Date: Mon, 18 Oct 2021 19:19:16 GMT From: Adrian Chadd <adrian@FreeBSD.org> To: src-committers@FreeBSD.org, dev-commits-src-all@FreeBSD.org, dev-commits-src-main@FreeBSD.org Subject: git: 9264bd386cfc - main - ipq4018: add a device tree file for the ASUS rt-ac58u router Message-ID: <202110181919.19IJJGwd080158@gitrepo.freebsd.org>
next in thread | raw e-mail | index | archive | help
The branch main has been updated by adrian: URL: https://cgit.FreeBSD.org/src/commit/?id=9264bd386cfcb3c081f9b7e2a695f25c367c0891 commit 9264bd386cfcb3c081f9b7e2a695f25c367c0891 Author: Adrian Chadd <adrian@FreeBSD.org> AuthorDate: 2021-10-16 03:13:04 +0000 Commit: Adrian Chadd <adrian@FreeBSD.org> CommitDate: 2021-10-18 19:18:46 +0000 ipq4018: add a device tree file for the ASUS rt-ac58u router This is the initial device tree file describing the ASUS RT-AC58U 2GHz/5GHz 11ac router. Obtained from: OpenWRT --- sys/dts/arm/qcom-ipq4018-rt-ac58u.dts | 312 ++++++++++++++++++++++++++++++++++ 1 file changed, 312 insertions(+) diff --git a/sys/dts/arm/qcom-ipq4018-rt-ac58u.dts b/sys/dts/arm/qcom-ipq4018-rt-ac58u.dts new file mode 100644 index 000000000000..8a280c79e942 --- /dev/null +++ b/sys/dts/arm/qcom-ipq4018-rt-ac58u.dts @@ -0,0 +1,312 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT + +#include "qcom-ipq4019.dtsi" +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/input/input.h> +#include <dt-bindings/soc/qcom,tcsr.h> + +/ { + model = "ASUS RT-AC58U"; + compatible = "asus,rt-ac58u"; + + memory { + device_type = "memory"; + reg = <0x80000000 0x8000000>; + }; + + aliases { + led-boot = &led_power; + led-failsafe = &led_power; + led-running = &led_power; + led-upgrade = &led_power; + serial0 = &blsp1_uart1; + }; + + chosen { + bootargs-append = " ubi.mtd=UBI_DEV"; +// stdout-path = "serial0:115200n8"; + stdout-path = "serial0"; + }; + + soc { + rng@22000 { + status = "okay"; + }; + + mdio@90000 { + status = "okay"; + }; + + ess-psgmii@98000 { + status = "okay"; + }; + + tcsr@1949000 { + compatible = "qcom,tcsr"; + reg = <0x1949000 0x100>; + qcom,wifi_glb_cfg = <TCSR_WIFI_GLB_CFG>; + }; + + tcsr@194b000 { + compatible = "qcom,tcsr"; + reg = <0x194b000 0x100>; + qcom,usb-hsphy-mode-select = <TCSR_USB_HSPHY_HOST_MODE>; + }; + + ess_tcsr@1953000 { + compatible = "qcom,tcsr"; + reg = <0x1953000 0x1000>; + qcom,ess-interface-select = <TCSR_ESS_PSGMII>; + }; + + tcsr@1957000 { + compatible = "qcom,tcsr"; + reg = <0x1957000 0x100>; + qcom,wifi_noc_memtype_m0_m2 = <TCSR_WIFI_NOC_MEMTYPE_M0_M2>; + }; + + usb3@8af8800 { + status = "okay"; + + dwc3@8a00000 { + #address-cells = <1>; + #size-cells = <0>; + + usb3_port1: port@1 { + reg = <1>; + #trigger-source-cells = <0>; + }; + + usb3_port2: port@2 { + reg = <2>; + #trigger-source-cells = <0>; + }; + }; + }; + + crypto@8e3a000 { + status = "okay"; + }; + + watchdog@b017000 { + status = "okay"; + }; + + ess-switch@c000000 { + status = "okay"; + }; + + edma@c080000 { + status = "okay"; + }; + }; + + keys { + compatible = "gpio-keys"; + + reset { + label = "reset"; + gpios = <&tlmm 4 GPIO_ACTIVE_LOW>; + linux,code = <KEY_RESTART>; + }; + + wps { + label = "wps"; + gpios = <&tlmm 63 GPIO_ACTIVE_LOW>; + linux,code = <KEY_WPS_BUTTON>; + }; + }; + + leds { + compatible = "gpio-leds"; + + led_power: status { + label = "blue:status"; + gpios = <&tlmm 3 GPIO_ACTIVE_HIGH>; + }; + + wan { + label = "blue:wan"; + gpios = <&tlmm 1 GPIO_ACTIVE_HIGH>; + }; + + wlan2G { + label = "blue:wlan2G"; + gpios = <&tlmm 58 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "phy0tpt"; + }; + + wlan5G { + label = "blue:wlan5G"; + gpios = <&tlmm 5 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "phy1tpt"; + }; + + usb { + label = "blue:usb"; + gpios = <&tlmm 0 GPIO_ACTIVE_HIGH>; + trigger-sources = <&usb3_port1>, <&usb3_port2>; + linux,default-trigger = "usbport"; + }; + + lan { + label = "blue:lan"; + gpios = <&tlmm 2 GPIO_ACTIVE_HIGH>; + }; + }; +}; + +&cryptobam { + status = "okay"; +}; + +&blsp_dma { + status = "okay"; +}; + +&tlmm { + serial_pins: serial_pinmux { + mux { + pins = "gpio60", "gpio61"; + function = "blsp_uart0"; + bias-disable; + }; + }; + + spi_0_pins: spi_0_pinmux { + mux { + function = "blsp_spi0"; + pins = "gpio55", "gpio56", "gpio57"; + drive-strength = <12>; + bias-disable; + }; + + mux_cs { + function = "gpio"; + pins = "gpio54", "gpio59"; + drive-strength = <2>; + bias-disable; + output-high; + }; + }; +}; + +&blsp1_spi1 { /* BLSP1 QUP1 */ + pinctrl-0 = <&spi_0_pins>; + pinctrl-names = "default"; + status = "okay"; + cs-gpios = <&tlmm 54 GPIO_ACTIVE_HIGH>, + <&tlmm 59 GPIO_ACTIVE_HIGH>; + + flash@0 { + /* + * U-boot looks for "n25q128a11" node, + * if we don't have it, it will spit out the following warning: + * "ipq: fdt fixup unable to find compatible node". + */ + compatible = "jedec,spi-nor"; + reg = <0>; + linux,modalias = "m25p80", "mx25l1606e", "n25q128a11"; + spi-max-frequency = <30000000>; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + label = "SBL1"; + reg = <0x00000000 0x00040000>; + read-only; + }; + partition@40000 { + label = "MIBIB"; + reg = <0x00040000 0x00020000>; + read-only; + }; + partition@60000 { + label = "QSEE"; + reg = <0x00060000 0x00060000>; + read-only; + }; + partition@c0000 { + label = "CDT"; + reg = <0x000c0000 0x00010000>; + read-only; + }; + partition@d0000 { + label = "DDRPARAMS"; + reg = <0x000d0000 0x00010000>; + read-only; + }; + partition@e0000 { + label = "APPSBLENV"; /* uboot env*/ + reg = <0x000e0000 0x00010000>; + read-only; + }; + partition@f0000 { + label = "APPSBL"; /* uboot */ + reg = <0x000f0000 0x00080000>; + read-only; + }; + partition@170000 { + label = "ART"; + reg = <0x00170000 0x00010000>; + read-only; + }; + /* 0x00180000 - 0x00200000 unused */ + }; + }; + + spi-nand@1 { + compatible = "spi-nand"; + reg = <1>; + spi-max-frequency = <30000000>; + + /* + * U-boot looks for "spinand,mt29f" node, + * if we don't have it, it will spit out the following warning: + * "ipq: fdt fixup unable to find compatible node". + */ + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + /* + * TODO: change to label = "ubi" once we drop 4.14. + * also drop the bootargs-append and all the + * userspace CI_UBIPART="UBI_DEV" remains. + */ + label = "UBI_DEV"; + reg = <0x00000000 0x08000000>; + }; + }; + }; +}; + +&blsp1_uart1 { + pinctrl-0 = <&serial_pins>; + pinctrl-names = "default"; + status = "okay"; +}; + +&usb3_ss_phy { + status = "okay"; +}; + +&usb3_hs_phy { + status = "okay"; +}; + +&wifi0 { + status = "okay"; + qcom,ath10k-calibration-variant = "RT-AC58U"; +}; + +&wifi1 { + status = "okay"; + qcom,ath10k-calibration-variant = "RT-AC58U"; +};
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?202110181919.19IJJGwd080158>