Date: Thu, 16 Jun 2005 13:40:11 -0300 (EST) From: <scuba@centroin.com.br> To: <freebsd-performance@freebsd.org> Cc: Bruce Evans <bde@zeta.org.au> Subject: Slave IDE HDD not working in UDMA5 Message-ID: <Pine.BSI.4.33.0506161330290.12086-100000@hypselo.centroin.com.br> In-Reply-To: <20050614213135.K38258@delplex.bde.org>
next in thread | previous in thread | raw e-mail | index | archive | help
Hi,
=09This was first posted on freebsd-question, but I could not find
the solution yet.
=09Maybe you could help me.
=09I=B4ve installed FreeBSD 5.4 on a new machine with the following
hardware:
=09Asus P4P800 SE (BIOS v. 1008)
=092GB RAM ( 4x 512 DDR400 )
=092 HDD Samsung SP0802N (80GB 7200rpm ata-100) 80 pins cable.
=09The HD were formated with newfs defaults, and the following
results were the same using both as master (primary e secondary) or with a
master / slave (same interface).
=09With diskinfo both performance are the same, but with "dd", the
second disc (the slave or the secondary master), is always worst as if it
were working in DMA2.
=09what should be the right results?
=09Here are the results:
=09DD: dd if=3D/dev/zero of=3DTEST count=3D1000 bs=3D64k
=09master: 60 Mb/s
=09slave: 16 Mb/s
=09The results with diskinfo (almost the same):
/dev/ad0
=09512 =09# sectorsize
=0980060424192 =09# mediasize in bytes (75G)
=09156368016 =09# mediasize in sectors
=09155127 =09# Cylinders according to firmware.
=0916 =09# Heads according to firmware.
=0963 =09# Sectors according to firmware.
Seek times:
=09Full stroke:=09 250 iter in 5.477568 sec =3D 21.910 msec
=09Half stroke:=09 250 iter in 4.140590 sec =3D 16.562 msec
=09Quarter stroke:=09 500 iter in 6.093340 sec =3D 12.187 msec
=09Short forward:=09 400 iter in 2.088111 sec =3D 5.220 msec
=09Short backward:=09 400 iter in 2.532713 sec =3D 6.332 msec
=09Seq outer:=09 2048 iter in 0.261596 sec =3D 0.128 msec
=09Seq inner:=09 2048 iter in 0.259723 sec =3D 0.127 msec
Transfer rates:
=09outside: 102400 kbytes in 1.743910 sec =3D 58719 kbytes/sec
=09middle: 102400 kbytes in 2.031982 sec =3D 50394 kbytes/sec
=09inside: 102400 kbytes in 3.354742 sec =3D 30524 kbytes/sec
=3D=3D=3D=3D=3D=3D=3D=3D=3D
/dev/ad1
=09512 =09# sectorsize
=0980060424192 =09# mediasize in bytes (75G)
=09156368016 =09# mediasize in sectors
=09155127 =09# Cylinders according to firmware.
=0916 =09# Heads according to firmware.
=0963 =09# Sectors according to firmware.
Seek times:
=09Full stroke:=09 250 iter in 5.431290 sec =3D 21.725 msec
=09Half stroke:=09 250 iter in 4.111275 sec =3D 16.445 msec
=09Quarter stroke:=09 500 iter in 6.282551 sec =3D 12.565 msec
=09Short forward:=09 400 iter in 1.741538 sec =3D 4.354 msec
=09Short backward:=09 400 iter in 3.285028 sec =3D 8.213 msec
=09Seq outer:=09 2048 iter in 0.259503 sec =3D 0.127 msec
=09Seq inner:=09 2048 iter in 0.258212 sec =3D 0.126 msec
Transfer rates:
=09outside: 102400 kbytes in 1.720602 sec =3D 59514 kbytes/sec
=09middle: 102400 kbytes in 1.998063 sec =3D 51250 kbytes/sec
=09inside: 102400 kbytes in 3.235904 sec =3D 31645 kbytes/sec
- Marcelo
Here is the verbose dmesg.boot:
Copyright (c) 1992-2004 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
=09The Regents of the University of California. All rights reserved.
