Date: Fri, 7 Jan 2005 08:37:25 +0530 From: "Subhro" <subhro.kar@gmail.com> To: "'Tom Vilot'" <tom@vilot.com>, "'FreeBSD Questions'" <questions@freebsd.org> Subject: RE: SCSI Hardware problem? Message-ID: <41ddfcf7.57138333.5bba.470b@smtp.gmail.com> In-Reply-To: <41DDB91C.5000600@vilot.com>
index | next in thread | previous in thread | raw e-mail
[-- Attachment #1 --]
> -----Original Message-----
> From: owner-freebsd-questions@freebsd.org [mailto:owner-freebsd-
> questions@freebsd.org] On Behalf Of Tom Vilot
> Sent: Friday, January 07, 2005 3:48
> To: FreeBSD Questions
> Subject: SCSI Hardware problem?
>
> This looks to me like I've got a hardware problem. SCSI drive 0:4:0 --
> or is this perhaps something else?
>
> I had to manually type this in ... :) copying it off the screen since I
> don't see this stuff in a log anywhere.
>
> FreeBSD 5.3 on a dual 450MHz Xeon with SCSI and IDE. GENERIC kernel.
>
> There was stuff above this, but it had scrolled off the screen and the
> console was locked up.
>
> da1 (scsi 4 on bus 0) is my boot drive.
>
> -----------------------------------
>
> <<<<<<<<<<<<<<<<<<<<Dump Card State Ends>>>>>>>>>>>>>>>>>>>>
>
> (da1:ahc1:0:4:0): SCB 0x3 - timed out
>
> sg[0] - Addr 0x2574b000
>
> (da1:ahc1:0:4:0): Queuing a BDR SCB
> (da1:ahc1:0:4:0): no longer in timeout, status = 24a
> ahc1: Timedout SCBs already complete. Interrupts may not be functioning.
> (da1:ahc1:0:4:0): WRITE(10). CDB: 2a, 0 0 47 49 23 0 0 4 0
> (da1:ahc1:0:4:0): CAM Status: SCSI Status Error
> (da1:ahc1:0:4:0): SCSI Status: Check Condition
> (da1:ahc1:0:4:0): UNIT ATTENTION asc:29,1
> (da1:ahc1:0:4:0): Power on occurred
> (da1:ahc1:0:4:0): Retrying Command (per sense Data)
> (da1:ahc1:0:4:0): WRITE(10). CDB: 2a, 0 0 47 49 23 0 0 4 0
> (da1:ahc1:0:4:0): CAM Status: SCSI Status Error
> (da1:ahc1:0:4:0): CAM Status: Check Condition
> (da1:ahc1:0:4:0): UNIT ATTENTION asc:29,1
> (da1:ahc1:0:4:0): Power on occurred
> (da1:ahc1:0:4:0): Retries Exhausted
> (da1:ahc1:0:4:0): lost device
> (da1:ahc1:0:4:0): invalidating pack
> panic: initiate_write_inodeblock_ufs2: already started
> Uptime: 3d12h50m3s
Is the SCSI bus terminated properly. Changing LUNs help?
>
> -----------------------------------
>
> I'm guessing I will want to copy this entire drive over to another one.
> What's the best way .... dd?
dd works only and only if the source drive and the target drive are *exact*
clones of each other, which is not something seen very frequently. Why don't
you use dump?
>
> Oh, one other question ...
>
> I'm used to runlevels on Linux. When I reset this machine, I'm presented
> with the prompt asking me for the default shell (/bin/sh). I hit enter,
> and I'm in sh where I can fsck the other drives and mount them. Cool.
> But ....once I have done that, how do I tell BSD to basically "continue"
> where it left off (i.e. run /etc/netstart sshd, httpd, psqld, zope, etc)
> without manually invoking each of those items?
Ctrl+D
> Thanks in advance.
Welcome :-)
Regards
S.
