Date: Wed, 31 Dec 2014 16:24:30 +0100 (CET) From: "Jakob Alvermark" <jakob@alvermark.net> To: "Nathan Whitehorn" <nwhitehorn@freebsd.org> Cc: freebsd-current@freebsd.org Subject: Re: Acer E3-112 and UEFI Message-ID: <42818.213.113.68.53.1420039470.squirrel@webmail.alvermark.net> In-Reply-To: <54A2CC2D.3040105@freebsd.org> References: <20876.213.113.68.53.1419950410.squirrel@webmail.alvermark.net> <54A2CC2D.3040105@freebsd.org>
index | next in thread | previous in thread | raw e-mail
[-- Attachment #1 --] On Tue, December 30, 2014 17:00, Nathan Whitehorn wrote: > > On 12/30/14 06:40, Jakob Alvermark wrote: > >> Hi, >> >> >> Have been playing with this machine for a while now. >> It is a quad core Pentium N3540 (ValleyView/Bay Trail), 8 GB RAM. It >> came with a Broadcom WiFi card which I swapped for an Intel which is >> supported by FreeBSD. Also swapped the hard drive for an SSD. >> >> When first trying to boot FreeBSD with UEFI it would not boot. >> It stops after the loader is trying to start the kernel. >> My workaround now is using refind, http://www.rodsbooks.com/refind/ >> to set the screen resolution to 800x600. (Native is 1366x768) Only then >> will it boot using UEFI. I tried setting it to 1024x768, then it >> crashes. If it helps I can get the backtrace. > > [Not sure what's going on here] > > >> The other "interresting" thing is that when UEFI-booting the >> sdhci-controllers is not detected. (There are two, one card reader, and >> I >> guess one for internal eMMC that is not present in this model). >> >> Booting with legacy BIOS: >> # pciconf -l| grep sdhci >> sdhci_pci0@pci0:0:18:0: class=0x080501 card=0x09331025 chip=0x0f168086 >> rev=0x0e hdr=0x00 sdhci_pci1@pci0:0:23:0: class=0x080501 card=0x09331025 >> chip=0x0f508086 rev=0x0e hdr=0x00 >> >> Booting UEFI they are simply not there... >> > > At least sometimes, the CSM is involved in initializing some peripherals > (this happens with an isci(4) SAS controller I have, for example) and > disabling it will result in them not appearing. This is a BIOS bug, > unfortunately. > >> >> Also Xorg only works with BIOS. (Only VESA. I guess VESA drivers >> depends on BIOS? For proper X support I guess I have to wait for the >> Haswell >> drivers) > > You can use xf86-video-scfb for a VESA-like experience on EFI systems. > -Nathan Didn't know that. I tried it and it works, but as I said above I have to set the resolution to 800x600 to get it to boot, that's the resolution I get in X. Attached dmesg and the output of pciconf from both BIOS and UEFI booting. I noticed that when booting UEFI I get: real memory = 10737418240 (10240 MB) When it should be: real memory = 8589934592 (8192 MB) Strange? Jakob [-- Attachment #2 --] Copyright (c) 1992-2014 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD is a registered trademark of The FreeBSD Foundation. FreeBSD 11.0-CURRENT #9 r276456: Wed Dec 31 14:32:25 CET 2014 root@flyer:/usr/obj/usr/src/sys/FLYER amd64 FreeBSD clang version 3.4.1 (tags/RELEASE_34/dot1-final 208032) 20140512 VT: running with driver "vga". CPU: Intel(R) Pentium(R) CPU N3540 @ 2.16GHz (2166.72-MHz K8-class CPU) Origin="GenuineIntel" Id=0x30678 Family=0x6 Model=0x37 Stepping=8 Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> Features2=0x41d8e3bf<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,SSE4.1,SSE4.2,MOVBE,POPCNT,TSCDLT,RDRAND> AMD Features=0x28100800<SYSCALL,NX,RDTSCP,LM> AMD Features2=0x101<LAHF,Prefetch> Structured Extended Features=0x2282<TSCADJ,SMEP,ERMS> VT-x: PAT,HLT,MTF,PAUSE,EPT,UG,VPID TSC: P-state invariant, performance statistics real memory = 8589934592 (8192 MB) avail memory = 8107888640 (7732 MB) Event timer "LAPIC" quality 600 ACPI APIC Table: <ACRSYS ACRPRDCT> FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs FreeBSD/SMP: 1 package(s) x 4 core(s) cpu0 (BSP): APIC ID: 0 cpu1 (AP): APIC ID: 2 cpu2 (AP): APIC ID: 4 cpu3 (AP): APIC ID: 6 ioapic0: Changing APIC ID to 2 ioapic0 <Version 2.0> irqs 0-86 on motherboard Cuse v0.1.34 @ /dev/cuse random: entropy device infrastructure driver random: selecting highest priority adaptor <Dummy> kbd1 at kbdmux0 netmap: loaded module module_register_init: MOD_LOAD (vesa, 0xffffffff80e93b00, 0) error 19 random: SOFT: yarrow init() random: selecting highest priority adaptor <Yarrow> random: live provider: "Intel Secure Key RNG" vtvga0: <vt_vga driver> on motherboard acpi0: <ACRSYS ACRPRDCT> on motherboard acpi0: Power Button (fixed) unknown: I/O range not supported cpu0: <ACPI CPU> on acpi0 cpu1: <ACPI CPU> on acpi0 cpu2: <ACPI CPU> on acpi0 cpu3: <ACPI CPU> on acpi0 atrtc0: <AT realtime clock> port 0x70-0x77 on acpi0 atrtc0: Warning: Couldn't map I/O. Event timer "RTC" frequency 32768 Hz quality 0 hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff irq 8 on acpi0 Timecounter "HPET" frequency 14318180 Hz quality 950 Event timer "HPET" frequency 14318180 Hz quality 450 Event timer "HPET1" frequency 14318180 Hz quality 440 Event timer "HPET2" frequency 14318180 Hz quality 440 attimer0: <AT timer> port 0x40-0x43,0x50-0x53 irq 0 on acpi0 Timecounter "i8254" frequency 1193182 Hz quality 0 Event timer "i8254" frequency 1193182 Hz quality 100 Timecounter "ACPI-safe" frequency 3579545 Hz quality 850 acpi_timer0: <24-bit timer at 3.579545MHz> port 0x408-0x40b on acpi0 acpi_ec0: <Embedded Controller: GPE 0x18> port 0x62,0x66 on acpi0 pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 pcib0: Length mismatch for 3 range: 109fffff vs 10a00000 pci0: <ACPI PCI bus> on pcib0 vgapci0: <VGA-compatible display> port 0x2050-0x2057 