.0 ... > > Any idea ? > > Regards > > Julien Nury > > _______________________________________________ > freebsd-hardware@freebsd.org mailing list > http://lists.freebsd.org/mailman/listinfo/freebsd-hardware > To unsubscribe, send any mail to "freebsd-hardware-unsubscribe@freebsd.or= g > " >
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?3b41db850511150930r71449a55j79c13c4bd85fe07b>