Date: Mon, 26 Jun 2000 03:49:59 -0400 (EDT) From: Arthur <chat@soon.com> To: Warner Losh <imp@village.org> Cc: freebsd-newbies@FreeBSD.ORG Subject: Re: Help needed for pccard.conf Message-ID: <380916230.962005799933.JavaMail.root@web304-mc.mail.com>
index | next in thread | raw e-mail
Thank you for your respond,
The output of pccardc dumpcis ia as follow:-
Code 135 not found
Code 135 not found
code Unknown ignored
Configuration data for card in slot 0
Tuple #1, code = 0x1 (Common memory descriptor), length = 2
000: 00 ff
Common memory device information:
Device number 1, type No device, WPS = OFF
Speed = No speed, Memory block size = reserved, 32 units
Tuple #2, code = 0x15 (Version 1 info), length = 48
000: 05 00 50 43 4d 43 49 41 20 20 00 35 36 4b 20 56
010: 2e 39 30 20 46 61 78 20 4d 6f 64 65 6d 20 28 4c
020: 4b 29 20 20 00 46 4d 35 36 30 4c 4b 20 20 00 ff
Version = 5.0, Manuf = [PCMCIA ],card vers = [56K V.90 Fax Modem (LK) ]
Addit. info = [FM560LK ]
Tuple #3, code = 0x20 (Manufacturer ID), length = 4
000: 75 01 00 00
PCMCIA ID = 0x175, OEM ID = 0x0
Tuple #4, code = 0x21 (Functional ID), length = 2
000: 02 00
Serial port/modem
Tuple #5, code = 0x22 (Functional EXT), length = 4
000: 00 02 0f 5c
Serial interface extension:
16550 UART, Parity - Space,Mark,Odd,Even,
Tuple #6, code = 0x22 (Functional EXT), length = 9
000: 05 1f 1f 00 04 00 00 04 00
Modem interface capabilities:
Tuple #7, code = 0x22 (Functional EXT), length = 9
000: 06 1f 1f 00 04 00 00 04 00
Modem interface capabilities:
Tuple #8, code = 0x22 (Functional EXT), length = 12
000: 02 06 00 3f 1c 03 03 0f 07 00 01 b5
Data modem services available:
Tuple #9, code = 0x22 (Functional EXT), length = 8
000: 13 06 00 1f 00 02 00 b5
Tuple #10, code = 0x22 (Functional EXT), length = 8
000: 23 06 00 1f 00 02 00 b5
Tuple #11, code = 0x1a (Configuration map), length = 5
000: 01 27 80 ff 67
Reg len = 2, config register addr = 0xff80, last config = 0x27
Registers: XXX--XX-
Tuple #12, code = 0x1b (Configuration entry), length = 19
000: cf 41 99 79 55 3d 86 46 26 4c aa 60 f8 03 07 f0
010: bc 86 28
Config index = 0xf(default)
Interface byte = 0x41 (I/O) +RDY/-BSY active
Vcc pwr:
Nominal operating supply voltage: 5 x 1V
Continuous supply current: 3.5 x 10mA
Max current average over 1 second: 1 x 100mA, ext = 0x46
Max current average over 10 ms: 2 x 100mA
Power down supply current: 4.5 x 1mA
Card decodes 10 address lines, 8 Bit I/O only
I/O address # 1: block start = 0x3f8 block length = 0x8
IRQ modes: Level, Pulse, Shared
IRQs: 4 5 6 7 10 11 12 13 15
Max twin cards = 0
Misc attr: (Audio-BVD2) (Power down supported)
Tuple #13, code = 0x1b (Configuration entry), length = 7
000: 17 08 aa 60 f8 02 07
Config index = 0x17
Card decodes 10 address lines, 8 Bit I/O only
I/O address # 1: block start = 0x2f8 block length = 0x8
Tuple #14, code = 0x1b (Configuration entry), length = 7
000: 1f 08 aa 60 e8 03 07
Config index = 0x1f
Card decodes 10 address lines, 8 Bit I/O only