mem 0x90000000-0x903fffff,0x80000000-0x8fffffff irq 16 at device 2.0 on pci0 vgapci0: Boot video device sdhci_pci0: <Generic SD HCI> mem 0x90921000-0x90921fff,0x90920000-0x90920fff irq 18 at device 18.0 on pci0 sdhci_pci0: 1 slot(s) allocated ahci0: <AHCI SATA controller> port 0x2048-0x204f,0x205c-0x205f,0x2040-0x2047,0x2058-0x205b,0x2020-0x203f mem 0x9091f000-0x9091f7ff irq 19 at device 19.0 on pci0 ahci0: AHCI v1.30 with 2 3Gbps ports, Port Multiplier not supported ahcich0: <AHCI channel> at channel 0 on ahci0 xhci0: <Intel Intel BayTrail USB 3.0 controller> mem 0x90900000-0x9090ffff irq 20 at device 20.0 on pci0 xhci0: 32 byte context size. xhci0: Port routing mask set to 0xffffffff usbus0 on xhci0 sdhci_pci1: <Generic SD HCI> mem 0x9091e000-0x9091efff,0x9091d000-0x9091dfff irq 23 at device 23.0 on pci0 sdhci_pci1: 1 slot(s) allocated mmc0: <MMC/SD bus> on sdhci_pci1 pci0: <encrypt/decrypt> at device 26.0 (no driver attached) hdac0: <Intel BayTrail HDA Controller> mem 0x90910000-0x90913fff irq 22 at device 27.0 on pci0 pcib1: <ACPI PCI-PCI bridge> irq 16 at device 28.0 on pci0 pci1: <ACPI PCI bus> on pcib1 pcib2: <ACPI PCI-PCI bridge> irq 17 at device 28.1 on pci0 pci2: <ACPI PCI bus> on pcib2 iwn0: <Intel Centrino Advanced 6235> mem 0x90600000-0x90601fff irq 17 at device 0.0 on pci2 pcib3: <ACPI PCI-PCI bridge> irq 18 at device 28.2 on pci0 pci3: <ACPI PCI bus> on pcib3 re0: <RealTek 8168/8111 B/C/CP/D/DP/E/F/G PCIe Gigabit Ethernet> port 0x1000-0x10ff mem 0x90500000-0x90500fff,0x90400000-0x90403fff irq 18 at device 0.0 on pci3 re0: Using 1 MSI-X message re0: ASPM disabled re0: Chip rev. 0x4c000000 re0: MAC rev. 0x00000000 miibus0: <MII bus> on re0 rgephy0: <RTL8251 1000BASE-T media interface> PHY 1 on miibus0 rgephy0: none, 10baseT, 10baseT-FDX, 10baseT-FDX-flow, 100baseTX, 100baseTX-FDX, 100baseTX-FDX-flow, 1000baseT-FDX, 1000baseT-FDX-master, 1000baseT-FDX-flow, 1000baseT-FDX-flow-master, auto, auto-flow re0: Using defaults for TSO: 65518/35/2048 re0: Ethernet address: c4:54:44:d6:95:39 001.000008 [2718] netmap_attach success for re0 tx 1/256 rx 1/256 queues/slots ehci0: <Intel BayTrail USB 2.0 controller> mem 0x90918000-0x909183ff irq 23 at device 29.0 on pci0 usbus1: waiting for BIOS to give up control usbus1: timed out waiting for BIOS usbus1: EHCI version 1.0 usbus1 on ehci0 isab0: <PCI-ISA bridge> at device 31.0 on pci0 isa0: <ISA bus> on isab0 acpi_button0: <Power Button> on acpi0 acpi_button1: <Sleep Button> on acpi0 acpi_acad0: <AC Adapter> on acpi0 battery0: <ACPI Control Method Battery> on acpi0 acpi_lid0: <Control Method Lid Switch> on acpi0 acpi_tz0: <Thermal Zone> on acpi0 atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0 atkbd0: <AT Keyboard> irq 1 on atkbdc0 kbd0 at atkbd0 atkbd0: [GIANT-LOCKED] psm0: <PS/2 Mouse> irq 12 on atkbdc0 psm0: [GIANT-LOCKED] psm0: model Synaptics Touchpad, device ID 0 ppc0: cannot reserve I/O port range uart0: <16550 or compatible> at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0 est0: <Enhanced SpeedStep Frequency Control> on cpu0 est1: <Enhanced SpeedStep Frequency Control> on cpu1 est2: <Enhanced SpeedStep Frequency Control> on cpu2 est3: <Enhanced SpeedStep Frequency Control> on cpu3 usbus0: 5.0Gbps Super Speed USB v3.0 ZFS filesystem version: 5 ZFS storage pool version: features support (5000) Timecounters tick every 1.000 msec usbus1: 480Mbps High Speed USB v2.0 ugen0.1: <0x8086> at usbus0 uhub0: <0x8086 XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0 ugen1.1: <Intel> at usbus1 uhub1: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus1 ada0 at ahcich0 bus 0 scbus0 target 0 lun 0 ada0: <KINGSTON SKC300S37A60G 524ABBF0> ATA-8 SATA 3.x device ada0: Serial Number 50026B724303F8A8 ada0: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes) ada0: Command Queueing enabled ada0: 57241MB (117231408 512 byte sectors: 16H 63S/T 16383C) ada0: Previously was known as ad4 uhub0: 7 ports with 7 removable, self powered ugen0.2: <vendor 0x05e3> at usbus0 uhub2: <vendor 0x05e3 USB2.0 Hub, class 9/0, rev 2.00/85.37, addr 1> on usbus0 uhub2: 4 ports with 3 removable, self powered sdhci_pci1-slot0: Controller timeout sdhci_pci1-slot0: ============== REGISTER DUMP ============== sdhci_pci1-slot0: Sys addr: 0x00000000 | Version: 0x00001002 sdhci_pci1-slot0: Blk size: 0x00000000 | Blk cnt: 0x00000000 sdhci_pci1-slot0: Argument: 0x00000000 | Trn mode: 0x00000000 sdhci_pci1-slot0: Present: 0x1fff0001 | Host ctl: 0x00000001 sdhci_pci1-slot0: Power: 0x00000000 | Blk gap: 0x00000080 sdhci_pci1-slot0: Wake-up: 0x00000000 | Clock: 0x0000fa07 sdhci_pci1-slot0: Timeout: 0x00000000 | Int stat: 0x00000000 sdhci_pci1-slot0: Int enab: 0x01ff00fb | Sig enab: 0x01ff00fb sdhci_pci1-slot0: AC12 err: 0x00000000 | Slot int: 0x00000000 sdhci_pci1-slot0: Caps: 0x446cc801 | Max curr: 0x00000000 sdhci_pci1-slot0: =========================================== ugen0.3: <vendor 0x8087> at usbus0 ugen0.4: <SunplusIT INC.