Date: Thu, 06 Nov 2003 13:38:28 -0800 From: Jason Williams <jwilliams@courtesymortgage.com> To: freebsd-hardware@freebsd.org Subject: Problems installing 4.9 on a IBM X series server Message-ID: <5.2.1.1.0.20031106133734.00ae2af8@pop.courtesymortgage.com>
next in thread | raw e-mail | index | archive | help
Hello everyone.
Running into a bit of a problem installing 4.9 on a IBM X series server.
The server has 3 SCSI drives with a servRAID card. I have RAID 5 configured
on it.
4.9 did not detect the drives, so im wondering if it even supports it or if
there is a driver I can d/l to use and boot to it.
Here is some output from a second server running *coughLinuxcough*:
SvrWks CSB5: IDE controller at PCI slot 00:0f.1
SvrWks CSB5: chipset revision 147
SvrWks CSB5: not 100% native mode: will probe irqs later
SvrWks CSB5: simplex device: DMA forced
ide0: BM-DMA at 0x0700-0x0707, BIOS settings: hda:DMA, hdb:DMA
SvrWks CSB5: simplex device: DMA forced
ide1: BM-DMA at 0x0708-0x070f, BIOS settings: hdc:DMA, hdd:DMA
SCSI subsystem driver Revision: 1.00
Warning: Adapter 0 Firmware Compatible Version is MR600, but should be SA510
Warning: Adapter 0 BIOS Compatible Version is MR600, but should be SA510
Warning ! ! ! ServeRAID Version Mismatch
scsi0 : IBM PCI ServeRAID 5.10.21
Vendor: IBM Model: SERVERAID Rev: 1.00
Type: Direct-Access ANSI SCSI revision: 02
Vendor: IBM Model: SERVERAID Rev: 1.00
Type: Processor ANSI SCSI revision: 02
Vendor: IBM Model: 32P0032a S320 1 Rev: 1
Type: Processor ANSI SCSI revision: 02
Attached scsi disk sda at scsi0, channel 0, id 0, lun 0
I checked the hardware list for 4.9 and I did see SvrWks: CSB5.
Any ideas on what im missing?
I appreciate the help.
Jason
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?5.2.1.1.0.20031106133734.00ae2af8>