Date: Sun, 10 Oct 1999 13:53:09 +0100 From: Peter Gasparro <gasparr@attglobal.net> To: freebsd-questions@FreeBSD.org Subject: Problem including Adaptec 1510 driver under 3.2-RELEASE Message-ID: <38008C35.3B2FAC62@attglobal.net>
next in thread | raw e-mail | index | archive | help
This is a multi-part message in MIME format. --------------8DA1F1CFF7DD7E608136D05C Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: 7bit Hi, I get an error "ioconf.o(.data+0xd0): undefined reference to `aicdriver'" when doing a "make". Please find attached a screen print (krnlprob.txt) of the end of the "make" and the kernel config file NOW as evidence of this. Any help would be much appreciated. Thanks in advance Peter --------------8DA1F1CFF7DD7E608136D05C Content-Type: text/plain; charset=us-ascii; name="krnlprob.txt" Content-Transfer-Encoding: 7bit Content-Disposition: inline; filename="krnlprob.txt" pc.c ../../libkern/strcat.c ../../libkern/strcmp.c ../../libkern/strcpy.c ../.. /libkern/strlen.c ../../libkern/strncmp.c ../../libkern/strncpy.c ../../libkern /udivdi3.c ../../libkern/umoddi3.c ../../pci/ide_pci.c swapkernel.c ioconf.c pa ram.c vnode_if.c config.c mkdep -a -f .newdep -O -Wreturn-type -Wcomment -Wredundant-decls -Wimplicit -Wn ested-externs -Wstrict-prototypes -Wmissing-prototypes -Wpointer-arith -Winline -Wuninitialized -Wformat -Wunused -fformat-extensions -ansi -nostdinc -I- -I. -I../.. -I../../../include -DKERNEL -DVM_STACK -include opt_global.h ../../i38 6/i386/genassym.c env MKDEP_CPP="cc -E" mkdep -a -f .newdep -x assembler-with-cpp -DLOCORE -O -Wr eturn-type -Wcomment -Wredundant-decls -Wimplicit -Wnested-externs -Wstrict-pro totypes -Wmissing-prototypes -Wpointer-arith -Winline -Wuninitialized -Wformat -Wunused -fformat-extensions -ansi -nostdinc -I- -I. -I../.. -I../../../includ e -DKERNEL -DVM_STACK -include opt_global.h -elf ../../i386/apm/apm_setup.s ../ ../i386/i386/bioscall.s ../../i386/i386/exception.s ../../i386/i386/globals.s ../../i386/i386/support.s ../../i386/i386/swtch.s ../../i386/i386/locore.s rm -f .depend mv -f .newdep .depend freebsd# make loading kernel ioconf.o(.data+0xd0): undefined reference to `aicdriver' *** Error code 1 Stop. freebsd# --------------8DA1F1CFF7DD7E608136D05C Content-Type: text/plain; charset=us-ascii; name="Now" Content-Transfer-Encoding: 7bit Content-Disposition: inline; filename="Now" # # GENERIC -- Generic machine with WD/AHx/NCR/BTx family disks # # For more information read the handbook part System Administration -> # Configuring the FreeBSD Kernel -> The Configuration File. # The handbook is available in /usr/share/doc/handbook or online as # latest version from the FreeBSD World Wide Web server # <URL:http://www.FreeBSD.ORG/>; # # An exhaustive list of options and more detailed explanations of the # device lines is present in the ./LINT configuration file. If you are # in doubt as to the purpose or necessity of a line, check first in LINT. # # $Id: GENERIC,v 1.143.2.12 1999/05/14 15:12:26 jkh Exp $ machine "i386" #cpu "I386_CPU" cpu "I486_CPU" #cpu "I586_CPU" #cpu "I686_CPU" ident NOW maxusers 32 options MATH_EMULATE #Support for x87 emulation options INET #InterNETworking options FFS #Berkeley Fast Filesystem options FFS_ROOT #FFS usable as root device [keep this!] options MFS #Memory Filesystem options MFS_ROOT #MFS usable as root device, "MFS" req'ed options NFS #Network Filesystem options NFS_ROOT #NFS usable as root device, "NFS" req'ed options MSDOSFS #MSDOS Filesystem options "CD9660" #ISO 9660 Filesystem options "CD9660_ROOT" #CD-ROM usable as root. "CD9660" req'ed options PROCFS #Process filesystem options QUOTA options "COMPAT_43" #Compatible with BSD 4.3 [KEEP THIS!] options SCSI_DELAY=5000 #Be pessimistic about Joe SCSI device options UCONSOLE #Allow users to grab the console options FAILSAFE #Be conservative options USERCONFIG #boot -c editor options VISUAL_USERCONFIG #visual boot -c editor config kernel root on wd0 # To make an SMP kernel, the next two are needed #options SMP # Symmetric MultiProcessor Kernel #options APIC_IO # Symmetric (APIC) I/O # Optionally these may need tweaked, (defaults shown): #options NCPU=2 # number of CPUs #options NBUS=4 # number of busses #options NAPIC=1 # number of IO APICs #options NINTR=24 # number of INTs controller isa0 controller pnp0 controller eisa0 controller pci0 controller fdc0 at isa? port "IO_FD1" bio irq 6 drq 2 disk fd0 at fdc0 drive 0 disk fd1 at fdc0 drive 1 options "CMD640" # work around CMD640 chip deficiency controller wdc0 at isa? port "IO_WD1" bio irq 14 disk wd0 at wdc0 drive 0 disk wd1 at wdc0 drive 1 controller wdc1 