> at usbus0 uhub1: 8 ports with 8 removable, self powered sdhci_pci1-slot0: Controller timeout sdhci_pci1-slot0: ============== REGISTER DUMP ============== sdhci_pci1-slot0: Sys addr: 0x00000000 | Version: 0x00001002 sdhci_pci1-slot0: Blk size: 0x00000000 | Blk cnt: 0x00000000 sdhci_pci1-slot0: Argument: 0x00000000 | Trn mode: 0x00000000 sdhci_pci1-slot0: Present: 0x1fff0001 | Host ctl: 0x00000001 sdhci_pci1-slot0: Power: 0x00000000 | Blk gap: 0x00000080 sdhci_pci1-slot0: Wake-up: 0x00000000 | Clock: 0x0000fa07 sdhci_pci1-slot0: Timeout: 0x00000000 | Int stat: 0x00000000 sdhci_pci1-slot0: Int enab: 0x01ff00fb | Sig enab: 0x01ff00fb sdhci_pci1-slot0: AC12 err: 0x00000000 | Slot int: 0x00000000 sdhci_pci1-slot0: Caps: 0x446cc801 | Max curr: 0x00000000 sdhci_pci1-slot0: =========================================== ugen1.2: <vendor 0x8087> at usbus1 uhub3: <vendor 0x8087 product 0x07e6, class 9/0, rev 2.00/0.14, addr 2> on usbus1 uhub3: 4 ports with 4 removable, self powered sdhci_pci1-slot0: Controller timeout sdhci_pci1-slot0: ============== REGISTER DUMP ============== sdhci_pci1-slot0: Sys addr: 0x00000000 | Version: 0x00001002 sdhci_pci1-slot0: Blk size: 0x00000000 | Blk cnt: 0x00000000 sdhci_pci1-slot0: Argument: 0x00000000 | Trn mode: 0x00000000 sdhci_pci1-slot0: Present: 0x1fff0001 | Host ctl: 0x00000001 sdhci_pci1-slot0: Power: 0x00000000 | Blk gap: 0x00000080 sdhci_pci1-slot0: Wake-up: 0x00000000 | Clock: 0x0000fa07 sdhci_pci1-slot0: Timeout: 0x00000000 | Int stat: 0x00000000 sdhci_pci1-slot0: Int enab: 0x01ff00fb | Sig enab: 0x01ff00fb sdhci_pci1-slot0: AC12 err: 0x00000000 | Slot int: 0x00000000 sdhci_pci1-slot0: Caps: 0x446cc801 | Max curr: 0x00000000 sdhci_pci1-slot0: =========================================== random: unblocking device. sdhci_pci1-slot0: Controller timeout sdhci_pci1-slot0: ============== REGISTER DUMP ============== sdhci_pci1-slot0: Sys addr: 0x00000000 | Version: 0x00001002 sdhci_pci1-slot0: Blk size: 0x00000000 | Blk cnt: 0x00000000 sdhci_pci1-slot0: Argument: 0x00000000 | Trn mode: 0x00000000 sdhci_pci1-slot0: Present: 0x1fff0001 | Host ctl: 0x00000001 sdhci_pci1-slot0: Power: 0x00000000 | Blk gap: 0x00000080 sdhci_pci1-slot0: Wake-up: 0x00000000 | Clock: 0x0000fa07 sdhci_pci1-slot0: Timeout: 0x00000000 | Int stat: 0x00000000 sdhci_pci1-slot0: Int enab: 0x01ff00fb | Sig enab: 0x01ff00fb sdhci_pci1-slot0: AC12 err: 0x00000000 | Slot int: 0x00000000 sdhci_pci1-slot0: Caps: 0x446cc801 | Max curr: 0x00000000 sdhci_pci1-slot0: =========================================== sdhci_pci1-slot0: Controller timeout sdhci_pci1-slot0: ============== REGISTER DUMP ============== sdhci_pci1-slot0: Sys addr: 0x00000000 | Version: 0x00001002 sdhci_pci1-slot0: Blk size: 0x00000000 | Blk cnt: 0x00000000 sdhci_pci1-slot0: Argument: 0x000001aa | Trn mode: 0x00000000 sdhci_pci1-slot0: Present: 0x1fff0001 | Host ctl: 0x00000001 sdhci_pci1-slot0: Power: 0x00000000 | Blk gap: 0x00000080 sdhci_pci1-slot0: Wake-up: 0x00000000 | Clock: 0x0000fa07 sdhci_pci1-slot0: Timeout: 0x00000000 | Int stat: 0x00000000 sdhci_pci1-slot0: Int enab: 0x01ff00fb | Sig enab: 0x01ff00fb sdhci_pci1-slot0: AC12 err: 0x00000000 | Slot int: 0x00000000 sdhci_pci1-slot0: Caps: 0x446cc801 | Max curr: 0x00000000 sdhci_pci1-slot0: =========================================== sdhci_pci1-slot0: Controller timeout sdhci_pci1-slot0: ============== REGISTER DUMP ============== sdhci_pci1-slot0: Sys addr: 0x00000000 | Version: 0x00001002 sdhci_pci1-slot0: Blk size: 0x00000000 | Blk cnt: 0x00000000 sdhci_pci1-slot0: Argument: 0x000001aa | Trn mode: 0x00000000 sdhci_pci1-slot0: Present: 0x1fff0001 | Host ctl: 0x00000001 sdhci_pci1-slot0: Power: 0x00000000 | Blk gap: 0x00000080 sdhci_pci1-slot0: Wake-up: 0x00000000 | Clock: 0x0000fa07 sdhci_pci1-slot0: Timeout: 0x00000000 | Int stat: 0x00000000 sdhci_pci1-slot0: Int enab: 0x01ff00fb | Sig enab: 0x01ff00fb sdhci_pci1-slot0: AC12 err: 0x00000000 | Slot int: 0x00000000 sdhci_pci1-slot0: Caps: 0x446cc801 | Max curr: 0x00000000 sdhci_pci1-slot0: =========================================== sdhci_pci1-slot0: Controller timeout sdhci_pci1-slot0: ============== REGISTER DUMP ============== sdhci_pci1-slot0: Sys addr: 0x00000000 | Version: 0x00001002 sdhci_pci1-slot0: Blk size: 0x00000000 | Blk cnt: 0x00000000 sdhci_pci1-slot0: Argument: 0x000001aa | Trn mode: 0x00000000 sdhci_pci1-slot0: Present: 0x1fff0001 | Host ctl: 0x00000001 sdhci_pci1-slot0: Power: 0x00000000 | Blk gap: 0x00000080 sdhci_pci1-slot0: Wake-up: 0x00000000 | Clock: 0x0000fa07 sdhci_pci1-slot0: Timeout: 0x00000000 | Int stat: 0x00000000 sdhci_pci1-slot0: Int enab: 0x01ff00fb | Sig enab: 0x01ff00fb sdhci_pci1-slot0: AC12 err: 0x00000000 | Slot int: 0x00000000 sdhci_pci1-slot0: Caps: 0x446cc801 | Max curr: 0x00000000 sdhci_pci1-slot0: =========================================== sdhci_pci1-slot0: Controller timeout sdhci_pci1-slot0: ============== REGISTER DUMP ============== sdhci_pci1-slot0: Sys addr: 0x00000000 | Version: 0x00001002 sdhci_pci1-slot0: Blk size: 0x00000000 | Blk cnt: 0x00000000 sdhci_pci1-slot0: Argument: 0x000001aa | Trn mode: 0x00000000 sdhci_pci1-slot0: Present: 0x1fff0001 | Host ctl: 0x00000001 sdhci_pci1-slot0: Power: 0x00000000 | Blk gap: 0x00000080 sdhci_pci1-slot0: Wake-up: 0x00000000 | Clock: 0x0000fa07 sdhci_pci1-slot0: Timeout: 0x00000000 | Int stat: 0x00000000 sdhci_pci1-slot0: Int enab: 0x01ff00fb | Sig enab: 0x01ff00fb sdhci_pci1-slot0: AC12 err: 0x00000000 | Slot int: 0x00000000 sdhci_pci1-slot0: Caps: 0x446cc801 | Max curr: 0x00000000 sdhci_pci1-slot0: =========================================== sdhci_pci1-slot0: Controller timeout sdhci_pci1-slot0: ============== REGISTER DUMP ============== sdhci_pci1-slot0: Sys addr: 0x00000000 | Version: 0x00001002 sdhci_pci1-slot0: Blk size: 0x00000000 | Blk cnt: 0x00000000 sdhci_pci1-slot0: Argument: 0x00000000 | Trn mode: 0x00000000 sdhci_pci1-slot0: Present: 0x1fff0001 | Host ctl: 0x00000001 sdhci_pci1-slot0: Power: 0x00000000 | Blk gap: 0x00000080 sdhci_pci1-slot0: Wake-up: 0x00000000 | Clock: 0x0000fa07 sdhci_pci1-slot0: Timeout: 0x00000000 | Int stat: 0x00000000 sdhci_pci1-slot0: Int enab: 0x01ff00fb | Sig enab: 