Date: Wed, 15 Oct 2025 15:34:19 +0000 (GMT) From: jenkins-admin@FreeBSD.org To: ivy@FreeBSD.org, dev-ci@FreeBSD.org Cc: jenkins-admin@FreeBSD.org Subject: FreeBSD-stable-15-amd64-test - Build #73 - Still Failing Message-ID: <808828242.1443.1760542459652@jenkins.ci.freebsd.org> In-Reply-To: <1641119568.1409.1760515530470@jenkins.ci.freebsd.org>
index | next in thread | previous in thread | raw e-mail
FreeBSD-stable-15-amd64-test - Build #73 (9dab0e61a921b5f3c4db2e0e2b440aeb6a803e42) - Still Failing Build information: https://ci.FreeBSD.org/job/FreeBSD-stable-15-amd64-test/73/ Full change log: https://ci.FreeBSD.org/job/FreeBSD-stable-15-amd64-test/73/changes Full build log: https://ci.FreeBSD.org/job/FreeBSD-stable-15-amd64-test/73/console Status explanation: "Failure" - the build is suspected being broken by the following changes "Still Failing" - the build has not been fixed by the following changes and this is a notification to note that these changes have not been fully tested by the CI system Change summaries: (Those commits are likely but not certainly responsible) f1b0e00d56a8b01be86ff41a05cb6916727cee8a by ivy: packages: Rename unbound to local-unbound 9dab0e61a921b5f3c4db2e0e2b440aeb6a803e42 by ivy: ncurses: Add an ncurses-lib package The end of the build log: [...truncated 4.32 MiB...] epair0b: Ethernet address: 5a:c8:0a:91:8e:d1 epair0a: link state changed to UP epair0b: link state changed to UP epair1a: Ethernet address: a6:b6:90:bb:f7:f7 epair1b: Ethernet address: 4e:fc:a1:b8:48:d0 epair1a: link state changed to UP epair1b: link state changed to UP epair1b: link state changed to DOWN epair1a: link state changed to DOWN epair0a: link state changed to DOWN epair0b: link state changed to DOWN failed: atf-check failed; see the output of the test for details [0.149s] sys/netpfil/pf/nat64:tcp_in_floating -> epair0a: Ethernet address: a6:f7:71:c1:ee:5c epair0b: Ethernet address: ba:00:a5:6b:1e:64 epair0a: link state changed to UP epair0b: link state changed to UP epair1a: Ethernet address: 0e:f3:af:2f:f2:15 epair1b: Ethernet address: 32:c5:a8:8f:a4:43 epair1a: link state changed to UP epair1b: link state changed to UP epair1b: link state changed to DOWN epair1a: link state changed to DOWN epair0a: link state changed to DOWN epair0b: link state changed to DOWN failed: atf-check failed; see the output of the test for details [0.148s] sys/netpfil/pf/nat64:tcp_in_if_bound -> epair0a: Ethernet address: a2:ca:0d:c9:a3:90 epair0b: Ethernet address: a6:9b:04:f4:01:40 epair0a: link state changed to UP epair0b: link state changed to UP epair1a: Ethernet address: 06:33:54:c2:54:17 epair1b: Ethernet address: 6e:d9:7e:05:44:cf epair1a: link state changed to UP epair1b: link state changed to UP epair1b: link state changed to DOWN epair1a: link state changed to DOWN epair0a: link state changed to DOWN epair0b: link state changed to DOWN failed: atf-check failed; see the output of the test for details [0.140s] sys/netpfil/pf/nat64:tcp_out_floating -> epair0a: Ethernet address: a6:fa:2c:a9:33:03 epair0b: Ethernet address: fa:2f:ff:0f:98:4b epair0a: link state changed to UP epair0b: link state changed to UP epair1a: Ethernet address: 8e:b8:82:e0:b9:dc epair1b: Ethernet address: a2:ee:fe:70:b5:9b epair1a: link state changed to UP epair1b: link state changed to UP epair1b: link state changed to DOWN epair1a: link state changed to DOWN epair0a: link state changed to DOWN epair0b: link state changed to DOWN failed: atf-check failed; see the output of the test for details [0.171s] sys/netpfil/pf/nat64:tcp_out_if_bound -> epair0a: Ethernet address: 96:85:50:85:39:74 epair0b: Ethernet address: 8a:0d:de:2e:f2:af epair0a: link state changed to UP epair0b: link state changed to UP epair1a: Ethernet address: fa:37:7c:34:fe:f3 epair1b: Ethernet address: 52:96:90:f7:fb:98 epair1a: link state changed to UP epair1b: link state changed to UP epair1b: link state changed to DOWN