Indian Institute of Information Technology
Subhro Sankha Kar
Block AQ-13/1, Sector V
Salt Lake City
PIN 700091
India
[-- Attachment #2 --]
0 *H
01 0 + 0 *H
0=0 ͺVT"rU0
*H
0_1 0 UUS10U
VeriSign, Inc.1705U .Class 1 Public Primary Certification Authority0
960129000000Z
280801235959Z0_1 0 UUS10U
VeriSign, Inc.1705U .Class 1 Public Primary Certification Authority00
*H
0 mVa-Hqg뷞
8%Fs$]
en VsߴX9knը?144g NEVi xG)6c\-{2{0*/1g 0
*H
L?hC3]Mz36ؕ"6hl|B.?OvJ͠
)"]݁#{%F0yK @<_ SH䆴{5{%ӎ?8 4 q0f0Ϡ
O[uj)0
*H
0_1 0 UUS10U
VeriSign, Inc.1705U .Class 1 Public Primary Certification Authority0
980512000000Z
080512235959Z010U
VeriSign, Inc.1 0 U VeriSign Trust Network1F0DU =www.verisign.com/repository/RPA Incorp. By Ref.,LIAB.LTD(c)981H0FU?VeriSign Class 1 CA Individual Subscriber-Persona Not Validated00
*H
0 ZDUz-Ox6
JoTw*h1ApzKHV-BD\B/;'
]6B3nTOJ ƚj$e~7jJ 00 `HB05U .0,0*(&$http://crl.verisign.com/pca1.1.1.crl0GU @0>0< `HE0-0++ www.verisign.com/repository/RPA0U 0 0 U 0
*H
B|ߌyLMU/P^N.^2ye JRը1!l4x BZъު"!e3 3
>5d$[h|7d
Ž33>>s 020:N4fr40
*H
010U
VeriSign, Inc.1 0 U VeriSign Trust Network1F0DU =www.verisign.com/repository/RPA Incorp. By Ref.,LIAB.LTD(c)981H0FU?VeriSign Class 1 CA Individual Subscriber-Persona Not Validated0
041111000000Z
050718235959Z010U
VeriSign, Inc.1 0 U VeriSign Trust Network1F0DU =www.verisign.com/repository/RPA Incorp. by Ref.,LIAB.LTD(c)981 0 U Persona Not Validated1402U +Digital ID Class 1 - Microsoft Full Service10U
Subhro Kar1#0! *H
subhro.kar@gmail.com00
*H
0 )Fp[ "
,9Uڵ87(v0r1C.\4VP@h !" r(
⎅?-"2K 00 U 0 0DU =0;09 `HE0*0(+ https://www.verisign.com/rpa0 U 0 U %0++0
`HENone03U ,0*0(&$"http://crl.verisign.com/class1.crl0
*H
]5羧n-A$NyiI k{}Y(DKTHE@&mZK#TEWO.bqƼ sE $raEsh{Os{[=zz_,v߈QԊ>1>0:0010U
VeriSign, Inc.1 0 U VeriSign Trust Network1F0DU =www.verisign.com/repository/RPA Incorp. By Ref.,LIAB.LTD(c)981H0FU?VeriSign Class 1 CA Individual Subscriber-Persona Not Validated:N4fr40 + 0 *H
1 *H
0 *H
1
050107030725Z0# *H
1OhD:Iܶ?`lo+ѕ0g *H
1Z0X0
*H
0*H
0
*H
@0+0
*H
(0+0
*H
0 +710010U
VeriSign, Inc.1 0 U VeriSign Trust Network1F0DU =www.verisign.com/repository/RPA Incorp. By Ref.,LIAB.LTD(c)981H0FU?VeriSign Class 1 CA Individual Subscriber-Persona Not Validated:N4fr40 *H
1䠁010U
VeriSign, Inc.1 0 U VeriSign Trust Network1F0DU =www.verisign.com/repository/RPA Incorp. By Ref.,LIAB.LTD(c)981H0FU?VeriSign Class 1 CA Individual Subscriber-Persona Not Validated:N4fr40
*H
{-1kLc(C8(Ufu$[<{&'έp¹ Fks }%k6]
$ "
px|F;zwYC \n$E' 5 b^81s g̖
help
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?41ddfcf7.57138333.5bba.470b>