Date: Tue, 11 Mar 2003 14:56:36 +0200 (GMT+02:00) From: "< shpokas >" <shpokas@one.lv> To: "freebsd-mobile@freebsd.org" <freebsd-mobile@freebsd.org> Subject: 5.0 Release and Xircom CEM56-100 Message-ID: <17385796.1047387396914.JavaMail.root@www2.one.lv>
next in thread | raw e-mail | index | archive | help
hello all,
the question is short: how to get this card to work under 5.0 RELEASE
card is Xircom CreditCard Ethernet 10/100+ Modem 56 (CEM56-100)
search in mailing lists and newsgroups did not give me much information so far.
i boot freeBSD on HP Omnibook 6000 with acpi disabled (buggy vendor implementation crash system immediately) and apm enabled (also tried with apm disabled)
kernel is recompiled, with xe de and miibus drivers in (+others, of course)
please find dmesg, pciconf -vl and kernel conf below:
dmesg:
Copyright (c) 1992-2003 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD 5.0-RELEASE #2: Tue Mar 11 11:17:54 EET 2003
root@ivarssob.latvia.hp.com:/usr/src/sys/i386/compile/STRAZDS
Preloaded elf kernel "/boot/kernel/kernel" at 0xc04bf000.
Preloaded elf module "/boot/kernel/snd_maestro3.ko" at 0xc04bf0c0.
Preloaded elf module "/boot/kernel/snd_pcm.ko" at 0xc04bf174.
Timecounter "i8254" frequency 1193194 Hz
CPU: Pentium III/Pentium III Xeon/Celeron (647.19-MHz 686-class CPU)
Origin = "GenuineIntel" Id = 0x683 Stepping = 3
Features=0x383f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE>
real memory = 268369920 (255 MB)
avail memory = 255557632 (243 MB)
Initializing GEOMetry subsystem
netsmb_dev: loaded
Pentium Pro MTRR support enabled
npx0: <math processor> on motherboard
npx0: INT 16 interface
Using $PIR table, 9 entries at 0xc00fdf30
apm0: <APM BIOS> on motherboard
apm0: found APM BIOS v1.2, connected at v1.2
pcib0: <Intel 82443BX (440 BX) host to PCI bridge> at pcibus 0 on motherboard
pci0: <PCI bus> on pcib0
agp0: <Intel 82443BX (440 BX) host to PCI bridge> mem 0xf8000000-0xfbffffff at device 0.0 on pci0
pcib1: <PCIBIOS PCI-PCI bridge> at device 1.0 on pci0
pci1: <PCI bus> on pcib1
pci1: <display, VGA> at device 0.0 (no driver attached)
isab0: <PCI-ISA bridge> at device 7.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel PIIX4 ATA33 controller> port 0x18a0-0x18af at device 7.1 on pci0
ata0: at 0x1f0 irq 14 on atapci0
ata1: at 0x170 irq 15 on atapci0
uhci0: <Intel 82371AB/EB (PIIX4) USB controller> port 0x1880-0x189f irq 10 at device 7.2 on pci0
usb0: <Intel 82371AB/EB (PIIX4) USB controller> on uhci0
usb0: USB revision 1.0
uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
intpm0: <Intel 82371AB Power management controller> port 0x2180-0x218f irq 9 at device 7.3 on pci0
intpm0: I/O mapped 2180
intpm0: intr IRQ 9 enabled revision 0
smbus0: <System Management Bus> on intsmb0
intpm0: PM I/O mapped 8000
cbb0: <TI1420 PCI-CardBus Bridge> at device 10.0 on pci0
cardbus0: <CardBus bus> on cbb0
pccard0: <16-bit PCCard bus> on cbb0
pci_cfgintr: 0:10 INTA routed to irq 10
cbb1: <TI1420 PCI-CardBus Bridge> at device 10.1 on pci0
cardbus1: <CardBus bus> on cbb1
pccard1: <16-bit PCCard bus> on cbb1
pci_cfgintr: 0:10 INTB routed to irq 10
xl0: <3Com 3c556 Fast Etherlink XL> port 0x1800-0x187f mem 0xf4002000-0xf400207f,0xf4002400-0xf400247f irq 10 at device 11.0 on pci0
xl0: Ethernet address: 00:00:86:4a:1c:e2
miibus0: <MII bus> on xl0
ukphy0: <Generic IEEE 802.3u media interface> on miibus0
ukphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
pci0: <simple comms> at device 11.1 (no driver attached)
pcm0: <ESS Technology Maestro3> port 0x1400-0x14ff mem 0xf4000000-0xf4001fff irq 5 at device 13.0 on pci0
orm0: <Option ROMs> at iomem 0xcd800-0xcdfff,0xc0000-0xcd7ff on isa0
pmtimer0 on isa0
atkbdc0: <Keyboard controller (i8042)> at port 0x64,0x60 on isa0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
kbd0 at atkbd0
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: model IntelliMouse, device ID 3
fdc0: <Enhanced floppy controller (i82077, NE72065 or clone)> at port 0x3f7,0x3f0-0x3f5 irq 6 drq 2 on isa0
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
ppc0: parallel port not found.