epair1a: link state changed to DOWN epair0a: link state changed to DOWN epair0b: link state changed to DOWN failed: atf-check failed; see the output of the test for details [0.150s] sys/netpfil/pf/nat64:tos -> epair0a: Ethernet address: 0a:29:87:a4:98:02 epair0b: Ethernet address: 22:f9:fa:42:42:75 epair0a: link state changed to UP epair0b: link state changed to UP epair1a: Ethernet address: 7a:2b:79:fb:93:3e epair1b: Ethernet address: 26:5f:49:f7:7c:f2 epair1a: link state changed to UP epair1b: link state changed to UP epair1b: link state changed to DOWN epair1a: link state changed to DOWN epair0a: link state changed to DOWN epair0b: link state changed to DOWN failed: atf-check failed; see the output of the test for details [0.140s] sys/netpfil/pf/nat64:udp_in -> epair0a: Ethernet address: 46:aa:8b:2f:ba:29 epair0b: Ethernet address: aa:03:a7:4c:68:b4 epair0a: link state changed to UP epair0b: link state changed to UP epair1a: Ethernet address: f2:fd:d1:0e:88:13 epair1b: Ethernet address: ca:e5:c7:16:73:1c epair1a: link state changed to UP epair1b: link state changed to UP epair1b: link state changed to DOWN epair1a: link state changed to DOWN epair0a: link state changed to DOWN epair0b: link state changed to DOWN failed: atf-check failed; see the output of the test for details [0.139s] sys/netpfil/pf/nat64:udp_out -> epair0a: Ethernet address: ca:ad:bc:34:a9:9e epair0b: Ethernet address: e6:f0:ca:66:dc:c7 epair0a: link state changed to UP epair0b: link state changed to UP epair1a: Ethernet address: be:7f:53:4f:cb:f3 epair1b: Ethernet address: 8e:b1:72:dd:57:92 epair1a: link state changed to UP epair1b: link state changed to UP epair1b: link state changed to DOWN epair1a: link state changed to DOWN epair0a: link state changed to DOWN epair0b: link state changed to DOWN failed: atf-check failed; see the output of the test for details [0.189s] sys/netpfil/pf/nat64:v6_gateway -> epair0a: Ethernet address: d2:80:34:06:40:90 epair0b: Ethernet address: 06:5c:c3:23:f8:6e epair0a: link state changed to UP epair0b: link state changed to UP epair1a: Ethernet address: 72:fc:f9:7b:02:03 epair1b: Ethernet address: 86:e3:37:8c:d4:7d epair1a: link state changed to UP epair1b: link state changed to UP epair2a: Ethernet address: a6:f7:94:5f:68:bb epair2b: Ethernet address: 16:a4:f0:e9:bc:b0 epair2a: link state changed to UP epair2b: link state changed to UP epair2b: link state changed to DOWN epair2a: link state changed to DOWN epair1a: link state changed to DOWN epair1b: link state changed to DOWN epair0a: link state changed to DOWN epair0b: link state changed to DOWN failed: atf-check failed; see the output of the test for details [0.219s] sys/netpfil/pf/nat64.py:TestNAT64::test_address_unreachable -> epair0a: Ethernet address: 12:77:84:8e:a4:88 epair0b: Ethernet address: fa:34:50:5e:26:7d epair0a: link state changed to UP epair0b: link state changed to UP epair1a: Ethernet address: ea:a6:25:6a:df:59 epair1b: Ethernet address: 72:5d:4a:75:bd:38 epair1a: link state changed to UP epair1b: link state changed to UP epair2a: Ethernet address: 4a:33:89:6b:37:b8 epair2b: Ethernet address: 02:bd:b3:af:05:7f epair2a: link state changed to UP epair2b: link state changed to UP lo0: link state changed to UP lo0: link state changed to UP lo0: link state changed to UP lo0: link state changed to UP lo0: promiscuous mode enabled lo0: promiscuous mode disabled epair1a: link state changed to DOWN epair1b: link state changed to DOWN epair2a: link state changed to DOWN epair2b: link state changed to DOWN epair0a: link state changed to DOWN epair0b: link state changed to DOWN failed: /usr/tests/sys/netpfil/pf/nat64.py:173: AttributeError [5.422s] sys/netpfil/pf/nat64.py:TestNAT64::test_bad_len -> epair0a: Ethernet address: 96:fe:73:cd:8e:62 epair0b: Ethernet address: 16:0a:71:14:3e:06 epair0a: link state changed to UP epair0b: link state changed to UP epair1a: Ethernet address: 