FreeBSD 5.3-RELEASE #0: Fri Nov 5 04:19:18 UTC 2004
root@harlow.cse.buffalo.edu:/usr/obj/usr/src/sys/GENERIC
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: Intel(R) Pentium(R) 4 CPU 3.00GHz (3006.83-MHz 686-class CPU)
Origin =3D "GenuineIntel" Id =3D 0xf41 Stepping =3D 1
Features=3D0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PG=
E,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
Hyperthreading: 2 logical CPUs
real memory =3D 2147155968 (2047 MB)
avail memory =3D 2095681536 (1998 MB)
ACPI APIC Table: <A M I OEMAPIC >
ioapic0: Changing APIC ID to 2
ioapic0 <Version 2.0> irqs 0-23 on motherboard
npx0: [FAST]
npx0: <math processor> on motherboard
npx0: INT 16 interface
acpi0: <A M I OEMRSDT> on motherboard
acpi0: Power Button (fixed)
Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0
cpu0: <ACPI CPU> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
agp0: <Intel 82865 host to AGP bridge> mem 0xf8000000-0xfbffffff at device =
0.0 on pci0
pcib1: <ACPI PCI-PCI bridge> at device 1.0 on pci0
pcib1: could not get PCI interrupt routing table for \\_SB_.PCI0.P0P1 - AE_=
NOT_FOUND
pci1: <ACPI PCI bus> on pcib1
uhci0: <Intel 82801EB (ICH5) USB controller USB-A> port 0xef00-0xef1f irq 1=
6 at device 29.0 on pci0
uhci0: [GIANT-LOCKED]
usb0: <Intel 82801EB (ICH5) USB controller USB-A> on uhci0
usb0: USB revision 1.0
uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhci1: <Intel 82801EB (ICH5) USB controller USB-B> port 0xef20-0xef3f irq 1=
9 at device 29.1 on pci0
uhci1: [GIANT-LOCKED]
usb1: <Intel 82801EB (ICH5) USB controller USB-B> on uhci1
usb1: USB revision 1.0
uhub1: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
uhci2: <Intel 82801EB (ICH5) USB controller USB-C> port 0xef40-0xef5f irq 1=
8 at device 29.2 on pci0
uhci2: [GIANT-LOCKED]
usb2: <Intel 82801EB (ICH5) USB controller USB-C> on uhci2
usb2: USB revision 1.0
uhub2: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub2: 2 ports with 2 removable, self powered
uhci3: <Intel 82801EB (ICH5) USB controller USB-D> port 0xef80-0xef9f irq 1=
6 at device 29.3 on pci0
uhci3: [GIANT-LOCKED]
usb3: <Intel 82801EB (ICH5) USB controller USB-D> on uhci3
usb3: USB revision 1.0
uhub3: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub3: 2 ports with 2 removable, self powered
pci0: <serial bus, USB> at device 29.7 (no driver attached)
pcib2: <ACPI PCI-PCI bridge> at device 30.0 on pci0
pci2: <ACPI PCI bus> on pcib2
skc0: <Marvell Gigabit Ethernet> port 0xd800-0xd8ff mem 0xfeadc000-0xfeadff=
ff irq 22 at device 5.0 on pci2
skc0: Yukon Gigabit Ethernet 10/100/1000Base-T Adapter
sk0: <Marvell Semiconductor, Inc. Yukon> on skc0
sk0: Ethernet address: 00:11:d8:86:8f:7d
miibus0: <MII bus> on sk0
e1000phy0: <Marvell 88E1000 Gigabit PHY> on miibus0
e1000phy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseTX-FDX,=
auto
pci2: <display, VGA> at device 13.0 (no driver attached)
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel ICH5 UDMA100 controller> port 0xfc00-0xfc0f,0x376,0x170-0x1=
77,0x3f6,0x1f0-0x1f7 at device 31.1 on pci0
ata0: channel #0 on atapci0
ata1: channel #1 on atapci0
pci0: <serial bus, SMBus> at device 31.3 (no driver attached)
pci0: <multimedia, audio> at device 31.5 (no driver attached)
acpi_button0: <Power Button> on acpi0
atkbdc0: <Keyboard controller (i8042)> port 0x64,0x60 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
sio0: <16550A-compatible COM port> port 0x3f8-0x3ff irq 4 flags 0x10 on acp=
i0
sio0: type 16550A
sio1: <16550A-compatible COM port> port 0x2f8-0x2ff irq 3 on acpi0
sio1: type 16550A
fdc0: <floppy drive controller (FDE)> port 0x3f7,0x3f0-0x3f5 irq 6 drq 2 on=
acpi0
fdc0: [FAST]
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
orm0: <ISA Option ROM> at iomem 0xc0000-0xc7fff on isa0
pmtimer0 on isa0
ppc0: parallel port not found.
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=3D0x300>
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
Timecounter "TSC" frequency 3006832650 Hz quality 800
Timecounters tick every 10.000 msec
ad0: 76351MB <SAMSUNG SP0802N/TK200-04> [155127/16/63] at ata0-master UDMA1=
00
ad1: 76351MB <SAMSUNG SP0802N/TK200-04> [155127/16/63] at ata0-slave UDMA10=
0
acd0: CDROM <GCR-8523B/1.03> at ata1-master PIO4
Mounting root from ufs:/dev/ad0s1a
Waiting (max 60 seconds) for system process `vnlru' to stop...done
Waiting (max 60 seconds) for system process `bufdaemon' to stop...done
Waiting (max 60 seconds) for system process `syncer' to stop...
Syncing disks, vnodes remaining...1 1 1 0 0 0 done
No buffers busy after final sync
Copyright (c) 1992-2004 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
=09The Regents of the University of California. All rights reserved.
FreeBSD 5.3-RELEASE #0: Fri Nov 5 04:19:18 UTC 2004
root@harlow.cse.buffalo.edu:/usr/obj/usr/src/sys/GENERIC
Preloaded elf kernel "/boot/kernel/kernel" at 0xc0a23000.
Preloaded elf module "/boot/kernel/acpi.ko" at 0xc0a2321c.
Calibrating clock(s) ... i8254 clock: 1193205 Hz
CLK_USE_I8254_CALIBRATION not specified - using default frequency
Timecounter "i8254" frequency 1193182 Hz quality 0
Calibrating TSC clock ... TSC clock: 3006830917 Hz
CPU: Intel(R) Pentium(R) 4 CPU 3.00GHz (3006.83-MHz 686-class CPU)
Origin =3D "GenuineIntel" Id =3D 0xf41 Stepping =3D 1
Features=3D0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PG=
E,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
Hyperthreading: 2 logical CPUs
real memory =3D 2147155968 (2047 MB)
Physical memory chunk(s):
0x0000000000001000 - 0x000000000009efff, 647168 bytes (158 pages)
0x0000000000100000 - 0x00000000003fffff, 3145728 bytes (768 pages)
0x0000000000c26000 - 0x000000007db80fff, 2096476160 bytes (511835 pages)
avail memory =3D 2095681536 (1998 MB)
Table 'FACP' at 0x7ffb0200
Table 'APIC' at 0x7ffb0390
MADT: Found table at 0x7ffb0390
MP Configuration Table version 1.1 found at 0xc00f1250
APIC: Using the MADT enumerator.