0x01ff00fb sdhci_pci1-slot0: AC12 err: 0x00000000 | Slot int: 0x00000000 sdhci_pci1-slot0: Caps: 0x446cc801 | Max curr: 0x00000000 sdhci_pci1-slot0: =========================================== sdhci_pci1-slot0: Controller timeout sdhci_pci1-slot0: ============== REGISTER DUMP ============== sdhci_pci1-slot0: Sys addr: 0x00000000 | Version: 0x00001002 sdhci_pci1-slot0: Blk size: 0x00000000 | Blk cnt: 0x00000000 sdhci_pci1-slot0: Argument: 0x00000000 | Trn mode: 0x00000000 sdhci_pci1-slot0: Present: 0x1fff0001 | Host ctl: 0x00000001 sdhci_pci1-slot0: Power: 0x00000000 | Blk gap: 0x00000080 sdhci_pci1-slot0: Wake-up: 0x00000000 | Clock: 0x0000fa07 sdhci_pci1-slot0: Timeout: 0x00000000 | Int stat: 0x00000000 sdhci_pci1-slot0: Int enab: 0x01ff00fb | Sig enab: 0x01ff00fb sdhci_pci1-slot0: AC12 err: 0x00000000 | Slot int: 0x00000000 sdhci_pci1-slot0: Caps: 0x446cc801 | Max curr: 0x00000000 sdhci_pci1-slot0: =========================================== sdhci_pci1-slot0: Controller timeout sdhci_pci1-slot0: ============== REGISTER DUMP ============== sdhci_pci1-slot0: Sys addr: 0x00000000 | Version: 0x00001002 sdhci_pci1-slot0: Blk size: 0x00000000 | Blk cnt: 0x00000000 sdhci_pci1-slot0: Argument: 0x00000000 | Trn mode: 0x00000000 sdhci_pci1-slot0: Present: 0x1fff0001 | Host ctl: 0x00000001 sdhci_pci1-slot0: Power: 0x00000000 | Blk gap: 0x00000080 sdhci_pci1-slot0: Wake-up: 0x00000000 | Clock: 0x0000fa07 sdhci_pci1-slot0: Timeout: 0x00000000 | Int stat: 0x00000000 sdhci_pci1-slot0: Int enab: 0x01ff00fb | Sig enab: 0x01ff00fb sdhci_pci1-slot0: AC12 err: 0x00000000 | Slot int: 0x00000000 sdhci_pci1-slot0: Caps: 0x446cc801 | Max curr: 0x00000000 sdhci_pci1-slot0: =========================================== sdhci_pci1-slot0: Controller timeout sdhci_pci1-slot0: ============== REGISTER DUMP ============== sdhci_pci1-slot0: Sys addr: 0x00000000 | Version: 0x00001002 sdhci_pci1-slot0: Blk size: 0x00000000 | Blk cnt: 0x00000000 sdhci_pci1-slot0: Argument: 0x00000000 | Trn mode: 0x00000000 sdhci_pci1-slot0: Present: 0x1fff0001 | Host ctl: 0x00000001 sdhci_pci1-slot0: Power: 0x00000000 | Blk gap: 0x00000080 sdhci_pci1-slot0: Wake-up: 0x00000000 | Clock: 0x0000fa07 sdhci_pci1-slot0: Timeout: 0x00000000 | Int stat: 0x00000000 sdhci_pci1-slot0: Int enab: 0x01ff00fb | Sig enab: 0x01ff00fb sdhci_pci1-slot0: AC12 err: 0x00000000 | Slot int: 0x00000000 sdhci_pci1-slot0: Caps: 0x446cc801 | Max curr: 0x00000000 sdhci_pci1-slot0: =========================================== sdhci_pci1-slot0: Controller timeout sdhci_pci1-slot0: ============== REGISTER DUMP ============== sdhci_pci1-slot0: Sys addr: 0x00000000 | Version: 0x00001002 sdhci_pci1-slot0: Blk size: 0x00000000 | Blk cnt: 0x00000000 sdhci_pci1-slot0: Argument: 0x00000000 | Trn mode: 0x00000000 sdhci_pci1-slot0: Present: 0x1fff0001 | Host ctl: 0x00000001 sdhci_pci1-slot0: Power: 0x00000000 | Blk gap: 0x00000080 sdhci_pci1-slot0: Wake-up: 0x00000000 | Clock: 0x0000fa07 sdhci_pci1-slot0: Timeout: 0x00000000 | Int stat: 0x00000000 sdhci_pci1-slot0: Int enab: 0x01ff00fb | Sig enab: 0x01ff00fb sdhci_pci1-slot0: AC12 err: 0x00000000 | Slot int: 0x00000000 sdhci_pci1-slot0: Caps: 0x446cc801 | Max curr: 0x00000000 sdhci_pci1-slot0: =========================================== sdhci_pci1-slot0: Controller timeout sdhci_pci1-slot0: ============== REGISTER DUMP ============== sdhci_pci1-slot0: Sys addr: 0x00000000 | Version: 0x00001002 sdhci_pci1-slot0: Blk size: 0x00000000 | Blk cnt: 0x00000000 sdhci_pci1-slot0: Argument: 0x00000000 | Trn mode: 0x00000000 sdhci_pci1-slot0: Present: 0x1fff0001 | Host ctl: 0x00000001 sdhci_pci1-slot0: Power: 0x00000000 | Blk gap: 0x00000080 sdhci_pci1-slot0: Wake-up: 0x00000000 | Clock: 0x0000fa07 sdhci_pci1-slot0: Timeout: 0x00000000 | Int stat: 0x00000000 sdhci_pci1-slot0: Int enab: 0x01ff00fb | Sig enab: 0x01ff00fb sdhci_pci1-slot0: AC12 err: 0x00000000 | Slot int: 0x00000000 sdhci_pci1-slot0: Caps: 0x446cc801 | Max curr: 0x00000000 sdhci_pci1-slot0: =========================================== sdhci_pci1-slot0: Controller timeout sdhci_pci1-slot0: ============== REGISTER DUMP ============== sdhci_pci1-slot0: Sys addr: 0x00000000 | Version: 0x00001002 sdhci_pci1-slot0: Blk size: 0x00000000 | Blk cnt: 0x00000000 sdhci_pci1-slot0: Argument: 0x00000000 | Trn mode: 0x00000000 sdhci_pci1-slot0: Present: 0x1fff0001 | Host ctl: 0x00000001 sdhci_pci1-slot0: Power: 0x00000000 | Blk gap: 0x00000080 sdhci_pci1-slot0: Wake-up: 0x00000000 | Clock: 0x0000fa07 sdhci_pci1-slot0: Timeout: 0x00000000 | Int stat: 0x00000000 sdhci_pci1-slot0: Int enab: 0x01ff00fb | Sig enab: 0x01ff00fb sdhci_pci1-slot0: AC12 err: 0x00000000 | Slot int: 0x00000000 sdhci_pci1-slot0: Caps: 0x446cc801 | Max curr: 0x00000000 sdhci_pci1-slot0: =========================================== sdhci_pci1-slot0: Controller timeout sdhci_pci1-slot0: ============== REGISTER DUMP ============== sdhci_pci1-slot0: Sys addr: 0x00000000 | Version: 0x00001002 sdhci_pci1-slot0: Blk size: 0x00000000 | Blk cnt: 0x00000000 sdhci_pci1-slot0: Argument: 0x00000000 | Trn mode: 0x00000000 sdhci_pci1-slot0: Present: 0x1fff0001 | Host ctl: 0x00000001 sdhci_pci1-slot0: Power: 0x00000000 | Blk gap: 0x00000080 sdhci_pci1-slot0: Wake-up: 0x00000000 | Clock: 0x0000fa07 sdhci_pci1-slot0: Timeout: 0x00000000 | Int stat: 0x00000000 sdhci_pci1-slot0: Int enab: 0x01ff00fb | Sig enab: 0x01ff00fb sdhci_pci1-slot0: AC12 err: 0x00000000 | Slot int: 0x00000000 sdhci_pci1-slot0: Caps: 0x446cc801 | Max curr: 0x00000000 sdhci_pci1-slot0: =========================================== mmc0: No compatible