Date: Thu, 7 Jan 2010 11:33:21 -0500 From: Steven Friedrich <freebsd@insightbb.com> To: freebsd-net@freebsd.org, Weongyo Jeong <weongyo@freebsd.org> Subject: Re: uath under FreeBSD 8.0-STABLE Message-ID: <201001071133.22131.freebsd@insightbb.com> In-Reply-To: <20100107033443.GK1491@weongyo> References: <201001061244.46700.freebsd@insightbb.com> <20100107033443.GK1491@weongyo>
next in thread | previous in thread | raw e-mail | index | archive | help
On Wednesday 06 January 2010 10:34:43 pm Weongyo Jeong wrote: > On Wed, Jan 06, 2010 at 12:44:46PM -0500, Steven Friedrich wrote: > > On Monday 04 January 2010 05:31:18 pm Weongyo Jeong wrote: > > > On Mon, Jan 04, 2010 at 03:57:56PM -0500, Steven Friedrich wrote: > > > > On Monday 04 January 2010 03:34:41 pm Weongyo Jeong wrote: > > > > > Could you please test with attached patch? Today the device I > > > > > ordered is delivered and I tried to test with it. One thing, it > > > > > looks weird, I noticed is that after uploading the firmware, > > > > > idProduct is increased not decreased. > > > > > > > > > > After patching, you should rebuild the module. > > > > > > > > I didn't get an attachment... > > > > > > Attached. > > > > > > regards, > > > Weongyo Jeong > > > > I had to place: > > # Firmware download for Netgear WG111T USB ethernet. > > attach 100 { > > match "vendor" "0x1385"; > > match "product" "0x4251"; > > action "/usr/sbin/uathload -d /dev/$device-name"; > > }; > > > > in /etc/devd.conf, but I later moved it to > > /usr/local/etc/devd/WG111T.conf > > > > Then it appeared in the ifconfig as uath0. > > > > But I get errors later when I run wpa_supplicant -B -i wlan0 -c > > /etc/wpa_supplicant.conf > > > > Those errors are: > > uath0: timeout waiting for reply to cmd 0x8 (8) > > uath0: could not start target, error 35 > > > > Your patch DOES work, AFAIK. > > I tested WPA test with my device today and it worked. Could you please > show me your wpa_supplicant.conf and commands? The following is my > configuration and command. > > # cat /etc/wpa_supplicant.conf > ctrl_interface=/var/run/wpa_supplicant > ctrl_interface_group=wheel > > network={ > ssid="wg" > bssid=00:08:XX:XX:XX:15 > proto=WPA > key_mgmt=WPA-PSK > pairwise=TKIP > group=TKIP > scan_ssid=1 > psk="XXXXXXXXXX" > } > > # uathload -d /dev/ugen1.2 > ugen1.2: <Atheros Communications Inc> at usbus1 (disconnected) > ugen1.2: <Athero Communications Inc> at usbus1 > uath0: <Atheros Communications Inc WG111T, rev 2.00/0.01, addr 2> on > usbus1 > # ifconfig wlan0 create wlandev uath0 > wlan0: Ethernet address: 00:1b:2f:XX:XX:ca > <s/modules/usb/uath]# wpa_supplicant -i wlan0 -c > /etc/wpa_supplicant.conf CTRL-EVENT-SCAN-RESULTS > Trying to associate with 00:08:XX:XX:XX:14 (SSID='wg' freq=2437 MHz) > Associated with 00:08:XX:XX:XX:14 > WPA: Key negotiation completed with 00:08:XX:XX:XX:14 [PTK=TKIP > GTK=TKIP] > CTRL-EVENT-CONNECTED - Connection to 00:08:XX:XX:XX:14 completed (auth) > [id=0 id_str=] > > regards, > Weongyo Jeong > > _______________________________________________ > freebsd-net@freebsd.org mailing list > http://lists.freebsd.org/mailman/listinfo/freebsd-net > To unsubscribe, send any mail to "freebsd-net-unsubscribe@freebsd.org" > Here's my /etc/wpa_supplicant.conf # ap_scan should be 2 when using ndis (bcmwl5_sys) driver, # 1 when using bwi, uath ap_scan=1 network={ bssid=00:xx:xx:xx:xx:50 ssid="FriedrichAir" scan_ssid=1 key_mgmt=WPA-PSK pairwise=TKIP group=TKIP proto=WPA WPA2 psk="xxxxxxxxxxxxxxxx" }
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?201001071133.22131.freebsd>