Skip site navigation (1)Skip section navigation (2)
Date:      Thu, 11 Sep 2003 17:04:15 -0700
From:      Darcy Buskermolen <darcy@wavefire.com>
To:        freebsd-hackers@freebsd.org, freebsd-stable@FreeBSD.org
Subject:   ASUS P4P8x with Intel 865P chipset Boot problems
Message-ID:  <200309111704.15017.darcy@wavefire.com>

next in thread | raw e-mail | index | archive | help
I have just aquired a few systems based around ASUS P4P8x motherboard wit=
h=20
Intel 865P chipset. Attempt to install both 5.1-R and 4.8-20030810 snap h=
ave=20
failed. I've turned off every onboard device in the BIOS that is possible=
=2E

During the install of 5.1 the system hangs at
acpi_cpu0: throttling enabled: 8 steps (100% to 12.5%), currently 100%.
ad4: DMA limited to UDMA33, non ATA66 cable or device
ad4: 156334MB (Maxtor 6Y160L0) [3912632/16/63] at ata2-master UDMA33
acd0: DVD-ROM () at ata3-master UDMA33
Mounting root from UFS:/dev/md0


(at this point the system just sits here)
This drive has been tested in another system and does come up as UDMA100 =
on=20
this cable.

in 4.8 the system hangs at
sio0 at port 0x3f8-0x3ff Irq4 flags 0x10 on isa0
sio0: type 16550A
sio1: configured irq 3 not in bitmap or probed irqs 0
ppc0: parallel port not found

(at this point it's hung)

I'm available all day tomorrow to work through this problem if anybody ne=
eds=20
more information please let me know.  I'm assuming that this is a problem=
=20
with poor/no support for the 865P chipset . Also please cc me on response=
s as=20
that I'm not on -hackers

--=20
Darcy Buskermolen
Wavefire Technologies Corp.
ph: 250.717.0200
fx:  250.763.1759
http://www.wavefire.com



Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?200309111704.15017.darcy>