cards found on bus hdacc0: <Realtek (0x0283) HDA CODEC> at cad 0 on hdac0 hdaa0: <Realtek (0x0283) Audio Function Group> at nid 1 on hdacc0 pcm0: <Realtek (0x0283) (Analog 2.0+HP/2.0)> at nid 20,33 and 18 on hdaa0 hdacc1: <Intel (0x2882) HDA CODEC> at cad 2 on hdac0 hdaa1: <Intel (0x2882) Audio Function Group> at nid 1 on hdacc1 pcm1: <Intel (0x2882) (HDMI/DP 8ch)> at nid 4 on hdaa1 SMP: AP CPU #3 Launched! SMP: AP CPU #1 Launched! SMP: AP CPU #2 Launched! Timecounter "TSC-low" frequency 1083359498 Hz quality 1000 Trying to mount root from zfs:flyer/ROOT/default []... wlan0: Ethernet address: 80:00:0b:5a:cd:23 iwn0: iwn_read_firmware: ucode rev=0x12a80601 iwn0: iwn_read_firmware: ucode rev=0x12a80601 ubt0: <vendor 0x8087 product 0x07da, class 224/1, rev 2.00/78.69, addr 2> on usbus0 WARNING: attempt to domain_add(bluetooth) after domainfinalize() WARNING: attempt to domain_add(netgraph) after domainfinalize() ubt0: ubt_bulk_read_callback:979: bulk-in transfer failed: USB_ERR_STALLED [-- Attachment #3 --] Copyright (c) 1992-2014 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD is a registered trademark of The FreeBSD Foundation. FreeBSD 11.0-CURRENT #9 r276456: Wed Dec 31 14:32:25 CET 2014 root@flyer:/usr/obj/usr/src/sys/FLYER amd64 FreeBSD clang version 3.4.1 (tags/RELEASE_34/dot1-final 208032) 20140512 VT: running with driver "efifb". CPU: Intel(R) Pentium(R) CPU N3540 @ 2.16GHz (2166.72-MHz K8-class CPU) Origin="GenuineIntel" Id=0x30678 Family=0x6 Model=0x37 Stepping=8 Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> Features2=0x41d8e3bf<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,SSE4.1,SSE4.2,MOVBE,POPCNT,TSCDLT,RDRAND> AMD Features=0x28100800<SYSCALL,NX,RDTSCP,LM> AMD Features2=0x101<LAHF,Prefetch> Structured Extended Features=0x2282<TSCADJ,SMEP,ERMS> VT-x: PAT,HLT,MTF,PAUSE,EPT,UG,VPID TSC: P-state invariant, performance statistics real memory = 10737418240 (10240 MB) avail memory = 8104067072 (7728 MB) Event timer "LAPIC" quality 600 ACPI APIC Table: <ACRSYS ACRPRDCT> FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs FreeBSD/SMP: 1 package(s) x 4 core(s) cpu0 (BSP): APIC ID: 0 cpu1 (AP): APIC ID: 2 cpu2 (AP): APIC ID: 4 cpu3 (AP): APIC ID: 6 ioapic0: Changing APIC ID to 2 ioapic0 <Version 2.0> irqs 0-86 on motherboard Cuse v0.1.34 @ /dev/cuse random: entropy device infrastructure driver random: selecting highest priority adaptor <Dummy> kbd1 at kbdmux0 netmap: loaded module module_register_init: MOD_LOAD (vesa, 0xffffffff80e93b00, 0) error 19 random: SOFT: yarrow init() random: selecting highest priority adaptor <Yarrow> random: live provider: "Intel Secure Key RNG" acpi0: <ACRSYS ACRPRDCT> on motherboard acpi0: Power Button (fixed) unknown: I/O range not supported cpu0: <ACPI CPU> on acpi0 cpu1: <ACPI CPU> on acpi0 cpu2: <ACPI CPU> on acpi0 cpu3: <ACPI CPU> on acpi0 atrtc0: <AT realtime clock> port 0x70-0x77 on acpi0 atrtc0: Warning: Couldn't map I/O. Event timer "RTC" frequency 32768 Hz quality 0 hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff irq 8 on acpi0 Timecounter "HPET" frequency 14318180 Hz quality 950 Event timer "HPET" frequency 14318180 Hz quality 450 Event timer "HPET1" frequency 14318180 Hz quality 440 Event timer "HPET2" frequency 14318180 Hz quality 440 attimer0: <AT timer> port 0x40-0x43,0x50-0x53 irq 0 on acpi0 Timecounter "i8254" frequency 1193182 Hz quality 0 Event timer "i8254" frequency 1193182 Hz quality 100 Timecounter "ACPI-safe" frequency 3579545 Hz quality 850 acpi_timer0: <24-bit timer at 3.579545MHz> port 0x408-0x40b on acpi0 acpi_ec0: <Embedded Controller: GPE 0x18> port 0x62,0x66 on acpi0 pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 pcib0: Length mismatch for 3 range: 109fffff vs 10a00000 pci0: <ACPI PCI bus> on pcib0 vgapci0: <VGA-compatible display> port 0x2050-0x2057 mem 0x90000000-0x903fffff,0x80000000-0x8fffffff at device 2.0 on pci0 vgapci0: Boot video device ahci0: <AHCI SATA controller> port 0x2048-0x204f,0x205c-0x205f,0x2040-0x2047,0x2058-0x205b,0x2020-0x203f mem 0x9091e000-0x9091e7ff at device 19.0 on pci0 ahci0: AHCI v1.30 with 2 3Gbps ports, Port Multiplier not supported ahcich0: <AHCI channel> at channel 0 on ahci0 xhci0: <Intel Intel BayTrail USB 3.0 controller> mem 0x90900000-0x9090ffff at device 20.0 on pci0 xhci0: 32 byte context size. xhci0: Port routing mask set to 0xffffffff usbus0 on xhci0 pci0: <encrypt/decrypt> at device 26.0 (no driver attached) hdac0: <Intel BayTrail HDA Controller> mem 0x90910000-0x90913fff at device 27.0 on pci0 pcib1: <ACPI PCI-PCI bridge> at device 28.0 on pci0 pci1: <ACPI PCI bus> on pcib1 pcib2: <ACPI PCI-PCI bridge> at device 28.1 on pci0 pci2: <ACPI PCI bus> on pcib2 iwn0: <Intel Centrino Advanced 6235> mem 0x90600000-0x90601fff at device 0.0 on pci2 pcib3: <ACPI PCI-PCI bridge> at device 28.2 on pci0 pci3: <ACPI PCI bus> on pcib3 re0: <RealTek 8168/8111 B/C/CP/D/DP/E/F/G PCIe Gigabit Ethernet> port 0x1000-0x10ff mem 0x90500000-0x90500fff,0x90400000-0x90403fff at device 0.0 on pci3 re0: Using 1 MSI-X message re0: ASPM disabled re0: Chip rev. 0x4c000000 re0: MAC rev. 0x00000000 miibus0: <MII bus> on re0 rgephy0: <RTL8251 1000BASE-T media interface> PHY 1 on miibus0 rgephy0: none, 10baseT, 10baseT-FDX, 10baseT-FDX-flow, 100baseTX, 100baseTX-FDX, 100baseTX-FDX-flow, 1000baseT-FDX, 1000baseT-FDX-master, 1000baseT-FDX-flow, 1000baseT-FDX-flow-master, auto, auto-flow re0: Using defaults for TSO: 65518/35/2048 re0: Ethernet address: c4:54:44:d6:95:39 001.000008 [2718] netmap_attach success for re0 tx 1/256 rx 1/256 queues/slots