Date: Mon, 10 Jan 2005 23:31:45 -0200 From: =?ISO-8859-1?Q?Jo=E3o_Carlos_Mendes_Lu=EDs?= <jonny@jonny.eng.br> To: freebsd-amd64@freebsd.org Subject: Athlon 64 2800+ on ASUS K8V SE freezing Message-ID: <41E32C81.8090608@jonny.eng.br>
next in thread | raw e-mail | index | archive | help
Hi,
I've been running a test machine with FreeBSD-amd64 5.3-stable
since 5.3-beta. It's a Athlon 64 2800+ on ASUS K8V SE, 512M DDR400 and
2 Seagate SATA 200 on Promise RAID1. In the test setup, no problem was
found, except for the onboard sk(4), which has been "replaced" by an
Intel fxp(4).
Then, after migrating for production work, this same machine is now
freezing (no panics, just full freeze) after some time. I could not yet
find a repeatable procedure to freeze this machine. I have removed
almost every non-essencial driver from the kernel and non-essencial
daemons from running, but it still freezes.
Could somebody please help me on how to seek the source of these
problems? I've seen some reports of problems with the Promise RAID
Controler, the firewire controller (which I am not using) and the ACPI
subsystem (which I don't know if I can disable). But all of these are
now more than six months old, and I thought they have been fixed.
Here is the current dmesg.boot. Note the DMA failure on ad0. This
disk is not being used here, it is installed just for copying of
previous i386 system data, but this disk is pretty new and had no
problems before. Anyway, the freeze was happening before it has been
installed here.
Copyright (c) 1992-2005 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD 5.3-STABLE #0: Mon Jan 10 18:48:24 BRST 2005
jonny@roma.coe.ufrj.br:/usr/cvsup/RELENG_5/src/sys/amd64/compile/ROMA64
WARNING: DIAGNOSTIC option enabled, expect reduced performance.
WARNING: debug.mpsafenet forced to 0 as ipsec requires Giant
WARNING: MPSAFE network stack disabled, expect reduced performance.
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: AMD Athlon(tm) 64 Processor 2800+ (1802.32-MHz K8-class CPU)
Origin = "AuthenticAMD" Id = 0xf48 Stepping = 8
Features=0x78bfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,MMX,FXSR,SSE,SSE2>
AMD Features=0xe0500800<SYSCALL,NX,MMX+,LM,3DNow+,3DNow>
real memory = 536018944 (511 MB)
avail memory = 508870656 (485 MB)
ACPI APIC Table: <A M I OEMAPIC >
ioapic0: Changing APIC ID to 1
MADT: Forcing active-low polarity and level trigger for SCI
ioapic0 <Version 0.3> irqs 0-23 on motherboard
acpi0: <A M I OEMXSDT> on motherboard
acpi0: Power Button (fixed)
Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0
cpu0: <ACPI CPU> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
agp0: <VIA 8385 host to PCI bridge> mem 0xf8000000-0xfbffffff at device
0.0 on pci0
pcib1: <ACPI PCI-PCI bridge> at device 1.0 on pci0
pci1: <ACPI PCI bus> on pcib1
pci1: <display, VGA> at device 0.0 (no driver attached)
atapci0: <Promise PDC20378 SATA150 controller> port
0xbc00-0xbc7f,0xcc00-0xcc0f,0xdc00-0xdc3f mem
0xf7700000-0xf771ffff,0xf7800000-0xf7800fff irq 18 at device 8.0 on pci0
atapci0: failed: rid 0x20 is memory, requested 4
ata2: channel #0 on atapci0
ata3: channel #1 on atapci0
ata4: channel #2 on atapci0
fxp0: <Intel 82558 Pro/100 Ethernet> port 0xec00-0xec1f mem
0xf7e00000-0xf7efffff,0xf5200000-0xf5200fff irq 16 at device 9.0 on pci0
miibus0: <MII bus> on fxp0
inphy0: <i82555 10/100 media interface> on miibus0
inphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
fxp0: Ethernet address: 00:a0:c9:cc:52:b3
fxp0: [GIANT-LOCKED]
puc0: <US Robotics (3Com) 3CP5609 PCI 16550 Modem> port 0xb000-0xb007
irq 19 at device 14.0 on pci0
sio4: <US Robotics (3Com) 3CP5609 PCI 16550 Modem> on puc0
sio4: type 16550A
sio4: unable to activate interrupt in fast mode - using normal mode
atapci1: <VIA 6420 SATA150 controller> port
0xd000-0xd0ff,0xd400-0xd40f,0xd800-0xd803,0xe000-0xe007,0xe400-0xe403,0xe800-0xe807
irq 20 at device 15.0 on pci0
ata5: channel #0 on atapci1
ata6: channel #1 on atapci1
atapci2: <VIA 8237 UDMA133 controller> port
0xfc00-0xfc0f,0x376,0x170-0x177,0x3f6,0x1f0-0x1f7 at device 15.1 on pci0
ata0: channel #0 on atapci2
ata1: channel #1 on atapci2
pci0: <serial bus, USB> at device 16.0 (no driver attached)
pci0: <serial bus, USB> at device 16.1 (no driver attached)
pci0: <serial bus, USB> at device 16.2 (no driver attached)
pci0: <serial bus, USB> at device 16.3 (no driver attached)
pci0: <serial bus, USB> at device 16.4 (no driver attached)
isab0: <PCI-ISA bridge> at device 17.0 on pci0
isa0: <ISA bus> on isab0
pci0: <multimedia, audio> at device 17.5 (no driver attached)
acpi_button0: <Power Button> on acpi0
acpi_button1: <Sleep Button> on acpi0
atkbdc0: <Keyboard controller (i8042)> port 0x64,0x60 irq 1 on acpi0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: [GIANT-LOCKED]
psm0: model Generic PS/2 mouse, device ID 0
fdc0: <floppy drive controller (FDE)> port 0x3f7,0x3f0-0x3f5 irq 6 drq 2
on acpi0
fdc0: [FAST]
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
sio0: <16550A-compatible COM port> port 0x2f8-0x2ff irq 3 flags 0x10 on
acpi0
sio0: type 16550A
sio1: configured irq 4 not in bitmap of probed irqs 0
sio1: port may not be enabled
sio1: <16550A-compatible COM port> port 0x3f8-0x3ff irq 4 on acpi0
sio1: type 16550A
orm0: <ISA Option ROM> at iomem 0xc0000-0xcafff on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
Timecounter "TSC" frequency 1802318426 Hz quality 800
Timecounters tick every 1.000 msec
IPsec: Initialized Security Association Processing.