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 16550A
sio1 at port 0x2f8-0x2ff irq 3 on isa0
sio1: type 16550A
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
unknown: <PNP0c02> can't assign resources (port)
unknown: <PNP0303> can't assign resources (port)
psmcpnp0: irq resource info is missing; assuming irq 12
unknown: <PNP0501> can't assign resources (port)
unknown: <NSC6001> can't assign resources (port)
unknown: <PNP0700> can't assign resources (port)
Timecounters tick every 10.000 msec
WARNING: apm_saver module requires apm enabled
pccard0: Card has no functions!
cbb0: PC Card card activation failed
ad0: 28615MB <IC25N030ATCS04-0> [58140/16/63] at ata0-master UDMA33
acd0: CDROM <CD-224E> at ata1-master PIO4
---------------------------------------
pciconf -vl
agp0@pci0:0:0: class=0x060000 card=0x00000000 chip=0x71908086 rev=0x03 hdr=0x00
vendor = 'Intel Corporation'
device = '82443BX/ZX 440BX/ZX CPU to PCI Bridge (AGP Implemented)'
class = bridge
subclass = HOST-PCI
pcib1@pci0:1:0: class=0x060400 card=0x00000000 chip=0x71918086 rev=0x03 hdr=0x01
vendor = 'Intel Corporation'
device = '82443BX/ZX 440BX/ZX AGPset PCI-to-PCI bridge'
class = bridge
subclass = PCI-PCI
isab0@pci0:7:0: class=0x068000 card=0x00000000 chip=0x71108086 rev=0x02 hdr=0x00
vendor = 'Intel Corporation'
device = '82371AB/EB/MB PIIX4/4E/4M ISA Bridge'
class = bridge
subclass = PCI-unknown
atapci0@pci0:7:1: class=0x010180 card=0x00000000 chip=0x71118086 rev=0x01 hdr=0x00
vendor = 'Intel Corporation'
device = '82371AB/EB/MB PIIX4/4E/4M IDE Controller'
class = mass storage
subclass = ATA
uhci0@pci0:7:2: class=0x0c0300 card=0x00000000 chip=0x71128086 rev=0x01 hdr=0x00
vendor = 'Intel Corporation'
device = '82371AB/EB/MB PIIX4/4E/4M USB Interface'
class = serial bus
subclass = USB
intpm0@pci0:7:3: class=0x068000 card=0x00000000 chip=0x71138086 rev=0x03 hdr=0x00
vendor = 'Intel Corporation'
device = '82371AB/EB/MB PIIX4/4E/4M Power Management Controller'
class = bridge
subclass = PCI-unknown
cbb0@pci0:10:0: class=0x060700 card=0x0010103c chip=0xac51104c rev=0x00 hdr=0x02
vendor = 'Texas Instruments (TI)'
device = 'PCI1420 PC card CardBus Controller'
class = bridge
subclass = PCI-CardBus
cbb1@pci0:10:1: class=0x060700 card=0x0010103c chip=0xac51104c rev=0x00 hdr=0x02
vendor = 'Texas Instruments (TI)'
device = 'PCI1420 PC card CardBus Controller'
class = bridge
subclass = PCI-CardBus
xl0@pci0:11:0: class=0x020000 card=0x625610b7 chip=0x605510b7 rev=0x10 hdr=0x00
vendor = '3COM Corp, Networking Division'
device = '3C556 10/100 Mini PCI Fast Ethernet Adapter'
class = network
subclass = ethernet
none0@pci0:11:1: class=0x078000 card=0x615810b7 chip=0x100710b7 rev=0x10 hdr=0x00
vendor = '3COM Corp, Networking Division'
device = '3C556 V.90 Mini-PCI Modem'
class = simple comms
pcm0@pci0:13:0: class=0x040100 card=0x0010103c chip=0x1998125d rev=0x00 hdr=0x00
vendor = 'ESS Technology'
device = 'ES1980 Maestro-3 PCI Audio Accelerator'
class = bridge
subclass = PCI-CardBus
cbb1@pci0:10:1: class=0x060700 card=0x0010103c chip=0xac51104c rev=0x00 hdr=0x02
vendor = 'Texas Instruments (TI)'
device = 'PCI1420 PC card CardBus Controller'
class = bridge
subclass = PCI-CardBus
xl0@pci0:11:0: class=0x020000 card=0x625610b7 chip=0x605510b7 rev=0x10 hdr=0x00
vendor = '3COM Corp, Networking Division'
device = '3C556 10/100 Mini PCI Fast Ethernet Adapter'
class = network
subclass = ethernet
none0@pci0:11:1: class=0x078000 card=0x615810b7 chip=0x100710b7 rev=0x10 hdr=0x00
vendor = '3COM Corp, Networking Division'
device = '3C556 V.90 Mini-PCI Modem'
class = simple comms
pcm0@pci0:13:0: class=0x040100 card=0x0010103c chip=0x1998125d rev=0x00 hdr=0x00
vendor = 'ESS Technology'
device = 'ES1980 Maestro-3 PCI Audio Accelerator'
class = multimedia
subclass = audio
none1@pci1:0:0: class=0x030000 card=0x0010103c chip=0x4c4d1002 rev=0x64 hdr=0x00
vendor = 'ATI Technologies'
device = '01541014 Rage P/M Mobility AGP 2x'
class = display
subclass = VGA
--------------------------------------------------------
kernel config (grep '^#' | grep '.')