isab0: <PCI-ISA bridge> at device 31.0 on pci0 isa0: <ISA bus> on isab0 acpi_button0: <Power Button> on acpi0 acpi_button1: <Sleep Button> on acpi0 acpi_acad0: <AC Adapter> on acpi0 battery0: <ACPI Control Method Battery> on acpi0 acpi_lid0: <Control Method Lid Switch> on acpi0 acpi_tz0: <Thermal Zone> on acpi0 atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0 atkbd0: <AT Keyboard> irq 1 on atkbdc0 kbd0 at atkbd0 atkbd0: [GIANT-LOCKED] psm0: <PS/2 Mouse> irq 12 on atkbdc0 psm0: [GIANT-LOCKED] psm0: model Synaptics Touchpad, device ID 0 ppc0: cannot reserve I/O port range uart0: <16550 or compatible> at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0 est0: <Enhanced SpeedStep Frequency Control> on cpu0 est1: <Enhanced SpeedStep Frequency Control> on cpu1 est2: <Enhanced SpeedStep Frequency Control> on cpu2 est3: <Enhanced SpeedStep Frequency Control> on cpu3 usbus0: 5.0Gbps Super Speed USB v3.0 ZFS filesystem version: 5 ZFS storage pool version: features support (5000) Timecounters tick every 1.000 msec hdacc0: <Realtek (0x0283) HDA CODEC> at cad 0 on hdac0 hdaa0: <Realtek (0x0283) Audio Function Group> at nid 1 on hdacc0 pcm0: <Realtek (0x0283) (Analog 2.0+HP/2.0)> at nid 20,33 and 18 on hdaa0 hdacc1: <Intel (0x2882) HDA CODEC> at cad 2 on hdac0 hdaa1: <Intel (0x2882) Audio Function Group> at nid 1 on hdacc1 pcm1: <Intel (0x2882) (HDMI/DP 8ch)> at nid 4 on hdaa1 ugen0.1: <0x8086> at usbus0 uhub0: <0x8086 XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0 ada0 at ahcich0 bus 0 scbus0 target 0 lun 0 ada0: <KINGSTON SKC300S37A60G 524ABBF0> ATA-8 SATA 3.x device ada0: Serial Number 50026B724303F8A8 ada0: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes) ada0: Command Queueing enabled ada0: 57241MB (117231408 512 byte sectors: 16H 63S/T 16383C) ada0: Previously was known as ad4 random: unblocking device. SMP: AP CPU #2 Launched! SMP: AP CPU #1 Launched! SMP: AP CPU #3 Launched! Timecounter "TSC-low" frequency 1083360265 Hz quality 1000 Root mount waiting for: usbus0 uhub0: 7 ports with 7 removable, self powered ugen0.2: <vendor 0x05e3> at usbus0 uhub1: <vendor 0x05e3 USB2.0 Hub, class 9/0, rev 2.00/85.37, addr 1> on usbus0 Root mount waiting for: usbus0 uhub1: 4 ports with 3 removable, self powered Root mount waiting for: usbus0 ugen0.3: <vendor 0x8087> at usbus0 Root mount waiting for: usbus0 ugen0.4: <SunplusIT INC.> at usbus0 Trying to mount root from zfs:flyer/ROOT/default []... wlan0: Ethernet address: 80:00:0b:5a:cd:23 iwn0: iwn_read_firmware: ucode rev=0x12a80601 iwn0: iwn_read_firmware: ucode rev=0x12a80601 ubt0: <vendor 0x8087 product 0x07da, class 224/1, rev 2.00/78.69, addr 2> on usbus0 WARNING: attempt to domain_add(bluetooth) after domainfinalize() WARNING: attempt to domain_add(netgraph) after domainfinalize() [-- Attachment #4 --] hostb0@pci0:0:0:0: class=0x060000 card=0x09331025 chip=0x0f008086 rev=0x0e hdr=0x00 vendor = 'Intel Corporation' device = 'ValleyView SSA-CUnit' class = bridge subclass = HOST-PCI vgapci0@pci0:0:2:0: class=0x030000 card=0x09331025 chip=0x0f318086 rev=0x0e hdr=0x00 vendor = 'Intel Corporation' device = 'ValleyView Gen7' class = display subclass = VGA bar [10] = type Memory, range 32, base 0x90000000, size 4194304, enabled bar [18] = type Prefetchable Memory, range 32, base 0x80000000, size 268435456, enabled bar [20] = type I/O Port, range 32, base 0x2050, size 8, enabled cap 01[d0] = powerspec 2 supports D0 D3 current D0 cap 05[90] = MSI supports 1 message cap 09[b0] = vendor (length 7) Intel cap 0 version 1 sdhci_pci0@pci0:0:18:0: class=0x080501 card=0x09331025 chip=0x0f168086 rev=0x0e hdr=0x00 vendor = 'Intel Corporation' device = 'ValleyView SDIO Controller' class = base peripheral subclass = SD host controller bar [10] = type Memory, range 32, base 0x90921000, size 4096, enabled bar [14] = type Memory, range 32, base 0x90920000, size 4096, enabled cap 01[80] = powerspec 3 supports D0 D3 current D0 ahci0@pci0:0:19:0: class=0x010601 card=0x09331025 chip=0x0f238086 rev=0x0e hdr=0x00 vendor = 'Intel Corporation' device = 'ValleyView 6-Port SATA AHCI Controller' class = mass storage subclass = SATA bar [10] = type I/O Port, range 32, base 0x2048, size 8, enabled bar [14] = type I/O Port, range 32, base 0x205c, size 4, enabled bar [18] = type I/O Port, range 32, base 0x2040, size 8, enabled bar [1c] = type I/O Port, range 32, base 0x2058, size 4, enabled bar [20] = type I/O Port, range 32, base 0x2020, size 32, enabled bar [24] = type Memory, range 32, base 0x9091f000, size 2048, enabled cap 05[80] = MSI supports 1 message enabled with 1 message cap 01[70] = powerspec 3 supports D0 D3 current D0 cap 12[a8] = SATA Index-Data Pair xhci0@pci0:0:20:0: class=0x0c0330 card=0x09331025 chip=0x0f358086 rev=0x0e hdr=0x00 vendor = 'Intel Corporation' device = 'ValleyView USB xHCI Host Controller' class = serial bus subclass = USB bar [10] = type Memory, range 64, base 0x90900000, size 65536, enabled cap 01[70] = powerspec 2 supports D0 D3 current D0 cap 05[80] = MSI supports 8 messages, 64 bit enabled with 1 message sdhci_pci1@pci0:0:23:0: class=0x080501 card=0x09331025 chip=0x0f508086 rev=0x0e hdr=0x00 vendor = 'Intel Corporation' device = 'ValleyView MIPI-HSI Controller' class = base peripheral subclass = SD host controller bar [10] = type Memory, range 32, base 0x9091e000, size 4096, enabled bar [14] = type Memory, range 32, base 0x9091d000, size 4096, enabled cap 01[80] = powerspec 3 supports D0 D3 current D0 none0@pci0:0:26:0: class=0x108000 card=0x09331025 chip=0x0f188086 rev=0x0e hdr=0x00 vendor = 'Intel