Date: Thu, 22 Jun 1995 09:25:11 -0700 From: "Justin T. Gibbs" <gibbs@freefall.cdrom.com> To: mikebo@tellabs.com (Mike Borowiec) Cc: moto@cs.cmu.edu, deischen@iworks.interworks.org, gibbs@freebsd.org, questions@freebsd.org Subject: Re: FBSD 2.xR: AIC7xxx driver vs. st() driver vs. tape drives Message-ID: <199506221625.JAA15410@freefall.cdrom.com> In-Reply-To: Your message of "Thu, 22 Jun 95 09:47:37 CDT." <m0sOnXg-000jCFC@tellab5.lisle.tellabs.com>
next in thread | previous in thread | raw e-mail | index | archive | help
>Argh! >I got the error while attempting to make an 8mm 2.0.5R load tape! >I can't write to my Archive Viper QIC150 because of the > >st0(ahc1:2:0): ILLEGAL REQUEST >st0: Cannot set selected mode >st0: bad request, must be between 0 and 0 > >problem, so as a last resort I was trying to use my Exabyte... >so you see, I'm in a catch 22 (short of loading from floppy disk!). > >- Mike You only need two floppies in order to get a shell on vty4 that gives you some functionality (ie boot and root floppies). -- Justin T. Gibbs =========================================== Software Developer - Walnut Creek CDROM FreeBSD: Turning PCs into workstations ===========================================
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?199506221625.JAA15410>