Date: Tue, 11 Feb 1997 21:39:45 -0600 From: "Erik H. Moe" <ehm@cris.com> To: bugs@freebsd.org Subject: IDE-CDROM Message-ID: <33013B81.308B@cris.com>
next in thread | raw e-mail | index | archive | help
Hello, I have a an Intel "Plato" motherboard with the "Neptune" chipset and a RZ1000 EIDE controller. I am having problems getting FreeBSD 2.1.6 to detect my Mitsumi FX400 IDE-CDROM drive when it is connected to my secondary IDE controller. It is the only device on the secondary controller, and I have tried it in both the master and slave configurations. However, FreeBSD will detect the drive if it is connected to my primary IDE controller as a slave device along with my IDE hard drive. FreeBSD 2.1.6-RELEASE #0: Sat Feb 8 23:20:19 1997 root@wombat.gordo.com:/usr/src/sys/compile/WOMBAT CPU: 89-MHz Pentium 735\\90 or 815\\100 (Pentium-class CPU) Origin = "GenuineIntel" Id = 0x524 Stepping=4 Features=0x1bf<FPU,VME,DE,PSE,TSC,MSR,MCE,CX8> real memory = 16777216 (16384K bytes) avail memory = 14909440 (14560K bytes) Probing for devices on PCI bus 0: chip0 <Intel 82434NX (Neptune) PCI cache memory controller> rev 17 on pci0:0 chip1 <Intel 82378ZB PCI-ISA bridge> rev 3 on pci0:2 vga0 <VGA-compatible display device> rev 1 on pci0:14 Probing for devices on the ISA bus: sc0 at 0x60-0x6f irq 1 on motherboard sc0: VGA color <16 virtual consoles, flags=0x0> ed0 at 0x240-0x25f irq 11 maddr 0xcc000 msize 16384 on isa ed0: address 00:00:c0:6b:4b:8e, type SMC8216/SMC8216C (16 bit) lpt0 at 0x378-0x37f irq 7 on isa lpt0: Interrupt-driven port lp0: TCP/IP capable interface psm0 at 0x60-0x63 irq 12 on motherboard sio0 at 0x3f8-0x3ff irq 4 on isa sio0: type 16550A sio1 at 0x2f8-0x2ff irq 3 on isa sio1: type 16550A pca0 on motherboard pca0: PC speaker audio driver wdc0 at 0x1f0-0x1f7 irq 14 on isa wdc0: unit 0 (wd0): <WDC AC31000H> wd0: 1033MB (2116800 sectors), 2100 cyls, 16 heads, 63 S/T, 512 B/S atapi0.1 at 0x1f0: attach called atapiX.1 at 0x1f0: identify not ready, status=1<check> wdc1 at 0x170-0x177 irq 15 on isa atapi1.0 at 0x170: attach called atapiX.0 at 0x170: no device atapi1.1 at 0x170: attach called atapiX.1 at 0x170: controller busy, status=ff<busy,ready,fault,opdone,drq,corr,check> fdc0 at 0x3f0-0x3f7 irq 6 drq 2 on isa fdc0: NEC 72065B fd0: 1.44MB 3.5in npx0 on motherboard npx0: INT 16 interface sb0 at 0x220 irq 7 drq 1 on isa sb0: <SoundBlaster 16 4.12> sbxvi0 at 0x0 drq 5 on isa sbxvo0: <SoundBlaster 16 4.12> sbmidi0 at 0x330 on isa <SoundBlaster MPU-401> opl0 at 0x388 on isa opl0: <Yamaha OPL-3 FM>
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?33013B81.308B>