machine i386
cpu I686_CPU
ident STRAZDS
maxusers 0
options INET #InterNETworking
options FFS #Berkeley Fast Filesystem
options SOFTUPDATES #Enable FFS soft updates support
options UFS_ACL #Support for access control lists
options UFS_DIRHASH #Improve performance on big directories
options MD_ROOT #MD is a potential root device
options NFSCLIENT #Network Filesystem Client
options NFS_ROOT #NFS usable as root device, requires NFSCLIENT
options MSDOSFS #MSDOS Filesystem
options CD9660 #ISO 9660 Filesystem
options PROCFS #Process filesystem (requires PSEUDOFS)
options PSEUDOFS #Pseudo-filesystem framework
options SMBFS #SMB/CIFS filesystem
options EXT2FS #Linux ext2 filesystem
options NETSMB #SMB/CIFS requester
options NETSMBCRYPTO #encrypted password support for SMB
options LIBMCHAIN
options LIBICONV
options COMPAT_43 #Compatible with BSD 4.3 [KEEP THIS!]
options COMPAT_FREEBSD4 #Compatible with FreeBSD4
options SCSI_DELAY=15000 #Delay (in ms) before probing SCSI
options KTRACE #ktrace(1) support
options SYSVSHM #SYSV-style shared memory
options SYSVMSG #SYSV-style message queues
options SYSVSEM #SYSV-style semaphores
options _KPOSIX_PRIORITY_SCHEDULING #Posix P1003_1B real-time extensions
options KBD_INSTALL_CDEV # install a CDEV entry in /dev
options AHC_REG_PRETTY_PRINT # Print register bitfields in debug
# output. Adds ~128k to driver.
options AHD_REG_PRETTY_PRINT # Print register bitfields in debug
# output. Adds ~215k to driver.
options CLK_USE_I8254_CALIBRATION
options CLK_USE_TSC_CALIBRATION
device gzip #Exec gzipped a.out's. REQUIRES COMPAT_AOUT!
device apm_saver # Requires APM
options COMPAT_LINUX
options COMPAT_AOUT
device "r128drm"
device radeondrm
options DRM_LINUX
options INVARIANT_SUPPORT #Extra sanity checks of internal structures, required by INVARIANTS
device isa
device pci
device fdc
device ata
device atadisk # ATA disk drives
device atapicd # ATAPI CDROM drives
device atapifd # ATAPI floppy drives
options ATA_STATIC_ID #Static device numbering
device scbus # SCSI bus (required)
device atkbdc # AT keyboard controller
device atkbd # AT keyboard
device psm # PS/2 mouse
device vga # VGA video card driver
device splash # Splash screen and screen saver support
device sc
device agp # support several AGP chipsets
device npx
device apm
device pmtimer
device cbb # cardbus (yenta) bridge
device pccard # PC Card (16-bit) bus
device cardbus # CardBus (32-bit) bus
device smbus # Bus support, required for smb below.
device intpm
device sio # 8250, 16[45]50 based serial ports
device ppc
device ppbus # Parallel port bus (required)
device lpt # Printer
device plip # TCP/IP over parallel
device ppi # Parallel port interface device
device miibus # MII bus support
device dc # DEC/Intel 21143 and various workalikes
device dc # DEC/Intel 21143 and various workalikes
device xl # 3Com 3c90x (``Boomerang'', ``Cyclone'')
device xe # Xircom pccard ethernet
device random # Entropy device
device loop # Network loopback
device ether # Ethernet support
device sl # Kernel SLIP
device ppp # Kernel PPP
device tun # Packet tunnel.
device pty # Pseudo-ttys (telnet etc)
device md # Memory "disks"
device gif # IPv6 and IPv4 tunneling
device faith # IPv6-to-IPv4 relaying (translation)
options PPP_BSDCOMP #PPP BSD-compress support
options PPP_DEFLATE #PPP zlib/deflate/gzip support
options PPP_FILTER #enable bpf filtering (needs bpf)
device bpf # Berkeley packet filter
device uhci # UHCI PCI->USB interface
device ohci # OHCI PCI->USB interface
device usb # USB Bus (required)
device ugen # Generic
device uhid # "Human Interface Devices"
device ukbd # Keyboard
device ulpt # Printer
device umass # Disks/Mass storage - Requires scbus and da
device ums # Mouse
many thanks already before,
shpokas
-------------------------------------------------------------------------------
http://www.one.lv - Tavs mobilais e-pasts!
Tagad lasi savu e-pastu ar mobilo telefonu - wap.one.lv!
To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-mobile" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?17385796.1047387396914.JavaMail.root>