MADT: Found CPU APIC ID 0 ACPI ID 1: enabled
MADT: Found CPU APIC ID 1 ACPI ID 2: enabled
ACPI APIC Table: <A M I OEMAPIC >
bios32: Found BIOS32 Service Directory header at 0xc00f0000
bios32: Entry =3D 0xf0010 (c00f0010) Rev =3D 0 Len =3D 1
pcibios: PCI BIOS entry at 0xf0000+0x31
pnpbios: Found PnP BIOS data at 0xc00f5f10
pnpbios: Entry =3D f0000:6afa Rev =3D 1.0
Other BIOS signatures found:
APIC: CPU 0 has ACPI ID 1
MADT: Found IO APIC ID 2, Interrupt 0 at 0xfec00000
ioapic0: Changing APIC ID to 2
ioapic0: Routing external 8259A's -> intpin 0
ioapic0: intpin 0 -> ExtINT (edge, high)
ioapic0: intpin 1 -> ISA IRQ 1 (edge, high)
ioapic0: intpin 2 -> ISA IRQ 2 (edge, high)
ioapic0: intpin 3 -> ISA IRQ 3 (edge, high)
ioapic0: intpin 4 -> ISA IRQ 4 (edge, high)
ioapic0: intpin 5 -> ISA IRQ 5 (edge, high)
ioapic0: intpin 6 -> ISA IRQ 6 (edge, high)
ioapic0: intpin 7 -> ISA IRQ 7 (edge, high)
ioapic0: intpin 8 -> ISA IRQ 8 (edge, high)
ioapic0: intpin 9 -> ISA IRQ 9 (edge, high)
ioapic0: intpin 10 -> ISA IRQ 10 (edge, high)
ioapic0: intpin 11 -> ISA IRQ 11 (edge, high)
ioapic0: intpin 12 -> ISA IRQ 12 (edge, high)
ioapic0: intpin 13 -> ISA IRQ 13 (edge, high)
ioapic0: intpin 14 -> ISA IRQ 14 (edge, high)
ioapic0: intpin 15 -> ISA IRQ 15 (edge, high)
ioapic0: intpin 16 -> PCI IRQ 16 (level, low)
ioapic0: intpin 17 -> PCI IRQ 17 (level, low)
ioapic0: intpin 18 -> PCI IRQ 18 (level, low)
ioapic0: intpin 19 -> PCI IRQ 19 (level, low)
ioapic0: intpin 20 -> PCI IRQ 20 (level, low)
ioapic0: intpin 21 -> PCI IRQ 21 (level, low)
ioapic0: intpin 22 -> PCI IRQ 22 (level, low)
ioapic0: intpin 23 -> PCI IRQ 23 (level, low)
MADT: intr override: source 0, irq 2
ioapic0: Routing IRQ 0 -> intpin 2
ioapic0: intpin 2 trigger: edge
ioapic0: intpin 2 polarity: high
MADT: intr override: source 9, irq 9
ioapic0: intpin 9 trigger: level
ioapic0: intpin 9 polarity: high
ioapic0 <Version 2.0> irqs 0-23 on motherboard
cpu0 BSP:
ID: 0x00000000 VER: 0x00050014 LDR: 0x01000000 DFR: 0x0fffffff
lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000001ff
wlan: <802.11 Link Layer>
random: <entropy source, Software, Yarrow>
io: <I/O>
mem: <memory>
Pentium Pro MTRR support enabled
null: <null device, zero device>
npx0: [FAST]
npx0: <math processor> on motherboard
npx0: INT 16 interface
acpi0: <A M I OEMRSDT> on motherboard
acpi0: [MPSAFE]
pci_open(1):=09mode 1 addr port (0x0cf8) is 0x80000090
pci_open(1a):=09mode1res=3D0x80000000 (0x80000000)
pci_cfgcheck:=09device 0 [class=3D060000] [hdr=3D00] is there (id=3D2570808=
6)
pcibios: BIOS version 2.10
Found $PIR table, 14 entries at 0xc00f5db0
PCI-Only Interrupts: none
Location Bus Device Pin Link IRQs
embedded 2 8 A 0x68 3 4 5 6 7 10 11 12 14 15
embedded 0 31 A 0x62 3 4 5 6 7 10 11 12 14 15
embedded 0 31 B 0x61 3 4 5 6 7 10 11 12 14 15
embedded 0 29 A 0x60 3 4 5 6 7 10 11 12 14 15
embedded 0 29 B 0x63 3 4 5 6 7 10 11 12 14 15
embedded 0 29 C 0x62 3 4 5 6 7 10 11 12 14 15
embedded 0 29 D 0x6b 3 4 5 6 7 10 11 12 14 15
embedded 0 1 A 0x60 3 4 5 6 7 10 11 12 14 15
embedded 0 1 B 0x61 3 4 5 6 7 10 11 12 14 15
embedded 0 3 D 0x63 3 4 5 6 7 10 11 12 14 15
embedded 0 1 A 0x62 3 4 5 6 7 10 11 12 14 15
slot 1 2 9 A 0x69 3 4 5 6 7 10 11 12 14 15
slot 1 2 9 B 0x6a 3 4 5 6 7 10 11 12 14 15
slot 1 2 9 C 0x6b 3 4 5 6 7 10 11 12 14 15
slot 1 2 9 D 0x68 3 4 5 6 7 10 11 12 14 15
slot 2 2 10 A 0x6a 3 4 5 6 7 10 11 12 14 15
slot 2 2 10 B 0x6b 3 4 5 6 7 10 11 12 14 15
slot 2 2 10 C 0x68 3 4 5 6 7 10 11 12 14 15
slot 2 2 10 D 0x69 3 4 5 6 7 10 11 12 14 15