ipfw2 initialized, divert disabled, rule-based forwarding enabled,
default to accept, logging unlimited
ad0: 114473MB <ST3120022A/3.06> [232581/16/63] at ata0-master UDMA100
ad0: TIMEOUT - READ_DMA retrying (2 retries left) LBA=234441585
ad0: FAILURE - READ_DMA timed out
acd0: CDROM <GCR-8521B/1.00> at ata1-master PIO4
ad4: 190782MB <ST3200822AS/3.01> [387621/16/63] at ata2-master SATA150
ad6: 190782MB <ST3200822AS/3.01> [387621/16/63] at ata3-master SATA150
ar0: 190782MB <ATA RAID1 array> [24321/255/63] status: READY subdisks:
disk0 READY on ad6 at ata3-master
disk1 READY on ad4 at ata2-master
Mounting root from ufs:/dev/ar0s1a
Accounting enabled
Heres the kernel config file:
machine amd64
cpu HAMMER
ident ROMA
maxusers 0
options INCLUDE_CONFIG_FILE
options INVARIANTS
options INVARIANT_SUPPORT
options DIAGNOSTIC
options SCHED_4BSD # 4BSD scheduler
options INET # InterNETworking
options IPSEC # IP security
options IPFIREWALL
options IPFIREWALL_VERBOSE
options IPFIREWALL_DEFAULT_TO_ACCEPT
options IPFIREWALL_FORWARD
options FFS # Berkeley Fast Filesystem
options SOFTUPDATES # Enable FFS soft updates support
options QUOTA # enable disk quotas
options NFSCLIENT # Network Filesystem Client
options NFSSERVER # Network Filesystem Server
options MSDOSFS # MSDOS Filesystem
options CD9660 # ISO 9660 Filesystem
options PROCFS # Process filesystem (requires PSEUDOFS)
options NULLFS # NULL filesystem
options PSEUDOFS # Pseudo-filesystem framework
options GEOM_GPT # GUID Partition Tables.
options COMPAT_43
options KTRACE # ktrace(1) support
options SYSVSHM # SYSV-style shared memory
options SYSVMSG # SYSV-style message queues
options SYSVSEM # SYSV-style semaphores
options _KPOSIX_PRIORITY_SCHEDULING # Posix P1003_1B real-time extensions
options KBD_INSTALL_CDEV # install a CDEV entry in /dev
options ADAPTIVE_GIANT # Giant mutex is adaptive.
device atpic # 8259A compatability
options NO_MIXED_MODE # Don't penalize working chipsets
device acpi
options ACPI_DEBUG
device isa
device pci
device agp
device fdc
device ata
device atadisk # ATA disk drives
device ataraid # ATA RAID drives
device atapicd # ATAPI CDROM drives
options ATA_STATIC_ID # Static device numbering
device atkbdc # AT keyboard controller
device atkbd # AT keyboard
device psm # PS/2 mouse
device vga # VGA video card driver
device sc
options SC_DFLT_FONT
makeoptions SC_DFLT_FONT=iso15
options SC_HISTORY_SIZE=1000 # number of history buffer lines
device sio # 8250, 16[45]50 based serial ports
device puc
device miibus # MII bus support
device fxp # Intel EtherExpress PRO/100B (82557, 82558)
device rl # RealTek 8129/8139
device loop # Network loopback
device mem # Memory and kernel memory devices
device io # I/O device
device random # Entropy device
device ether # Ethernet support
device tun # Packet tunnel.
device pty # Pseudo-ttys (telnet etc)
device md # Memory "disks"
device bpf # Berkeley packet filter
device snp # Snoop device - to look at pty/vty/etc..
options MSGBUF_SIZE=40960
Jonny
--
João Carlos Mendes Luís - Networking Engineer - jonny@jonny.eng.br
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?41E32C81.8090608>