I/O address # 1: block start = 0x3e8 block length = 0x8
Tuple #15, code = 0x1b (Configuration entry), length = 7
000: 27 08 aa 60 e8 02 07
Config index = 0x27
Card decodes 10 address lines, 8 Bit I/O only
I/O address # 1: block start = 0x2e8 block length = 0x8
Tuple #16, code = 0x0 (Null tuple), length = 7
000: 41 45 49 23 37 a1 00
Tuple #17, code = 0x14 (No link), length = 0
Tuple #18, code = 0xff (Terminator), length = 0
Configuration data for card in slot 1
Tuple #1, code = 0x1 (Common memory descriptor), length = 2
000: d4 3a
Common memory device information:
Device number 1, type Function specific, WPS = OFF
Speed = 100nS, Memory block size = 8Kb, 8 units
Tuple #2, code = 0x10 (Checksum), length = 5
000: 07 00 e8 00 6f
Checksum from offset 7, length 232, value is 0x6f
Tuple #3, code = 0x17 (Attribute memory descriptor), length = 2
000: d4 3a
Attribute memory device information:
Device number 1, type Function specific, WPS = OFF
Speed = 100nS, Memory block size = 8Kb, 8 units
Tuple #4, code = 0x14 (No link), length = 0
Tuple #5, code = 0x20 (Manufacturer ID), length = 4
000: 04 01 01 00
PCMCIA ID = 0x104, OEM ID = 0x1
Tuple #6, code = 0x21 (Functional ID), length = 2
000: 02 01
Serial port/modem - POST initialize
Tuple #7, code = 0x22 (Functional EXT), length = 4
000: 00 02 0f 7f
Serial interface extension:
16550 UART, Parity - Space,Mark,Odd,Even,
Tuple #8, code = 0x15 (Version 1 info), length = 59
000: 04 01 53 6f 63 6b 65 74 20 43 6f 6d 6d 75 6e 69
010: 63 61 74 69 6f 6e 73 20 49 6e 63 00 53 65 72 69
020: 61 6c 20 50 6f 72 74 20 41 64 61 70 74 65 72 20
030: 52 65 76 69 73 69 6f 6e 20 42 00
Version = 4.1, Manuf = [Socket Communications Inc],card vers = [Serial Port Adapter Revision B]
Addit. info = [],[],[],[],[],[€],[ - ],[ ],[],[],[],[],[],[],[],[0],[]
Tuple #9, code = 0x1a (Configuration map), length = 5
000: 01 00 00 80 0f
Reg len = 2, config register addr = 0x8000, last config = 0x0
Registers: XXXX----
Tuple #10, code = 0x1b (Configuration entry), length = 19
000: c1 41 99 49 55 2d 54 23 30 ff ff 20 c1 05 43 4f
010: 4d 58 00
Config index = 0x1(default)
Interface byte = 0x41 (I/O) +RDY/-BSY active
Vcc pwr:
Nominal operating supply voltage: 5 x 1V
Continuous supply current: 2.5 x 10mA
Power down supply current: 5 x 1mA
Card decodes 3 address lines, 8 Bit I/O only
IRQ modes: Level
IRQ level = 3
Max twin cards = 0
Misc attr: (Read-only) (Power down supported)
Tuple #11, code = 0x1b (Configuration entry), length = 23
000: c3 41 99 49 55 2d 54 b0 60 f8 03 07 30 10 00 20
010: c1 05 43 4f 4d 31 00
Config index = 0x3(default)
Interface byte = 0x41 (I/O) +RDY/-BSY active
Vcc pwr:
Nominal operating supply voltage: 5 x 1V
Continuous supply current: 2.5 x 10mA
Power down supply current: 5 x 1mA
Card decodes 16 address lines, 8 Bit I/O only
I/O address # 1: block start = 0x3f8 block length = 0x8
IRQ modes: Level
IRQs: 4 5 12
Max twin cards = 0
Misc attr: (Power down supported)