7a:9f:b0:99:4b:45 epair1b: Ethernet address: a6:6d:82:1d:43:25 epair1a: link state changed to UP epair1b: link state changed to UP epair2a: Ethernet address: 06:14:e1:a6:de:cd epair2b: Ethernet address: 96:6b:8e:9c:c2:ae epair2a: link state changed to UP epair2b: link state changed to UP lo0: link state changed to UP lo0: link state changed to UP lo0: link state changed to UP lo0: link state changed to UP lo0: promiscuous mode enabled Fatal trap 12: page fault while in kernel mode cpuid = 0; apic id = 00 fault virtual address = 0x18 fault code = supervisor read data, page not present instruction pointer = 0x20:0xffffffff80c0f0e2 stack pointer = 0x28:0xfffffe008aef2980 frame pointer = 0x28:0xfffffe008aef29c0 code segment = base 0x0, limit 0xfffff, type 0x1b = DPL 0, pres 1, long 1, def32 0, gran 1 processor eflags = interrupt enabled, resume, IOPL = 0 current process = 12 (swi1: netisr 0) rdi: fffffe008aef29d8 rsi: fffff801ef62c296 rdx: 00000000ffffffff rcx: 0000000000008466 r8: fffffe008aef2900 r9: 0000000000000003 rax: 0000000000000000 rbx: 0000000000000000 rbp: fffffe008aef29c0 r10: 0000000000000001 r11: 0000000000000000 r12: 0000000000000000 r13: 000000000000000b r14: 000000000000000b r15: 00000000000001f5 trap number = 12 panic: page fault cpuid = 0 time = 1760542442 KDB: stack backtrace: #0 0xffffffff80bc02ed at kdb_backtrace+0x5d #1 0xffffffff80b736d6 at vpanic+0x136 #2 0xffffffff80b73593 at panic+0x43 #3 0xffffffff8107bf69 at trap_pfault+0x3c9 #4 0xffffffff81051d88 at calltrap+0x8 #5 0xffffffff80d84ab9 at in6_cksum_partial_l2+0x109 #6 0xffffffff8295cab5 at fr_cksum+0xa5 #7 0xffffffff829621dd at ipf_checkl4sum+0xbd #8 0xffffffff829586f6 at ipf_checkv6sum+0x56 #9 0xffffffff8295a601 at ipf_makefrip+0x1691 #10 0xffffffff8295b6de at ipf_check+0x15e #11 0xffffffff82958c28 at ipf_check_wrapper6+0x58 #12 0xffffffff80cc33f8 at pfil_mbuf_in+0x38 #13 0xffffffff80d92b34 at ip6_input+0x484 #14 0xffffffff80cc0c58 at swi_net+0x128 #15 0xffffffff80b2d309 at ithread_loop+0x239 #16 0xffffffff80b2989b at fork_exit+0x7b #17 0xffffffff81052dae at fork_trampoline+0xe Uptime: 1h42m22s Automatic reboot in 15 seconds - press a key on the console to abort + rc=0 + echo 'bhyve return code = 0' bhyve return code = 0 + sudo /usr/sbin/bhyvectl '--vm=testvm-15-amd64-73' --destroy + sh -ex freebsd-ci/scripts/test/extract-meta.sh + METAOUTDIR=meta-out + rm -fr meta-out + mkdir meta-out + tar xvf meta.tar -C meta-out x ./ x ./run-kyua.sh x ./auto-shutdown x ./disable-zfs-tests.sh x ./disable-notyet-tests.sh x ./disable-dtrace-tests.sh x ./run.sh + rm -f 'test-report.*' + mv 'meta-out/test-report.*' . mv: rename meta-out/test-report.* to ./test-report.*: No such file or directory + report=test-report.xml + [ -e freebsd-ci/jobs/FreeBSD-stable-15-amd64-test/xfail-list -a -e test-report.xml ] + rm -f disk-cam + jot 5 + rm -f disk1 + rm -f disk2 + rm -f disk3 + rm -f disk4 + rm -f disk5 + rm -f disk-test.img [PostBuildScript] - [INFO] Executing post build scripts. [FreeBSD-stable-15-amd64-test] $ /bin/sh -xe /tmp/jenkins14763399638756581000.sh + ./freebsd-ci/artifact/post-link.py Post link: {'job_name': 'FreeBSD-stable-15-amd64-test', 'commit': '9dab0e61a921b5f3c4db2e0e2b440aeb6a803e42', 'branch': 'stable-15', 'target': 'amd64', 'target_arch': 'amd64', 'link_type': 'latest_tested'} "Link created: stable-15/latest_tested/amd64/amd64 -> ../../9dab0e61a921b5f3c4db2e0e2b440aeb6a803e42/amd64/amd64\n" Recording test results ERROR: Step ‘Publish JUnit test result report’ failed: No test report files were found. Configuration error? Checking for post-build Performing post-build step Checking if email needs to be generated Email was triggered for: Failure - Any Sending email for trigger: Failure - Any Sending mail from default account using System Admin e-mail addresshelp
Want to link to this message? Use this
URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?808828242.1443.1760542459652>