slot 3 2 11 A 0x6b 3 4 5 6 7 10 11 12 14 15
slot 3 2 11 B 0x68 3 4 5 6 7 10 11 12 14 15
slot 3 2 11 C 0x69 3 4 5 6 7 10 11 12 14 15
slot 3 2 11 D 0x6a 3 4 5 6 7 10 11 12 14 15
slot 4 2 12 A 0x68 3 4 5 6 7 10 11 12 14 15
slot 4 2 12 B 0x69 3 4 5 6 7 10 11 12 14 15
slot 4 2 12 C 0x6a 3 4 5 6 7 10 11 12 14 15
slot 4 2 12 D 0x6b 3 4 5 6 7 10 11 12 14 15
slot 5 2 13 A 0x69 3 4 5 6 7 10 11 12 14 15
slot 5 2 13 B 0x6a 3 4 5 6 7 10 11 12 14 15
slot 5 2 13 C 0x6b 3 4 5 6 7 10 11 12 14 15
slot 5 2 13 D 0x68 3 4 5 6 7 10 11 12 14 15
embedded 2 3 A 0x68 3 4 5 6 7 10 11 12 14 15
embedded 2 4 A 0x6b 3 4 5 6 7 10 11 12 14 15
embedded 2 5 A 0x6a 3 4 5 6 7 10 11 12 14 15
AcpiOsDerivePciId: bus 0 dev 31 func 1
AcpiOsDerivePciId: bus 0 dev 31 func 2
AcpiOsDerivePciId: bus 0 dev 31 func 0
acpi0: Power Button (fixed)
ACPI timer looks GOOD min =3D 3, max =3D 3, width =3D 0
ACPI timer looks GOOD min =3D 3, max =3D 3, width =3D 0
ACPI timer looks GOOD min =3D 3, max =3D 3, width =3D 0
ACPI timer looks GOOD min =3D 3, max =3D 3, width =3D 0
ACPI timer looks GOOD min =3D 3, max =3D 3, width =3D 0
ACPI timer looks GOOD min =3D 3, max =3D 3, width =3D 0
ACPI timer looks GOOD min =3D 3, max =3D 3, width =3D 0
ACPI timer looks GOOD min =3D 3, max =3D 3, width =3D 0
ACPI timer looks GOOD min =3D 3, max =3D 3, width =3D 0
ACPI timer looks GOOD min =3D 3, max =3D 3, width =3D 0
Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0
unknown: not probed (disabled)
cpu0: <ACPI CPU> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
ACPI PCI link initial configuration:
pci0: <ACPI PCI bus> on pcib0
pci0: physical bus=3D0
=09map[10]: type 3, range 32, base f8000000, size 26, enabled
found->=09vendor=3D0x8086, dev=3D0x2570, revid=3D0x02
=09bus=3D0, slot=3D0, func=3D0
=09class=3D06-00-00, hdrtype=3D0x00, mfdev=3D0
=09cmdreg=3D0x0006, statreg=3D0x2090, cachelnsz=3D0 (dwords)
=09lattimer=3D0x00 (0 ns), mingnt=3D0x00 (0 ns), maxlat=3D0x00 (0 ns)
found->=09vendor=3D0x8086, dev=3D0x2571, revid=3D0x02
=09bus=3D0, slot=3D1, func=3D0
=09class=3D06-04-00, hdrtype=3D0x01, mfdev=3D0
=09cmdreg=3D0x0106, statreg=3D0x00a0, cachelnsz=3D0 (dwords)
=09lattimer=3D0x40 (1920 ns), mingnt=3D0x00 (0 ns), maxlat=3D0x00 (0 ns)
=09map[20]: type 4, range 32, base 0000ef00, size 5, enabled
pcib0: matched entry for 0.29.INTA
pcib0: slot 29 INTA hardwired to IRQ 16
found->=09vendor=3D0x8086, dev=3D0x24d2, revid=3D0x02
=09bus=3D0, slot=3D29, func=3D0
=09class=3D0c-03-00, hdrtype=3D0x00, mfdev=3D1
=09cmdreg=3D0x0005, statreg=3D0x0280, cachelnsz=3D0 (dwords)
=09lattimer=3D0x00 (0 ns), mingnt=3D0x00 (0 ns), maxlat=3D0x00 (0 ns)
=09intpin=3Da, irq=3D16
=09map[20]: type 4, range 32, base 0000ef20, size 5, enabled
pcib0: matched entry for 0.29.INTB
pcib0: slot 29 INTB hardwired to IRQ 19
found->=09vendor=3D0x8086, dev=3D0x24d4, revid=3D0x02
=09bus=3D0, slot=3D29, func=3D1
=09class=3D0c-03-00, hdrtype=3D0x00, mfdev=3D0
=09cmdreg=3D0x0005, statreg=3D0x0280, cachelnsz=3D0 (dwords)
=09lattimer=3D0x00 (0 ns), mingnt=3D0x00 (0 ns), maxlat=3D0x00 (0 ns)
=09intpin=3Db, irq=3D19
=09map[20]: type 4, range 32, base 0000ef40, size 5, enabled
pcib0: matched entry for 0.29.INTC
pcib0: slot 29 INTC hardwired to IRQ 18
found->=09vendor=3D0x8086, dev=3D0x24d7, revid=3D0x02
=09bus=3D0, slot=3D29, func=3D2
=09class=3D0c-03-00, hdrtype=3D0x00, mfdev=3D0
=09cmdreg=3D0x0005, statreg=3D0x0280, cachelnsz=3D0 (dwords)
=09lattimer=3D0x00 (0 ns), mingnt=3D0x00 (0 ns), maxlat=3D0x00 (0 ns)
=09intpin=3Dc, irq=3D18
=09map[20]: type 4, range 32, base 0000ef80, size 5, enabled
