Date: Tue, 23 Oct 2012 17:58:15 +0200 From: ds <dk-sk@skynet.be> To: Mark <redtick@sbcglobal.net>, freebsd-questions@freebsd.org Cc: dk-sk@skynet.be Subject: Re: supermicro sat2-mv8 sata raid card driver in Freebsd 9.0 Message-ID: <5086BE97.9010507@skynet.be> In-Reply-To: <1351002747.17477.YahooMailClassic@web184305.mail.ne1.yahoo.com> References: <1351002747.17477.YahooMailClassic@web184305.mail.ne1.yahoo.com>
next in thread | previous in thread | raw e-mail | index | archive | help
Hi, I prepared an USB stick and added the /boot/loader.conf file with "hw.hptrr.attach_generic=0" and it still didn't work : "pciconf -lv" still showed the hptrr driver attached to the sat2-mv8 card and no harddisks were detected. So I removed the /boot/loader.conf file and added the same line ("hw.hptrr.attach_generic=0") to /boot/defaults/loader.conf and guess what ! It still doesn't work... Just for the peace of mind I verified one more time if linux did recognize the controller and indeed, it did. Anyway, as you know, linux is a pain in the ass for someone who's accustomed to FreeBSD so I bought a cheap PCI-X controller on ebay today, as a temporary solution for replacing my current PCI sata controller which is occupying a PCI slot I desperately need. Are there any plans to fix this supermicro sat2-mv8 card problem in the upcoming 9.1 release ? kind regards, Dirk On 10/23/12 16:32, Mark wrote: > It would not hurt to try. =) > > > People sleep peaceably in their beds at night only because rough men stand ready to do violence on their behalf. > George Orwell > > > --- On Tue, 10/23/12, ds<dk-sk@skynet.be> wrote: > >> From: ds<dk-sk@skynet.be> >> Subject: Re: supermicro sat2-mv8 sata raid card driver in Freebsd 9.0 >> To: "Mark"<redtick@sbcglobal.net> >> Cc: dk-sk@skynet.be >> Date: Tuesday, October 23, 2012, 9:19 AM >> I'm using a CD to install freebsd 9.0 >> on a computer. Removing the mv8 >> card wont't help me since I haven't got any sata interfaces >> on my >> motherboard. >> >> Any idea if installing from an USB image would help if I >> removed the >> hptrr.ko module before installing from USB-stick ? >> >> Kind regards, >> Dirk >> >> >> the system on On 10/23/12 16:13, Mark wrote: >>> Are you using a cd to install on the computer or to run >> the computer from the cd? >>> I had to remove the mv8 card, install the system, then >> alter the /boot/loader.config to ignore the hptrr driver. >>> add this line to disable "hw.hptrr.attach_generic=0" >>> >>> If you booting from a live cd each time I think you >> will need to create your own live cd with a custom kernel >>> >>> >>> People sleep peaceably in their beds at night only >> because rough men stand ready to do violence on their >> behalf. >>> George Orwell >>> >>> >>> --- On Tue, 10/23/12, ds<dk-sk@skynet.be> >> wrote: >>>> From: ds<dk-sk@skynet.be> >>>> Subject: Re: supermicro sat2-mv8 sata raid card >> driver in Freebsd 9.0 >>>> To: "Mark"<redtick@sbcglobal.net>, >> freebsd-questions@freebsd.org >>>> Cc: dk-sk@skynet.be >>>> Date: Tuesday, October 23, 2012, 8:28 AM >>>> Hello, >>>> >>>> the driver for the supermicro sat2-mv8 card >> (88sx61xx >>>> chip) is in the >>>> kernel (mvs.ko module) indeed. >>>> But the kernel keeps loading the wrong driver >> (hptrr.ko) : >>>> even when I >>>> escape to the loaderprompt before booting the >> kernel and >>>> give the >>>> command "unload hptrr.ko" or "disable-module hptrr" >> , the >>>> command >>>> "pciconf" -lv still shows the hptrr driver attached >> to the >>>> sat2-mv8 card >>>> (hptrr@pci0:3:1:0) when the system is booted from >> the boot >>>> CD. >>>> >>>> So how can I resolve this problem without editing >> the >>>> iso-image of the >>>> boot CD or DVD and getting rid of the hptrr.ko >> module ? >>>> kind regards, >>>> Dirk >>>> >>>> >>>> On 10/22/12 16:47, Mark wrote: >>>>> The driver is in the kernel. >>>>> >>>>> See if this will help. >>>>> >>>>> http://lists.freebsd.org/pipermail/freebsd-current/2010-June/017810.html >>>>> >>>>> >>>>> People sleep peaceably in their beds at night >> only >>>> because rough men stand ready to do violence on >> their >>>> behalf. >>>>> George Orwell >>>>> >>>>> HTH >>>>> >>>>> >>>>> --- On Mon, 10/22/12, ds<dk-sk@skynet.be> >>>> wrote: >>>>>> From: ds<dk-sk@skynet.be> >>>>>> Subject: supermicro sat2-mv8 sata raid card >> driver >>>>>> To: freebsd-questions@freebsd.org >>>>>> Cc: dk-sk@skynet.be >>>>>> Date: Monday, October 22, 2012, 9:14 AM >>>>>> Hello, >>>>>> >>>>>> are there any plans to provide a driver for >> the >>>> supermicro >>>>>> sat2-mv8 (8-port) sata raid card ? >>>>>> >>>>>> Kind regards, >>>>>> Dirk >>>>>> >> _______________________________________________ >>>>>> freebsd-questions@freebsd.org >>>>>> mailing list >>>>>> http://lists.freebsd.org/mailman/listinfo/freebsd-questions >>>>>> To unsubscribe, send any mail to "freebsd-questions-unsubscribe@freebsd.org" >>>>>> >>
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?5086BE97.9010507>