Corporation' device = 'ValleyView SEC' class = encrypt/decrypt bar [10] = type Memory, range 32, base 0x90800000, size 1048576, enabled bar [14] = type Memory, range 32, base 0x90700000, size 1048576, enabled cap 01[80] = powerspec 3 supports D0 D3 current D0 cap 05[a0] = MSI supports 1 message hdac0@pci0:0:27:0: class=0x040300 card=0x09331025 chip=0x0f048086 rev=0x0e hdr=0x00 vendor = 'Intel Corporation' device = 'ValleyView High Definition Audio Controller' class = multimedia subclass = HDA bar [10] = type Memory, range 64, base 0x90910000, size 16384, enabled cap 01[50] = powerspec 2 supports D0 D3 current D0 cap 05[60] = MSI supports 1 message, 64 bit enabled with 1 message pcib1@pci0:0:28:0: class=0x060400 card=0x09331025 chip=0x0f488086 rev=0x0e hdr=0x01 vendor = 'Intel Corporation' device = 'ValleyView PCI Express Root Port' class = bridge subclass = PCI-PCI cap 10[40] = PCI-Express 2 root port slot max data 128(128) link x0(x1) speed 0.0(5.0) ASPM L1(L0s/L1) cap 05[80] = MSI supports 1 message cap 0d[90] = PCI Bridge card=0x09331025 cap 01[a0] = powerspec 3 supports D0 D3 current D0 pcib2@pci0:0:28:1: class=0x060400 card=0x09331025 chip=0x0f4a8086 rev=0x0e hdr=0x01 vendor = 'Intel Corporation' device = 'ValleyView PCI Express Root Port' class = bridge subclass = PCI-PCI cap 10[40] = PCI-Express 2 root port slot max data 128(128) link x1(x1) speed 2.5(5.0) ASPM L1(L0s/L1) cap 05[80] = MSI supports 1 message cap 0d[90] = PCI Bridge card=0x09331025 cap 01[a0] = powerspec 3 supports D0 D3 current D0 PCI-e errors = Correctable Error Detected pcib3@pci0:0:28:2: class=0x060400 card=0x09331025 chip=0x0f4c8086 rev=0x0e hdr=0x01 vendor = 'Intel Corporation' device = 'ValleyView PCI Express Root Port' class = bridge subclass = PCI-PCI cap 10[40] = PCI-Express 2 root port slot max data 128(128) link x1(x1) speed 2.5(5.0) ASPM L1(L0s/L1) cap 05[80] = MSI supports 1 message cap 0d[90] = PCI Bridge card=0x09331025 cap 01[a0] = powerspec 3 supports D0 D3 current D0 PCI-e errors = Correctable Error Detected Non-Fatal Error Detected Unsupported Request Detected ehci0@pci0:0:29:0: class=0x0c0320 card=0x09331025 chip=0x0f348086 rev=0x0e hdr=0x00 vendor = 'Intel Corporation' device = 'ValleyView USB Enhanced Host Controller' class = serial bus subclass = USB bar [10] = type Memory, range 32, base 0x90918000, size 1024, enabled cap 01[50] = powerspec 3 supports D0 D3 current D0 cap 0a[58] = EHCI Debug Port at offset 0xa0 in map 0x14 cap 13[98] = PCI Advanced Features: FLR TP isab0@pci0:0:31:0: class=0x060100 card=0x09331025 chip=0x0f1c8086 rev=0x0e hdr=0x00 vendor = 'Intel Corporation' device = 'ValleyView Power Control Unit' class = bridge subclass = PCI-ISA cap 09[e0] = vendor (length 12) Intel cap 1 version 0 features: 4 PCI-e x1 slots none1@pci0:0:31:3: class=0x0c0500 card=0x09331025 chip=0x0f128086 rev=0x0e hdr=0x00 vendor = 'Intel Corporation' device = 'ValleyView SMBus Controller' class = serial bus subclass = SMBus bar [10] = type Memory, range 32, base 0x90919000, size 32, enabled bar [20] = type I/O Port, range 32, base 0x2000, size 32, enabled cap 01[50] = powerspec 3 supports D0 D3 current D0 iwn0@pci0:2:0:0: class=0x028000 card=0x40608086 chip=0x088e8086 rev=0x24 hdr=0x00 vendor = 'Intel Corporation' device = 'Centrino Advanced-N 6235' class = network bar [10] = type Memory, range 64, base 0x90600000, size 8192, enabled cap 01[c8] = powerspec 3 supports D0 D3 current D0 cap 05[d0] = MSI supports 1 message, 64 bit enabled with 1 message cap 10[e0] = PCI-Express 1 endpoint max data 128(128) FLR link x1(x1) speed 2.5(2.5) ASPM L1(L0s/L1) ecap 0001[100] = AER 1 0 fatal 0 non-fatal 3 corrected ecap 0003[140] = Serial 1 80000bffff5acd23 PCI-e errors = Correctable Error Detected Corrected = Receiver Error Bad TLP Bad DLLP re0@pci0:3:0:0: class=0x020000 card=0x09331025 chip=0x816810ec rev=0x0c hdr=0x00 vendor = 'Realtek Semiconductor Co., Ltd.' device = 'RTL8111/8168B PCI Express Gigabit Ethernet controller' class = network subclass = ethernet bar [10] = type I/O Port, range 32, base 0x1000, size 256, enabled bar [18] = type Memory, range 64, base 0x90500000, size 4096, enabled bar [20] = type Prefetchable Memory, range 64, base 0x90400000, size 16384, enabled cap 01[40] = powerspec 3 supports D0 D1 D2 D3 current D0 cap 05[50] = MSI supports 1 message, 64 bit cap 10[70] = PCI-Express 2 endpoint IRQ 1 max data 128(128) link x1(x1) speed 2.5(2.5) ASPM disabled(L0s/L1) cap 11[b0] = MSI-X supports 4 messages, enabled Table in map 0x20[0x0], PBA in map 0x20[0x800] cap 03[d0] = VPD ecap 0001[100] = AER 1 0 fatal 0 non-fatal 2 corrected ecap 0002[140] = VC 1 max VC0 ecap 0003[160] = Serial 1 0000000000000000 ecap 0018[170] = LTR 1 Corrected = Receiver Error Bad DLLP [-- Attachment #5 --] hostb0@pci0:0:0:0: class=0x060000 card=0x09331025 chip=0x0f008086 rev=0x0e hdr=0x00 vendor = 'Intel Corporation' device = 'ValleyView SSA-CUnit' class = bridge subclass = HOST-PCI vgapci0@pci0:0:2:0: class=0x030000 card=0x09331025 chip=0x0f318086 rev=0x0e hdr=0x00 vendor = 'Intel Corporation' device = 'ValleyView Gen7' class = display subclass = VGA bar [10] = type Memory, range 32, base 0x90000000, size 4194304, enabled bar [18] = type Prefetchable Memory, range 32, base 0x80000000, size 268435456, enabled bar [20] = type I/O Port, range 32, base 0x2050, size 8, enabled cap 01[d0] = powerspec 2 supports D0 D3 current D0 cap 05[90] = MSI supports 1 message cap 09[b0] = vendor (length 7) Intel cap 0 version 1 ahci0@pci0:0:19:0: class=0x010601 card=0x09331025 chip=0x0f238086 rev=0x0e hdr=0x00 