pcib0: matched entry for 0.29.INTA
pcib0: slot 29 INTA hardwired to IRQ 16
found->=09vendor=3D0x8086, dev=3D0x24de, revid=3D0x02
=09bus=3D0, slot=3D29, func=3D3
=09class=3D0c-03-00, hdrtype=3D0x00, mfdev=3D0
=09cmdreg=3D0x0005, statreg=3D0x0280, cachelnsz=3D0 (dwords)
=09lattimer=3D0x00 (0 ns), mingnt=3D0x00 (0 ns), maxlat=3D0x00 (0 ns)
=09intpin=3Da, irq=3D16
=09map[10]: type 1, range 32, base febffc00, size 10, enabled
pcib0: matched entry for 0.29.INTD
pcib0: slot 29 INTD hardwired to IRQ 23
found->=09vendor=3D0x8086, dev=3D0x24dd, revid=3D0x02
=09bus=3D0, slot=3D29, func=3D7
=09class=3D0c-03-20, hdrtype=3D0x00, mfdev=3D0
=09cmdreg=3D0x0106, statreg=3D0x0290, cachelnsz=3D0 (dwords)
=09lattimer=3D0x00 (0 ns), mingnt=3D0x00 (0 ns), maxlat=3D0x00 (0 ns)
=09intpin=3Dd, irq=3D23
=09powerspec 2 supports D0 D3 current D0
found->=09vendor=3D0x8086, dev=3D0x244e, revid=3D0xc2
=09bus=3D0, slot=3D30, func=3D0
=09class=3D06-04-00, hdrtype=3D0x01, mfdev=3D0
=09cmdreg=3D0x0107, statreg=3D0x0080, cachelnsz=3D0 (dwords)
=09lattimer=3D0x00 (0 ns), mingnt=3D0x0a (2500 ns), maxlat=3D0x00 (0 ns)
found->=09vendor=3D0x8086, dev=3D0x24d0, revid=3D0x02
=09bus=3D0, slot=3D31, func=3D0
=09class=3D06-01-00, hdrtype=3D0x00, mfdev=3D1
=09cmdreg=3D0x000f, statreg=3D0x0280, cachelnsz=3D0 (dwords)
=09lattimer=3D0x00 (0 ns), mingnt=3D0x00 (0 ns), maxlat=3D0x00 (0 ns)
=09map[20]: type 4, range 32, base 0000fc00, size 4, enabled
found->=09vendor=3D0x8086, dev=3D0x24db, revid=3D0x02
=09bus=3D0, slot=3D31, func=3D1
=09class=3D01-01-8a, hdrtype=3D0x00, mfdev=3D0
=09cmdreg=3D0x0005, statreg=3D0x0280, cachelnsz=3D0 (dwords)
=09lattimer=3D0x00 (0 ns), mingnt=3D0x00 (0 ns), maxlat=3D0x00 (0 ns)
=09intpin=3Da, irq=3D255
=09map[20]: type 4, range 32, base 00000400, size 5, enabled
pcib0: matched entry for 0.31.INTB
pcib0: slot 31 INTB hardwired to IRQ 17
found->=09vendor=3D0x8086, dev=3D0x24d3, revid=3D0x02
=09bus=3D0, slot=3D31, func=3D3
=09class=3D0c-05-00, hdrtype=3D0x00, mfdev=3D0
=09cmdreg=3D0x0001, statreg=3D0x0280, cachelnsz=3D0 (dwords)
=09lattimer=3D0x00 (0 ns), mingnt=3D0x00 (0 ns), maxlat=3D0x00 (0 ns)
=09intpin=3Db, irq=3D17
=09map[10]: type 4, range 32, base 0000e800, size 8, enabled
=09map[14]: type 4, range 32, base 0000ee80, size 6, enabled
=09map[18]: type 1, range 32, base febff800, size 9, enabled
=09map[1c]: type 1, range 32, base febff400, size 8, enabled
pcib0: matched entry for 0.31.INTB
pcib0: slot 31 INTB hardwired to IRQ 17
found->=09vendor=3D0x8086, dev=3D0x24d5, revid=3D0x02
=09bus=3D0, slot=3D31, func=3D5
=09class=3D04-01-00, hdrtype=3D0x00, mfdev=3D0
=09cmdreg=3D0x0007, statreg=3D0x0290, cachelnsz=3D0 (dwords)
=09lattimer=3D0x00 (0 ns), mingnt=3D0x00 (0 ns), maxlat=3D0x00 (0 ns)
=09intpin=3Db, irq=3D17
=09powerspec 2 supports D0 D3 current D0
agp0: <Intel 82865 host to AGP bridge> mem 0xf8000000-0xfbffffff at device =
0.0 on pci0
agp0: Reserved 0x4000000 bytes for rid 0x10 type 3 at 0xf8000000
agp0: allocating GATT for aperture of size 64M
pcib1: <ACPI PCI-PCI bridge> at device 1.0 on pci0
pcib1: secondary bus 1
pcib1: subordinate bus 1
pcib1: I/O decode 0x0-0x0
pcib1: memory decode 0xfff00000-0xfffff
pcib1: prefetched decode 0xfff00000-0xfffff
pcib1: could not get PCI interrupt routing table for \\_SB_.PCI0.P0P1 - AE_=
NOT_FOUND
pci1: <ACPI PCI bus> on pcib1
pci1: physical bus=3D1
uhci0: <Intel 82801EB (ICH5) USB controller USB-A> port 0xef00-0xef1f irq 1=
6 at device 29.0 on pci0
uhci0: Reserved 0x20 bytes for rid 0x20 type 4 at 0xef00
uhci0: [GIANT-LOCKED]
