Date: Mon, 26 Feb 2007 17:35:07 +0100 From: Alfred Bartsch <bartsch@dssgmbh.de> To: freebsd-scsi@freebsd.org Subject: Re: unable to create/delete array from LSI card using megaraid, megarc Message-ID: <200702261735.07783.bartsch@dssgmbh.de> In-Reply-To: <e6534e4a0702091504u441c224kffa3c63dbd9ff28f@mail.gmail.com> References: <e6534e4a0702091504u441c224kffa3c63dbd9ff28f@mail.gmail.com>
next in thread | previous in thread | raw e-mail | index | archive | help
Am Samstag, 10. Februar 2007 00:04 schrieb javocado: > I'm running 6.2-R and have installed linux-megamgr and megarc from > ports. Both utilities run fine, but neither will allow me to add or > remove an array from the system (I have to do it via the BIOS > utility). Relevant parts: > > # dmesg |grep amr > amr0: <LSILogic MegaRAID 1.53> mem 0xdf200000-0xdf20ffff irq 72 at > device 1.0 on pci8 > amr0: delete logical drives supported by controller > amr0: <LSILogic MegaRAID SCSI 320-1> Firmware 1L47, BIOS G121, 64MB RAM > amr0: delete logical drives supported by controller > amrd0: <LSILogic MegaRAID logical drive> on amr0 > amrd0: 70006MB (143372288 sectors) RAID 1 (optimal) > amrd1: <LSILogic MegaRAID logical drive> on amr0 > amrd1: 140013MB (286746624 sectors) RAID 1 (optimal) > > Is this normal, or do I have a misconfiguration? > -- This is IMHO some kind of accident control, try "# sysctl dev.amr.0.allow_volume_configure=1" before starting megarc/linux-megamgr. This should enable changes to the RAID configuration (replace 0 with 1 ... if you've got more than one MegaRAID-Controller in your server). HTH Alfred Bartsch mailto:<bartsch@dssgmbh.de>
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?200702261735.07783.bartsch>