vendor = 'Intel Corporation' device = 'ValleyView 6-Port SATA AHCI Controller' class = mass storage subclass = SATA bar [10] = type I/O Port, range 32, base 0x2048, size 8, enabled bar [14] = type I/O Port, range 32, base 0x205c, size 4, enabled bar [18] = type I/O Port, range 32, base 0x2040, size 8, enabled bar [1c] = type I/O Port, range 32, base 0x2058, size 4, enabled bar [20] = type I/O Port, range 32, base 0x2020, size 32, enabled bar [24] = type Memory, range 32, base 0x9091e000, size 2048, enabled cap 05[80] = MSI supports 1 message enabled with 1 message cap 01[70] = powerspec 3 supports D0 D3 current D0 cap 12[a8] = SATA Index-Data Pair xhci0@pci0:0:20:0: class=0x0c0330 card=0x09331025 chip=0x0f358086 rev=0x0e hdr=0x00 vendor = 'Intel Corporation' device = 'ValleyView USB xHCI Host Controller' class = serial bus subclass = USB bar [10] = type Memory, range 64, base 0x90900000, size 65536, enabled cap 01[70] = powerspec 2 supports D0 D3 current D0 cap 05[80] = MSI supports 8 messages, 64 bit enabled with 1 message none0@pci0:0:26:0: class=0x108000 card=0x09331025 chip=0x0f188086 rev=0x0e hdr=0x00 vendor = 'Intel Corporation' device = 'ValleyView SEC' class = encrypt/decrypt bar [10] = type Memory, range 32, base 0x90800000, size 1048576, enabled bar [14] = type Memory, range 32, base 0x90700000, size 1048576, enabled cap 01[80] = powerspec 3 supports D0 D3 current D0 cap 05[a0] = MSI supports 1 message hdac0@pci0:0:27:0: class=0x040300 card=0x09331025 chip=0x0f048086 rev=0x0e hdr=0x00 vendor = 'Intel Corporation' device = 'ValleyView High Definition Audio Controller' class = multimedia subclass = HDA bar [10] = type Memory, range 64, base 0x90910000, size 16384, enabled cap 01[50] = powerspec 2 supports D0 D3 current D0 cap 05[60] = MSI supports 1 message, 64 bit enabled with 1 message pcib1@pci0:0:28:0: class=0x060400 card=0x09331025 chip=0x0f488086 rev=0x0e hdr=0x01 vendor = 'Intel Corporation' device = 'ValleyView PCI Express Root Port' class = bridge subclass = PCI-PCI cap 10[40] = PCI-Express 2 root port slot max data 128(128) link x0(x1) speed 0.0(5.0) ASPM L1(L0s/L1) cap 05[80] = MSI supports 1 message cap 0d[90] = PCI Bridge card=0x09331025 cap 01[a0] = powerspec 3 supports D0 D3 current D0 pcib2@pci0:0:28:1: class=0x060400 card=0x09331025 chip=0x0f4a8086 rev=0x0e hdr=0x01 vendor = 'Intel Corporation' device = 'ValleyView PCI Express Root Port' class = bridge subclass = PCI-PCI cap 10[40] = PCI-Express 2 root port slot max data 128(128) link x1(x1) speed 2.5(5.0) ASPM L1(L0s/L1) cap 05[80] = MSI supports 1 message cap 0d[90] = PCI Bridge card=0x09331025 cap 01[a0] = powerspec 3 supports D0 D3 current D0 PCI-e errors = Correctable Error Detected pcib3@pci0:0:28:2: class=0x060400 card=0x09331025 chip=0x0f4c8086 rev=0x0e hdr=0x01 vendor = 'Intel Corporation' device = 'ValleyView PCI Express Root Port' class = bridge subclass = PCI-PCI cap 10[40] = PCI-Express 2 root port slot max data 128(128) link x1(x1) speed 2.5(5.0) ASPM L1(L0s/L1) cap 05[80] = MSI supports 1 message cap 0d[90] = PCI Bridge card=0x09331025 cap 01[a0] = powerspec 3 supports D0 D3 current D0 PCI-e errors = Correctable Error Detected Non-Fatal Error Detected Unsupported Request Detected isab0@pci0:0:31:0: class=0x060100 card=0x09331025 chip=0x0f1c8086 rev=0x0e hdr=0x00 vendor = 'Intel Corporation' device = 'ValleyView Power Control Unit' class = bridge subclass = PCI-ISA cap 09[e0] = vendor (length 12) Intel cap 1 version 0 features: 4 PCI-e x1 slots none1@pci0:0:31:3: class=0x0c0500 card=0x09331025 chip=0x0f128086 rev=0x0e hdr=0x00 vendor = 'Intel Corporation' device = 'ValleyView SMBus Controller' class = serial bus subclass = SMBus bar [10] = type Memory, range 32, base 0x90918000, size 32, enabled bar [20] = type I/O Port, range 32, base 0x2000, size 32, enabled cap 01[50] = powerspec 3 supports D0 D3 current D0 iwn0@pci0:2:0:0: class=0x028000 card=0x40608086 chip=0x088e8086 rev=0x24 hdr=0x00 vendor = 'Intel Corporation' device = 'Centrino Advanced-N 6235' class = network bar [10] = type Memory, range 64, base 0x90600000, size 8192, enabled cap 01[c8] = powerspec 3 supports D0 D3 current D0 cap 05[d0] = MSI supports 1 message, 64 bit enabled with 1 message cap 10[e0] = PCI-Express 1 endpoint max data 128(128) FLR link x1(x1) speed 2.5(2.5) ASPM L1(L0s/L1) ecap 0001[100] = AER 1 0 fatal 0 non-fatal 3 corrected ecap 0003[140] = Serial 1 80000bffff5acd23 PCI-e errors = Correctable Error Detected Corrected = Receiver Error Bad TLP Bad DLLP re0@pci0:3:0:0: class=0x020000 card=0x09331025 chip=0x816810ec rev=0x0c hdr=0x00 vendor = 'Realtek Semiconductor Co., Ltd.' device = 'RTL8111/8168B PCI Express Gigabit Ethernet controller' class = network subclass = ethernet bar [10] = type I/O Port, range 32, base 0x1000, size 256, enabled bar [18] = type Memory, range 64, base 0x90500000, size 4096, enabled bar [20] = type Prefetchable Memory, range 64, base 0x90400000, size 16384, enabled cap 01[40] = powerspec 3 supports D0 D1 D2 D3 current D0 cap 05[50] = MSI supports 1 message, 64 bit cap 10[70] = PCI-Express 2 endpoint IRQ 1 max data 128(128) link x1(x1) speed 2.5(2.5) ASPM disabled(L0s/L1) cap 11[b0] = MSI-X supports 4 messages, enabled Table in map 0x20[0x0], PBA in map 0x20[0x800] cap 03[d0] = VPD ecap 0001[100] = AER 1 0 fatal 0 non-fatal 2 corrected ecap 0002[140] = VC 1 max VC0 ecap 0003[160] = Serial 1 0000000000000000 ecap 0018[170] = LTR 1 Corrected = Receiver Error Bad DLLPhelp
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?42818.213.113.68.53.1420039470.squirrel>