usb0: <Intel 82801EB (ICH5) USB controller USB-A> on uhci0
usb0: USB revision 1.0
uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhci1: <Intel 82801EB (ICH5) USB controller USB-B> port 0xef20-0xef3f irq 1=
9 at device 29.1 on pci0
uhci1: Reserved 0x20 bytes for rid 0x20 type 4 at 0xef20
uhci1: [GIANT-LOCKED]
usb1: <Intel 82801EB (ICH5) USB controller USB-B> on uhci1
usb1: USB revision 1.0
uhub1: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
uhci2: <Intel 82801EB (ICH5) USB controller USB-C> port 0xef40-0xef5f irq 1=
8 at device 29.2 on pci0
uhci2: Reserved 0x20 bytes for rid 0x20 type 4 at 0xef40
uhci2: [GIANT-LOCKED]
usb2: <Intel 82801EB (ICH5) USB controller USB-C> on uhci2
usb2: USB revision 1.0
uhub2: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub2: 2 ports with 2 removable, self powered
uhci3: <Intel 82801EB (ICH5) USB controller USB-D> port 0xef80-0xef9f irq 1=
6 at device 29.3 on pci0
uhci3: Reserved 0x20 bytes for rid 0x20 type 4 at 0xef80
uhci3: [GIANT-LOCKED]
usb3: <Intel 82801EB (ICH5) USB controller USB-D> on uhci3
usb3: USB revision 1.0
uhub3: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub3: 2 ports with 2 removable, self powered
pci0: <serial bus, USB> at device 29.7 (no driver attached)
pcib2: <ACPI PCI-PCI bridge> at device 30.0 on pci0
pcib2: secondary bus 2
pcib2: subordinate bus 2
pcib2: I/O decode 0xd000-0xdfff
pcib2: memory decode 0xfea00000-0xfeafffff
pcib2: prefetched decode 0xfd900000-0xfe8fffff
pcib2: Subtractively decoded bridge.
ACPI PCI link initial configuration:
pci2: <ACPI PCI bus> on pcib2
pci2: physical bus=3D2
=09map[10]: type 1, range 32, base feadc000, size 14, enabled
pcib2: device (null) requested decoded memory range 0xfeadc000-0xfeadffff
=09map[14]: type 4, range 32, base 0000d800, size 8, enabled
pcib2: device (null) requested decoded I/O range 0xd800-0xd8ff
pcib2: matched entry for 2.5.INTA
pcib2: slot 5 INTA hardwired to IRQ 22
found->=09vendor=3D0x11ab, dev=3D0x4320, revid=3D0x13
=09bus=3D2, slot=3D5, func=3D0
=09class=3D02-00-00, hdrtype=3D0x00, mfdev=3D0
=09cmdreg=3D0x0117, statreg=3D0x02b0, cachelnsz=3D4 (dwords)
=09lattimer=3D0x40 (1920 ns), mingnt=3D0x17 (5750 ns), maxlat=3D0x1f (7750 =
ns)
=09intpin=3Da, irq=3D22
=09powerspec 2 supports D0 D1 D2 D3 current D0
=09map[10]: type 3, range 32, base fe000000, size 23, enabled
pcib2: device (null) requested decoded memory range 0xfe000000-0xfe7fffff
=09map[14]: type 1, range 32, base feaf0000, size 16, enabled
pcib2: device (null) requested decoded memory range 0xfeaf0000-0xfeafffff
=09map[18]: type 4, range 32, base 0000dc00, size 7, enabled
pcib2: device (null) requested decoded I/O range 0xdc00-0xdc7f
found->=09vendor=3D0x1039, dev=3D0x6326, revid=3D0x0b
=09bus=3D2, slot=3D13, func=3D0
=09class=3D03-00-00, hdrtype=3D0x00, mfdev=3D0
=09cmdreg=3D0x0007, statreg=3D0x0230, cachelnsz=3D0 (dwords)
=09lattimer=3D0x40 (1920 ns), mingnt=3D0x02 (500 ns), maxlat=3D0x00 (0 ns)
=09powerspec 1 supports D0 D2 D3 current D0
skc0: <Marvell Gigabit Ethernet> port 0xd800-0xd8ff mem 0xfeadc000-0xfeadff=
ff irq 22 at device 5.0 on pci2
skc0: Reserved 0x4000 bytes for rid 0x10 type 3 at 0xfeadc000
skc0: Yukon Gigabit Ethernet 10/100/1000Base-T Adapter
sk0: <Marvell Semiconductor, Inc. Yukon> on skc0
sk0: bpf attached
sk0: Ethernet address: 00:11:d8:86:8f:7d
miibus0: <MII bus> on sk0
e1000phy0: <Marvell 88E1000 Gigabit PHY> on miibus0
e1000phy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseTX-FDX,=
auto
skc0: [MPSAFE]
pci2: <display, VGA> at device 13.0 (no driver attached)
