Date: Tue, 12 May 2009 23:39:21 +0200 From: Per olof Ljungmark <peo@intersonic.se> To: Yani Karydis <yani@pi-greece.eu> Cc: freebsd-stable@freebsd.org Subject: Re: CAM Status: SCSI Status Error on 7.2-RELEASE Message-ID: <4A09EC89.5090400@intersonic.se> In-Reply-To: <4A098115.3040605@pi-greece.eu> References: <4A098115.3040605@pi-greece.eu>
next in thread | previous in thread | raw e-mail | index | archive | help
Yani Karydis wrote: > Hello, > > Since upgrading to 7.2-RELEASE, dmesg displays the following after > booting the system. > > (probe3:ahc0:0:3:0): TEST UNIT READY. CDB: 0 0 0 0 0 0 > (probe3:ahc0:0:3:0): CAM Status: SCSI Status Error > (probe3:ahc0:0:3:0): SCSI Status: Check Condition > (probe3:ahc0:0:3:0): UNIT ATTENTION asc:29,0 > (probe3:ahc0:0:3:0): Power on, reset, or bus device reset occurred > (probe3:ahc0:0:3:0): Retrying Command (per Sense Data) > (probe3:ahc0:0:3:0): TEST UNIT READY. CDB: 0 0 0 0 0 0 > (probe3:ahc0:0:3:0): CAM Status: SCSI Status Error > (probe3:ahc0:0:3:0): SCSI Status: Check Condition > (probe3:ahc0:0:3:0): NOT READY asc:3a,0 > (probe3:ahc0:0:3:0): Medium not present > (probe3:ahc0:0:3:0): Unretryable error > sa0 at ahc0 bus 0 target 3 lun 0 > sa0: <HP Ultrium 1-SCSI N2CG> Removable Sequential Access SCSI-3 device > sa0: 20.000MB/s transfers (10.000MHz, offset 8, 16bit) > <snip> FWIW, same here, 7.2-PRERELEASE #0: Thu Apr 16 08:42:45 CEST 2009 amd64 and HP Ultrium drive. Did not notice any harm though. -- per
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?4A09EC89.5090400>