Tuple #12, code = 0x1b (Configuration entry), length = 23
000: c5 41 99 49 55 2d 54 b0 60 f8 02 07 30 08 00 20
010: c1 05 43 4f 4d 32 00
Config index = 0x5(default)
Interface byte = 0x41 (I/O) +RDY/-BSY active
Vcc pwr:
Nominal operating supply voltage: 5 x 1V
Continuous supply current: 2.5 x 10mA
Power down supply current: 5 x 1mA
Card decodes 16 address lines, 8 Bit I/O only
I/O address # 1: block start = 0x2f8 block length = 0x8
IRQ modes: Level
IRQs: 4 5 11
Max twin cards = 0
Misc attr: (Power down supported)
Tuple #13, code = 0x1b (Configuration entry), length = 23
000: c7 41 99 49 55 2d 54 b0 60 e8 03 07 30 10 00 20
010: c1 05 43 4f 4d 33 00
Config index = 0x7(default)
Interface byte = 0x41 (I/O) +RDY/-BSY active
Vcc pwr:
Nominal operating supply voltage: 5 x 1V
Continuous supply current: 2.5 x 10mA
Power down supply current: 5 x 1mA
Card decodes 16 address lines, 8 Bit I/O only
I/O address # 1: block start = 0x3e8 block length = 0x8
IRQ modes: Level
IRQs: 4 5 12
Max twin cards = 0
Misc attr: (Power down supported)
Tuple #14, code = 0x1b (Configuration entry), length = 23
000: c9 41 99 49 55 2d 54 b0 60 e8 02 07 30 08 00 20
010: c1 05 43 4f 4d 34 00
Config index = 0x9(default)
Interface byte = 0x41 (I/O) +RDY/-BSY active
Vcc pwr:
Nominal operating supply voltage: 5 x 1V
Continuous supply current: 2.5 x 10mA
Power down supply current: 5 x 1mA
Card decodes 16 address lines, 8 Bit I/O only
I/O address # 1: block start = 0x2e8 block length = 0x8
IRQ modes: Level
IRQs: 4 5 11
Max twin cards = 0
Misc attr: (Power down supported)
Tuple #15, code = 0x1b (Configuration entry), length = 18
000: c0 40 e1 49 55 2d 54 48 01 80 00 20 c1 04 4d 45
010: 4d 00
Config index = 0x0(default)
Interface byte = 0x40 (memory) +RDY/-BSY active
Vcc pwr:
Nominal operating supply voltage: 5 x 1V
Continuous supply current: 2.5 x 10mA
Power down supply current: 5 x 1mA
Memory descriptor 1
blk length = 0x100 card addr = 0x8000
Max twin cards = 0
Misc attr: (Power down supported)
Tuple #16, code = 0xff (Terminator), length = 0
2 slots found
------Original Message------
From: Warner Losh <imp@village.org>
To: Arthur <chat@soon.com>
Sent: June 26, 2000 5:46:53 AM GMT
Subject: Re: Help needed for pccard.conf
In message <383725772.961989840264.JavaMail.root@web142-mc.mail.com> Arthur writes:
: Prolink v.90 pcmcia modem (model no.:1456c)
: Socket Communications Inc - Serial Port Adapter Revision B
:
: Thanking You in Advance
As root:
pccardc dumpcis
And send me the output. I'll then show you how to construct an
entry. Hmmm, maybe I'll turn this into a handbook section or Daemon
daily news piece.
Warner
______________________________________________
FREE Personalized Email at Mail.com
Sign up at http://www.mail.com/?sr=signup
To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-newbies" in the body of the message
home |
help
Want to link to this message? Use this
URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?380916230.962005799933.JavaMail.root>