Date: Mon, 22 Jul 1996 23:22:09 -0400 From: Gary Chrysler <tcg@ime.net> To: dwhite@resnet.uoregon.edu Cc: Bogusz Jelinski <jelinski@rose.man.poznan.pl>, questions@FreeBSD.org Subject: Re: Problem with setting up an internal modem Message-ID: <31F44560.5615@ime.net> References: <Pine.BSI.3.94.960722143703.318I-100000@gdi.uoregon.edu>
next in thread | previous in thread | raw e-mail | index | archive | help
Doug White wrote: > > On Mon, 22 Jul 1996, Bogusz Jelinski wrote: > > > I have problems with configuring my internal modem (Zomm v.32 bis) under > > FreeBSD. The problem is that the configuration is ok. but the > > modem does not answer calls because the getty process executes > > login without waiting for a call (problem with carrier detection). > > What I see after ps -ax is > > > > d3 I<s+ login -p login: l > > You need to set your modem to follow Carrier Detect. This is AT&C1 in the > Hayes command set. Also set to use hardware flow control: AT&K3 and drop > DTR to hangup. (I'm reading the Supra command set and it's unclear what > the proper setting is. It should do it by default though) > > You also need to set quiet mode with ATQ1 and no command echo with ATE0. > > Then write the settings down with AT&W. > Add AT&D2 to disconnect on loss of DTR. AT&C1&D2 should be all you need, The rest are usual defaults in the Zoom. Of course write them with AT&W as Doug mentioned. Dosn't the modem have to answer the phone?? ie: ATS0=x, Where x is >0 & <256 the ring to answer on. Zero means don't answer. Defaults are usually Zero ... Thus ATS0=x should be added before writing. -Enjoy Gary ~~~~~~~~~~~~~~~~ Improve America's Knowledge... Share yours The Borg... Where minds meet (207) 929-3848
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?31F44560.5615>