Date: Thu, 1 Mar 2001 16:59:42 +0100 (CET) From: Alexander Leidinger <Alexander@Leidinger.net> To: current@freebsd.org Subject: undefined reference _mtx_assert Message-ID: <200103011559.f21FxjU49058@Magelan.Leidinger.net>
next in thread | raw e-mail | index | archive | help
[-- Attachment #1 --]
Hi,
since 2 or 3 days I can't build a new kernel:
---snip---
linking kernel.debug
cam_periph.o: In function `cam_periph_mapmem':
/big/usr/src/sys/cam/cam_periph.c(.text+0xa1a): undefined reference to `_mtx_assert'
cam_periph.o: In function `cam_periph_unmapmem':
/big/usr/src/sys/cam/cam_periph.c(.text+0xb81): undefined reference to `_mtx_assert'
/big/usr/src/sys/cam/cam_periph.c(.text+0xca5): undefined reference to `_mtx_assert'
/big/usr/src/sys/cam/cam_periph.c(.text+0xdb5): undefined reference to `_mtx_assert'
if_ed.o: In function `ed_start':
/big/usr/src/sys/dev/ed/if_ed.c(.text+0x2c97): undefined reference to `_mtx_assert'
if_ed.o(.text+0x3a0f):/big/usr/src/sys/dev/ed/if_ed.c: more undefined references to `_mtx_assert' follow
*** Error code 1
---snip---
I already removed my build directory, tried to use "make buildkernel"
instead of doing it the old way and also did 2 "make cleandir" before a
"make depend && make".
My kernel config is attached, the source is from today in the morning.
Bye,
Alexander.
--
The dark ages were caused by the Y1K problem.
http://www.Leidinger.net Alexander @ Leidinger.net
GPG fingerprint = C518 BC70 E67F 143F BE91 3365 79E2 9C60 B006 3FE7
[-- Attachment #2 --]
machine i386
ident WORK
maxusers 40
makeoptions DEBUG=-g
makeoptions CONF_CFLAGS=-fno-builtin
hints "WORK.hints"
# Options for the VM subsystem
#options PQ_NOOPT # No coloring
options PQ_LARGECACHE # color for 512k/16k cache
#options PQ_HUGECACHE # color for 1024k/16k cache
cpu I686_CPU # aka Pentium Pro(tm)
options CPU_FASTER_5X86_FPU
options CPU_SUSP_HLT
options "NO_F00F_HACK"
options PERFMON
options COMPAT_43
options SYSVSHM
options SHMMAXPGS=8192
options SYSVSEM
options SYSVMSG
options DDB
options GDB_REMOTE_CHAT
options KTRACE #kernel tracing
options UCONSOLE
options USERCONFIG #boot -c editor
options VISUAL_USERCONFIG #visual boot -c editor
options INET #Internet communications protocols
device ether #Generic Ethernet
device sppp #Generic Synchronous PPP
device loop 1 #Network loopback device
device bpf #Berkeley packet filter
#
# The INVARIANTS option is used in a number of source files to enable
# extra sanity checking of internal structures. This support is not
# enabled by default because of the extra time it would take to check
# for these conditions, which can only occur as a result of
# programming errors.
#
options INVARIANTS
options MROUTING # Multicast routing
options IPFIREWALL #firewall
options IPFIREWALL_VERBOSE #print information about
# dropped packets
options IPFIREWALL_VERBOSE_LIMIT=100 #limit verbosity
options TCP_RESTRICT_RST #restrict emission of TCP RST
options FFS #Fast filesystem
options SOFTUPDATES
options P1003_1B
options _KPOSIX_PRIORITY_SCHEDULING
options _KPOSIX_VERSION=199309L
device scbus #base SCSI code
#device ch #SCSI media changers
device da #SCSI direct access devices (aka disks)
#device sa #SCSI tapes
device cd #SCSI CD-ROMs
device pass #CAM passthrough driver
device ses #SCSI SES/SAF-TE driver
options CAM_MAX_HIGHPOWER=4
options SCSI_DELAY=5000# Be pessimistic about Joe SCSI device
options SES_ENABLE_PASSTHROUGH
device pty #Pseudo ttys
device gzip #Exec gzipped a.out's
#device snp 3 #Snoop device - to look at pty/vty/etc..
options MSGBUF_SIZE=40960
device isa
# Enable support for the kernel PLL to use an external PPS signal,
# under supervision of [x]ntpd(8)
# More info in ntpd documentation: http://www.eecis.udel.edu/~ntp
options PPS_SYNC
device atkbdc 1
device atkbd
options ATKBD_DFLT_KEYMAP # specify the built-in keymap
makeoptions ATKBD_DFLT_KEYMAP="german.iso"
#options KBD_DISABLE_KEYMAP_LOAD # refuse to load a keymap
options KBD_INSTALL_CDEV # install a CDEV entry in /dev
device psm
device vga
device splash
device sc 1
options MAXCONS=16 # number of virtual consoles
options SC_DFLT_FONT # compile font in
makeoptions SC_DFLT_FONT="iso"
options SC_HISTORY_SIZE=800 # number of history buffer lines
device npx
device ata
device atadisk # ATA disk drives
#device atapicd # ATAPI CDROM drives
device atapifd # ATAPI floppy drives
#device atapist # ATAPI tape drives
device fdc
device sio 2
device ed
#device miibus
#device wb
device midi
device seq
device pca
device apm
#device acpi
device pci
device ahc
options AHC_ALLOW_MEMIO
device smbus
device intpm
device smb
device iicbus
device iicbb
device ic
device iic
device iicsmb
options AVM_A1
device isic
device "i4bq921"
device "i4bq931"
device "i4b"
device "i4btrc" 2
device "i4bctl"
device "i4brbch" 2
#device "i4btel" 1
#device "i4bipr" 2
options IPR_VJ
device "i4bisppp" 2
options PERIPH_1284 # Makes your computer act as a IEEE1284
# compliant peripheral
device ppbus
device lpt
#device plip
device ppi
device pps
device lpbb
#options PCFCLOCK_VERBOSE
device pcfclock
options PPC_PROBE_CHIPSET
device ppc
#options CLK_CALIBRATION_LOOP
#options CLK_USE_I8254_CALIBRATION
options CLK_USE_TSC_CALIBRATION
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?200103011559.f21FxjU49058>