Date: Mon, 11 Dec 2006 15:55:45 -0500 From: John Baldwin <jhb@freebsd.org> To: freebsd-current@freebsd.org Cc: Peter Losher <Peter_Losher@isc.org> Subject: Re: FreeBSD 6 (or 7) on a HP DL140 G3 SATA Message-ID: <200612111555.45792.jhb@freebsd.org> In-Reply-To: <4578E1AD.3090505@isc.org> References: <4578E1AD.3090505@isc.org>
next in thread | previous in thread | raw e-mail | index | archive | help
On Thursday 07 December 2006 22:53, Peter Losher wrote: > Just got my hands on a HP DL140 G3 (generation 3) server, which has a > LSI Logic SAS controller. You can run the live CD or install FreeBSD > (6.2-RC1 or 7-CURRENT) onto the HD's, but when you boot from the disks, > the boot loader barfs: > > -=- > int=0000000d err=0000001a efl=00030287 eip=0000291d > eax=1400000a ebx=00000b3e ecx=00000000 edx=0000c900 > esi=00000d1c edi=00000001 ebp=00000206 esp=00000200 > cs=c900 ds=9a00 es=9a00 fs=0000 gs=0000 ss=9a00 > cs:eip=cc 68 32 06 ff 34 e8 db-fc 83 c4 04 89 46 fe 5f > 5e c9 c3 55 8b ec 1e 33-c0 8e d8 a0 75 04 3c 00 > ss:esp=1c 0d 02 00 00 00 34 02-d8 45 1c 0d 00 00 00 14 > 00 00 00 00 01 00 00 00-1c 0d 02 00 00 00 00 00 > BTX halted > -=- > > Here is the relevant BIOS output from the controller: This was just fixed a few days ago. If re@ did a new snap over the weekend try that as it should have the fix. -- John Baldwin
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?200612111555.45792.jhb>