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel ICH5 UDMA100 controller> port 0xfc00-0xfc0f,0x376,0x170-0x1=
77,0x3f6,0x1f0-0x1f7 at device 31.1 on pci0
atapci0: Reserved 0x10 bytes for rid 0x20 type 4 at 0xfc00
ata0: channel #0 on atapci0
atapci0: Reserved 0x8 bytes for rid 0x10 type 4 at 0x1f0
atapci0: Reserved 0x1 bytes for rid 0x14 type 4 at 0x3f6
ata0: reset tp1 mask=3D03 ostat0=3D50 ostat1=3D50
ata0-master: stat=3D0x50 err=3D0x01 lsb=3D0x00 msb=3D0x00
ata0-slave: stat=3D0x50 err=3D0x01 lsb=3D0x00 msb=3D0x00
ata0: reset tp2 stat0=3D50 stat1=3D50 devices=3D0x3<ATA_SLAVE,ATA_MASTER>
ata0: [MPSAFE]
ata1: channel #1 on atapci0
atapci0: Reserved 0x8 bytes for rid 0x18 type 4 at 0x170
atapci0: Reserved 0x1 bytes for rid 0x1c type 4 at 0x376
ata1: reset tp1 mask=3D03 ostat0=3D50 ostat1=3D00
ata1-master: stat=3D0x00 err=3D0x01 lsb=3D0x14 msb=3D0xeb
ata1-slave: stat=3D0x00 err=3D0x04 lsb=3D0x00 msb=3D0x00
ata1: reset tp2 stat0=3D00 stat1=3D00 devices=3D0x4<ATAPI_MASTER>
ata1: [MPSAFE]
pci0: <serial bus, SMBus> at device 31.3 (no driver attached)
pci0: <multimedia, audio> at device 31.5 (no driver attached)
acpi_button0: <Power Button> on acpi0
atkbdc0: <Keyboard controller (i8042)> port 0x64,0x60 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
atkbd: the current kbd controller command byte 0065
atkbd: keyboard ID 0x41ab (2)
kbd0 at atkbd0
kbd0: atkbd0, AT 101/102 (2), config:0x0, flags:0x3d0000
atkbd0: [GIANT-LOCKED]
psm0: unable to allocate IRQ
unknown: not probed (disabled)
sio0: irq maps: 0x4001 0x4011 0x4001 0x4001
sio0: <16550A-compatible COM port> port 0x3f8-0x3ff irq 4 flags 0x10 on acp=
i0
sio0: type 16550A
sio1: irq maps: 0x4001 0x4009 0x4001 0x4001
sio1: <16550A-compatible COM port> port 0x2f8-0x2ff irq 3 on acpi0
sio1: type 16550A
fdc0: <floppy drive controller (FDE)> port 0x3f7,0x3f0-0x3f5 irq 6 drq 2 on=
acpi0
fdc0: ic_type 90 part_id 80
fdc0: [MPSAFE]
fdc0: [FAST]
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
unknown: not probed (disabled)
unknown: not probed (disabled)
unknown: not probed (disabled)
unknown: not probed (disabled)
unknown: not probed (disabled)
unknown: not probed (disabled)
unknown: not probed (disabled)
unknown: not probed (disabled)
ata: ata0 already exists; skipping it
ata: ata1 already exists; skipping it
atkbdc: atkbdc0 already exists; skipping it
fdc: fdc0 already exists; skipping it
sio: sio0 already exists; skipping it
sio: sio1 already exists; skipping it
Trying Read_Port at 203
Trying Read_Port at 243
Trying Read_Port at 283
Trying Read_Port at 2c3
Trying Read_Port at 303
Trying Read_Port at 343
Trying Read_Port at 383
Trying Read_Port at 3c3
ex_isa_identify()
unknown: status reg test failed ff
unknown: status reg test failed ff
unknown: status reg test failed ff
unknown: status reg test failed ff
unknown: status reg test failed ff
unknown: status reg test failed ff
ahc_isa_probe 13: ioport 0xdc00 alloc failed
sc: sc0 already exists; skipping it
vga: vga0 already exists; skipping it
isa_probe_children: disabling PnP devices
isa_probe_children: probing non-PnP devices
orm0: <ISA Option ROM> at iomem 0xc0000-0xc7fff on isa0
pmtimer0 on isa0
adv0: not probed (disabled)
aha0: not probed (disabled)
aic0: not probed (disabled)
bt0: not probed (disabled)
cs0: not probed (disabled)
ed0: not probed (disabled)
fe0: not probed (disabled)
ie0: not probed (disabled)
lnc0: not probed (disabled)
pcic0 failed to probe at port 0x3e0 iomem 0xd0000 on isa0
pcic1: not probed (disabled)
ppc0: parallel port not found.