at isa? port "IO_WD2" bio irq 15 disk wd2 at wdc1 drive 0 disk wd3 at wdc1 drive 1 options ATAPI #Enable ATAPI support for IDE bus options ATAPI_STATIC #Don't do it as an LKM device acd0 #IDE CD-ROM device wfd0 #IDE Floppy (e.g. LS-120) # A single entry for any of these controllers (ncr, ahb, ahc) is # sufficient for any number of installed devices. #controller ncr0 #controller ahb0 #controller ahc0 controller isp0 # This controller offers a number of configuration options, too many to # document here - see the LINT file in this directory and look up the # dpt0 entry there for much fuller documentation on this. controller dpt0 # controller adv0 at isa? port ? cam irq ? # controller adw0 #controller bt0 at isa? port ? cam irq ? # controller aha0 at isa? port ? cam irq ? controller aic0 at isa? port 0x340 bio irq 11 controller scbus0 at aic0 device sd0 at scbus0 target 0 device da0 device sa0 device pass0 device cd0 #Only need one of these, the code dynamically grows #device wt0 at isa? port 0x300 bio irq 5 drq 1 #device mcd0 at isa? port 0x300 bio irq 10 #controller matcd0 at isa? port 0x230 bio #device scd0 at isa? port 0x230 bio # atkbdc0 controlls both the keyboard and the PS/2 mouse controller atkbdc0 at isa? port IO_KBD tty device atkbd0 at isa? tty irq 1 #device psm0 at isa? tty irq 12 device vga0 at isa? port ? conflicts # splash screen/screen saver pseudo-device splash # syscons is the default console driver, resembling an SCO console device sc0 at isa? tty # Enable this and PCVT_FREEBSD for pcvt vt220 compatible console driver #device vt0 at isa? tty #options XSERVER # support for X server #options FAT_CURSOR # start with block cursor # If you have a ThinkPAD, uncomment this along with the rest of the PCVT lines #options PCVT_SCANSET=2 # IBM keyboards are non-std device npx0 at isa? port IO_NPX irq 13 # # Laptop support (see LINT for more options) # device apm0 at isa? disable flags 0x31 # Advanced Power Management # PCCARD (PCMCIA) support #controller card0 #device pcic0 at card? #device pcic1 at card? device sio0 at isa? port "IO_COM1" flags 0x10 tty irq 4 device sio1 at isa? port "IO_COM2" tty irq 3 device sio2 at isa? disable port "IO_COM3" tty irq 5 device sio3 at isa? disable port "IO_COM4" tty irq 9 # Parallel port device ppc0 at isa? port? flags 0x40 net irq 7 controller ppbus0 device lpt0 at ppbus? device plip0 at ppbus? device ppi0 at ppbus? #controller vpo0 at ppbus? # # The following Ethernet NICs are all PCI devices. # #device ax0 # ASIX AX88140A #device de0 # DEC/Intel DC21x4x (``Tulip'') #device fxp0 # Intel EtherExpress PRO/100B (82557, 82558) #device mx0 # Macronix 98713/98715/98725 (``PMAC'') #device pn0 # Lite-On 82c168/82c169 (``PNIC'') #device rl0 # RealTek 8129/8139 #device tl0 # Texas Instruments ThunderLAN #device tx0 # SMC 9432TX (83c170 ``EPIC'') #device vr0 # VIA Rhine, Rhine II #device vx0 # 3Com 3c590, 3c595 (``Vortex'') #device wb0 # Winbond W89C840F #device xl0 # 3Com 3c90x (``Boomerang'', ``Cyclone'') # Order is important here due to intrusive probes, do *not* alphabetize # this list of network interfaces until the probes have been fixed. # Right now it appears that the ie0 must be probed before ep0. See # revision 1.20 of this file. device ed0 at isa? port 0x280 net irq 10 iomem 0xd8000 #device ie0 at isa? port 0x300 net irq 10 iomem 0xd0000 #device ep0 at isa? port 0x300 net irq 10 #device ex0 at isa? port? net irq? #device fe0 at isa? port 0x300 net irq ? #device le0 at isa? port 0x300 net irq 5 iomem 0xd0000 #device lnc0 at isa? port 0x280 net irq 10 drq 0 # device ze0 at isa? port 0x300 net irq 10 iomem 0xd8000 # device zp0 at isa? port 0x300 net irq 10 iomem 0xd8000 #device cs0 at isa? port 0x300 net irq ? pseudo-device loop pseudo-device ether pseudo-device sl 1 pseudo-device ppp 1 pseudo-device tun 1 pseudo-device pty 16 pseudo-device gzip # Exec gzipped a.out's # KTRACE enables the system-call tracing facility ktrace(2). # This adds 4 KB bloat to your kernel, and slightly increases # the costs of each syscall. options KTRACE #kernel tracing # This provides support for System V shared memory and message queues. # options SYSVSHM options SYSVMSG options SYSVSEM # The `bpfilter' pseudo-device enables the Berkeley Packet Filter. Be # aware of the legal and administrative consequences of enabling this # option. The number of devices determines the maximum number of # simultaneous BPF clients programs runnable. #pseudo-device bpfilter 4 #Berkeley packet filter pseudo-device speaker --------------8DA1F1CFF7DD7E608136D05C-- To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?38008C35.3B2FAC62>