ppc0: <Parallel port> failed to probe at irq 7 on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=3D0x300>
sc0: fb0, kbd0, terminal emulator: sc (syscons terminal)
sio2: not probed (disabled)
sio3: not probed (disabled)
sn0: not probed (disabled)
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
fb0: vga0, vga, type:VGA (5), flags:0x7007f
fb0: port:0x3c0-0x3df, crtc:0x3d4, mem:0xa0000 0x20000
fb0: init mode:24, bios mode:3, current mode:24
fb0: window:0xc00b8000 size:32k gran:32k, buf:0 size:32k
VGA parameters upon power-up
50 18 10 00 00 00 03 00 02 67 5f 4f 50 82 53 9f
bf 1f 00 4f 0d 0e 00 00 07 80 9b 8d 8f 28 1f 96
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff
VGA parameters in BIOS for mode 24
50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 53 9f
bf 1f 00 4f 0d 0e 00 00 00 00 9b 8d 8f 28 1f 96
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff
EGA/VGA parameters to be used for mode 24
50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 53 9f
bf 1f 00 4f 0d 0e 00 00 00 00 9b 8d 8f 28 1f 96
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff
vt0: not probed (disabled)
isa_probe_children: probing PnP devices
Device configuration finished.
Reducing kern.maxvnodes 134354 -> 100000
procfs registered
Timecounter "TSC" frequency 3006830917 Hz quality 800
Timecounters tick every 10.000 msec
lo0: bpf attached
ata0-slave: pio=3D0x0c wdma=3D0x22 udma=3D0x46 cable=3D80pin
ata0-master: pio=3D0x0c wdma=3D0x22 udma=3D0x46 cable=3D80pin
ata0-master: setting PIO4 on Intel ICH5 chip
ata0-master: setting UDMA100 on Intel ICH5 chip
ata0-slave: setting PIO4 on Intel ICH5 chip
ata0-slave: setting UDMA100 on Intel ICH5 chip
ad0: <SAMSUNG SP0802N/TK200-04> ATA-7 disk at ata0-master
ad0: 76351MB (156368016 sectors), 155127 C, 16 H, 63 S, 512 B
ad0: 16 secs/int, 1 depth queue, UDMA100
ar: FreeBSD check1 failed
ad1: <SAMSUNG SP0802N/TK200-04> ATA-7 disk at ata0-slave
ad1: 76351MB (156368016 sectors), 155127 C, 16 H, 63 S, 512 B
ad1: 16 secs/int, 1 depth queue, UDMA100
ar: FreeBSD check1 failed
ata1-master: pio=3D0x0c wdma=3D0x22 udma=3D0xffffffff cable=3D40pin
ata1-master: setting PIO4 on Intel ICH5 chip
acd0: <GCR-8523B/1.03> CDROM drive at ata1 as master
acd0: read 8937KB/s (8937KB/s), 128KB buffer, PIO4
acd0: Reads: CDR, CDRW, CDDA stream, packet
acd0: Writes:
acd0: Audio: play, 255 volume levels
acd0: Mechanism: ejectable tray, unlocked, lock protected
acd0: Medium: no/blank disc
ioapic0: routing intpin 1 (ISA IRQ 1) to cluster 0
ioapic0: routing intpin 3 (ISA IRQ 3) to cluster 0
ioapic0: routing intpin 4 (ISA IRQ 4) to cluster 0
ioapic0: routing intpin 6 (ISA IRQ 6) to cluster 0
ioapic0: routing intpin 8 (ISA IRQ 8) to cluster 0
ioapic0: routing intpin 9 (ISA IRQ 9) to cluster 0
ioapic0: routing intpin 13 (ISA IRQ 13) to cluster 0
ioapic0: routing intpin 14 (ISA IRQ 14) to cluster 0
ioapic0: routing intpin 15 (ISA IRQ 15) to cluster 0
ioapic0: routing intpin 16 (PCI IRQ 16) to cluster 0
ioapic0: routing intpin 18 (PCI IRQ 18) to cluster 0
ioapic0: routing intpin 19 (PCI IRQ 19) to cluster 0
ioapic0: routing intpin 22 (PCI IRQ 22) to cluster 0
GEOM: new disk ad0
GEOM: new disk ad1
[0] f:80 typ:165 s(CHS):0/1/1 e(CHS):1023/254/63 s:63 l:156360582
[1] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0
[2] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0
[3] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0
GEOM: Configure ad0s1, start 32256 length 80056617984 end 80056650239
[0] f:80 typ:165 s(CHS):0/1/1 e(CHS):1023/254/63 s:63 l:156360582
[1] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0
[2] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0
[3] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0
GEOM: Configure ad1s1, start 32256 length 80056617984 end 80056650239
GEOM: Configure ad0s1a, start 0 length 268435456 end 268435455
GEOM: Configure ad0s1b, start 268435456 length 4268032000 end 4536467455
GEOM: Configure ad0s1c, start 0 length 80056617984 end 80056617983
GEOM: Configure ad0s1d, start 4536467456 length 268435456 end 4804902911
GEOM: Configure ad0s1e, start 4804902912 length 268435456 end 5073338367
GEOM: Configure ad0s1f, start 5073338368 length 74983279616 end 80056617983
GEOM: Configure ad1s1c, start 0 length 80056617984 end 80056617983
GEOM: Configure ad1s1d, start 0 length 80056617984 end 80056617983
Mounting root from ufs:/dev/ad0s1a
start_init: trying /sbin/init
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?Pine.BSI.4.33.0506161330290.12086-100000>